Starplus Triad Xts Digital Key Telephone System System Programming And Operation Manual

DSS/BLF Console with Map3-19
Chapter 3 - Attendant Features and Operation
Map #3 -- By default is to be used with Map #2 in that it has the remaining stations, 148-195, 
to provide a full Station mapping. All of the buttons on Map #3 are flexible and can be 
changed by the user. This map can be duplicated on another DSS/DLS Console and assigned 
to the same station.
Figure 3-4: DSS Console Map #3 

3-20DSS/BLF Console with Map
Chapter 3 - Attendant Features and Operation
MAP #4 -- By default, CO Lines 1-48 appear in sequential order.
Figure 3-5: DSS Console Map #4 

DSS/BLF Console with Map3-21
Chapter 3 - Attendant Features and Operation
Map #5 -- By default, CO Lines 49-96 appear in sequential order. Provides the receiving 
station with CO Line buttons when used in conjunction with DSS Map #4 for a full 96 CO Line 
mapping. CO Line ringing on Maps 1, 4 and 5 is determined by CO Line Ringing Assignments.
Figure 3-6: DSS Console Map #5
Transfer Search
Description
Allows the Attendant to make a series of intercom calls without hanging up the handset.
Operation
An...

3-22Display Timer
Chapter 3 - Attendant Features and Operation
Station ID for DSS / BLF Console With Map
Description
Each system port must be programmed to identify the type of station that operate on that 
port. Each station type must be identified.
Programming Steps
1. Press the STATION ID flexible button (FLASH 50, Page B, Button #1).
2. Dial [1-5] on the  dial pad to identify the DSS map number. Refer to “Mapping Options” on 
page 3-16.
3. Enter a valid station number to which the DSS/BLF Console is...

ICLID Call Management Tables 3-23
Chapter 3 - Attendant Features and Operation
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT … Attendant Display Timer is set for 1 second.
ICLID Call Management Tables
Description
Two ICLID Call Management Tables are maintained in the system. These tables consist of an 
Answered Call Management Table and an Unanswered Call Management Table. Each have a 
100 entry capacity.
Answered Call Management Table
Description
The...

3-24Recall
Chapter 3 - Attendant Features and Operation
Unanswered Call Management Table
Description
An Unanswered Call Management Table with 100 entry capacity is maintained in the system. 
The calling number/name information pertaining to any unanswered call is placed in this 
table at the time the system determines the call was abandoned.
This table may be accessed from any display telephone to review unanswered calls. Only an 
Attendant station(s) can delete an entry from this table.
Operation
This...

Release Button3-25
Chapter 3 - Attendant Features and Operation
Attendant Recall Timer
Description
The Attendant Recall Timer determines the time a recalling call rings at the attendant 
station(s) before the system releases the line. When a CO Line recalls to the Attendant station 
and is still unanswered, the system releases the line at the expiration of this timer and 
automatically places the line to an idle condition.
The Attendant Recall Timer setting is variable from 00–60 minutes. An entry of 00...

3-26Speed Dial - System Storing
Chapter 3 - Attendant Features and Operation
Speed Dial - System Storing
System Speed numbers must be entered by the first programmed Attendant. If no Attendant 
is specified, enter at Station 100.
1. Press SPEED once, then press desired outside line key; or select an outside line 
automatically by pressing the SPEED button twice.
2. Dial the System Speed bin location (9020-9999).
3. Dial telephone number.
4. Press the SPEED button.
5. Hang up.

Pressing the TRANS button...

4
Call Distribution - ACD/UCD
This chapter covers the topics of Automatic Call Distribution (ACD) and Uniform Call
Distribution (UCD).