Sony Klv 17hr3 Operating Instructions
Have a look at the manual Sony Klv 17hr3 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 980 Sony manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
22 First Time Operation Switching On the TV and Automatically Tuning The first time you switch on your TV, a sequence of menu screens appear on the TV enabling you to: 1) choose the language of the menu screen 2) choose the country in which you are going to operate the TV, 3) search and store all available channels (TV Broadcast) and 4) change the order in which the channels (TV Broadcast) appear on the screen. However, if you need to change any of these settings at a later date, you can do that by selecting the appropriate option in the (Set Up menu) or by pressing and holding the Auto Start Up button on the right side of TV set for more than three seconds, see page 17. 1 Connect the adaptor to the TV as shown. Connect the mains lead to the adaptor. Connect the plug to the mains socket (220-240 AC, 50Hz). 2The first time that the TV set is connected, it is usually turned on. If the TV is off, press the on/off button to turn on the TV. The first time you switch on the TV, a Language menu appears automatically on the TV screen. 3Press the V, v, B or b buttons on the remote control to select your language, then press the OK button to confirm your selection. From now on all the menus will appear in your chosen language. 4The Country menu appears automatically. Press the v or V button to select the country in which you are using the TV. Press the OK button to confirm your selection. • If the country in which you want to use the TV set does not appear in the list, select “-” instead of a country. • To avoid wrong teletext characters for cyrillic languages we recommend selecting Russia if your own country does not appear in the list. First Time Operation Country Select country United Kingdom Ireland Nederland België/Belgique Luxembourg France Italia Schweiz/Suisse/Svizzera Deutschland Österreich
23 GB 5 The Auto Tuning menu appears on the screen. Press the OK button to select Yes. 6The TV starts to automatically search and store all available broadcast channels for you. This procedure could take some minutes. Please be patient and do not press any buttons, otherwise automatic tuning will not be completed. If no channels were found during the auto tune process, a message appears automatically on the screen asking you to connect the aerial. Check the aerial connection (refer to page 20). Press the OK button to restart the auto tuning process. 7After all available channels are captured and stored, the Programme Sorting menu automatically appears on the screen enabling you to change the order in which the channels are stored. a)If you wish to keep the broadcast channels in the tuned order, go to step 8. b)If you wish to store the channels in a different order: 1Press the v or V button to select the programme number with the channel (TV Broadcast) you wish to move. Press the b button. 2Press the v or V button to select the new programme number position for your selected channel (TV Broadcast). Press the OK button to store The selected channel now moves to its new programme position and the other channels move accordingly. 3Repeat steps b)1 and b)2 if you wish to change the order of the other channels. 8 Press the MENU button to remove the menu from the screen Auto tuning Programmes found: No channel found. Please connect aerial Confirm Programme Sorting Exit:MENU 01 02 03 04 05 06 07 08 09 10 11TVE TVE2 TV3 C33 C27 C58 S02 S06 C44 C47 C48 Programme Sorting Exit:MENU 01 02 03 0405 06 07 08 09 10 11TVE TVE2TV3 C33C27 C58 S02 S06 C44 C47 C4801 TVE Do you want to start automatic tuning? Ye sNo Your TV set is now ready for use First Time Operation
24 TV Functions Introducing and Using the Menu System Your TV set uses an On-Screen menu system to guide you through the operations. Use the following buttons on the Remote Control to operate the menu system: 1To switch on the menu screens: Press the MENU button to switch the first level menu on. Picture AdjustmentPicture Mode Contrast Brightness Colour Sharpness Backlight Reset Noise Reduction Colour Tone Select:Set:OKEnd:MENU Personal 80 50 50 50 70 Auto Normal TV Functions 2To navigate through the menus: • To highlight and select the desired menu or option, press v or V. • To enter the selected menu or option, press b. • To return to the last menu or option, press B. • To alter the settings of your selected option, press v/V/B or b. • To confirm and store your selection, press OK. 3To switch off the menu screens: Press the MENU button to remove the menu from the screen.
25 GB The Picture Adjustment Menu The “Picture Adjustment” menu allows you to alter the picture settings. To do this: Press the MENU button and then press OK to enter this menu. Next, press v or V to select the desired option and press OK. Finally, read below how to operate into each option. Picture Mode This option allows you to customise the picture mode based on the programme you are watching. After selecting this option press OK. Next, press repeatedly v or V to select: Live (for live broadcast programmes, DVD and Digital Set Top Box receivers). Personal (for individual settings). Movie (for films). Once you have selected your desired option, press OK to store. Brightness, Colour, Sharpness and Backlight level of Live and Movie mode are fixed on the factory to get the best picture quality. ContrastPress B or b to reduce or enhance picture contrast. Next, press OK to store. BrightnessPress B or b to darken or brighten the picture. Next, press OK to store. This option only appears and can only be adjusted if “Picture Mode” is set to “Personal”. ColourPress B or b to decrease or to increase color intensity. Next press OK to store. This option only appears and can only be adjusted if “Picture Mode” is set to “Personal”. HuePress B or b to decrease or to increase the green tones. Next press OK to store. This option only appears for NTSC signal (e.g. USA video tapes). SharpnessPress B or b to soften or to sharpen the picture. Next press OK to store. This option only appears and can only be adjusted if “Picture Mode” is set to “Personal”. BacklightPress B or b to darken or brighten the backlight. This option only appears and can only be adjusted if “Picture Mode” is set to “Personal”. TV Functions , Picture AdjustmentPicture Mode Contrast Brightness Colour Sharpness Backlight Reset Noise Reduction Colour Tone Select:Set:OKEnd:MENU Personal 80 50 50 50 70 Auto Normal Picture AdjustmentPersonal 80 50 50 50 70 Auto Normal Picture Mode Contrast Brightness Colour Sharpness Backlight Reset Noise Reduction Colour Tone Select:Set:OKEnd:MENUBack: continued...
26 ResetPress OK to reset the picture to the factory preset levels. Noise This option is set to Auto to automatically reduce the snowy picture visible in the weak broadcast Reduction signal. However, it can be modified. After selecting this option press b. Next, press v or V to select Off. Finally, press OK to store. Colour ToneThis option allows you to alter the tint of the picture. After selecting this option press b. Next, press repeatedly v or V to select: Warm (gives the white colours a red tint), Normal (gives the white colours a neutral tint), Cool (gives the white colours a blue tint). Finally press OK to store. TV Functions
27 GB The Sound Adjustment Menu The “Sound Adjustment” menu allows you to alter the sound settings. To do this: Press the MENU button and press v to select , then press OK to enter this menu. Next, press v or V to select the desired option and press OK. Finally, read below how to operate into each option. SoundThis option allows you to customise the sound effect. After selecting this Effectoption press OK. Next, press repeatedly v or V to select: NaturalEnhances clarity, detail and presence of sound by using “BBE High Definition Sound system”*. Dynamic“BBE High Definition Sound system”* intensifies clarity and presence of sound for better intelligibility and musical realism. OffFlat response. Once you have selected your desired option, press OK to store. This function has no effect on headphones sound. TreblePress B or b to decrease or to increase higher-frequency sounds. Next, press OK to store. BassPress B or b to decrease or to increase the lower-frequency sounds. Next, press OK to store. BalancePress B or b to emphasise the left or the right speaker. Next, press OK to store. ResetPress OK to reset the sound to the factory preset levels. Dual Press b. Next: Sound• For a Stereo broadcast: Press v or V to select Stereo or Mono. Next press OK to store. • For a bilingual broadcast: Press v or V to select Mono (for mono channel if available), A (for channel 1) or B (for channel 2). Next press OK to store. Auto Press b. Next press v or V to select On (the volume level of the channels will Volumestay the same, independent of the broadcast signal, e.g. in the case of advertisements) or Off (the volume level changes according to the broadcast signal). Next press OK to store. This function has no effect on headphones sound. * The “BBE High Definition Sound system” is manufactured by Sony Corporation under license from BBE Sound, Inc. It is covered by U.S. Patent No. 4,638,258 and No. 4,482,866. The word “BBE” and BBE Symbol are trademarks of BBE Sound, Inc. TV Functions , m Picture AdjustmentPicture Mode Contrast Brightness Colour Sharpness Backlight Reset Noise Reduction Colour Tone Select:Set:OKEnd:MENU Personal 80 50 50 50 70 Auto Normal Sound Effect Treble Bass Balance Reset Dual Sound Auto VolumeNatural 0 0 0 Stereo OffSound Adjustment Select:Set:OKEnd:MENU Sound AdjustmentSound Effect Treble Bass Balance Reset Dual Sound Auto VolumeNatural 0 0 0 Stereo Off Select:Set:OKEnd:MENUBack:
28 The Features Menu The “Features” menu allows you to alter various settings of the TV. To do this: Press the MENU button and press v twice to select , then press OK to enter this menu. Next, press v or V to select the desired option and press OK. Finally, read below how to operate into each option. POWER SAVING This option allows you to reduce the power consumption of this TV. To d o t h i s : After selecting the option, press OK. Then, press v or V to select Reduce. Next, press OK to store. AUTO FORMAT This option allows you to automatically change the aspect ratio of the screen. To do this: After selecting the option, press OK. Then, press v or V to select On (if you wish the TV set to automatically switch the screen format according to the broadcast signal) or Off (if you wish to keep your preference). Finally, press OK to store. Even if you have selected “On” or “Off”, you can always modify the format of the screen by pressing repeatedly on the remote control to select one of the following formats: SMART:Imitation of wide screen effect for 4:3 broadcast. 4:3:Conventional 4:3 picture size, full picture information. 14:9:Compromise between 4:3 and 16:9 picture size. ZOOM:Widescreen format for letterbox movies. WIDE:For 16:9 broadcast. Full picture information. • In “SMART”, “ZOOM” and “14/9” modes, parts of the top and bottom of the screen are cut off. Press v or V to adjust the position of the image on the screen (e.g. to read subtitles). • According to the format of diffussion, black bands can always appear whatever the selected mode. TV Functions , m Picture AdjustmentPicture Mode Contrast Brightness Colour Sharpness Backlight Reset Noise Reduction Colour Tone Select:Set:OKEnd:MENU Personal 80 50 50 50 70 Auto Normal Power Saving Auto Format TV Speakers RGB CenterStandard Off On 0Features Select:Set:OKEnd:MENU FeaturesPower SavingAuto FormatTV Speakers RGB CenterStandard Off On 0 Select:Set:OKEnd:MENUBack: 4:3 ZOOM 14:9 WIDE SMART
29 GB TV SPEAKERS This option allows you to turn off the TV speakers e.g. to listen to the sound through external audio equipment con- nected to the TV. To do this: Press the v or V buttons to select one of the following options, then press the OK button. OnThe sound is output from the TV speakers. One Time OffThe TV speakers are temporarily turned off allowing you to listen to the sound from external audio equipment. The TV Speakers option automatically returns to On when the TV set is switched off. Permanent OffThe TV speakers are permanently turned off allowing you to listen to the sound from external audio equipment. To turn on the TV speakers again, change the TV Speakers option to On. RGB CENTER This option is only available if an RGB source has been connected to the Scart connector 1/1 on the rear of TV. When viewing an RGB signal, the picture may need some adjusting. This option allows you to adjust the horizontal picture position so that the picture is in the middle of the screen. To do this: Once you have entered the Features menu as it is explained in on page 28 and while watching an RGB source select the “RGB Center” option and press OK. Then press B or b to adjust the centre of the picture between –5 and +5. Finally press OK to confirm and store. TV Functions
30 The Set Up Menu The “Set Up” menu allows you to alter various options on this TV. To do this: Press the MENU button and press v three times to select , then press OK to enter this menu. Next, press v or V to select the desired option and press OK. Finally, read below how to operate into each option. LANGUAGE This option allows you to select the language that menus are displayed in. To do this: After selecting the option, press OK and then proceed in the same way as in step 3 of the section Switching On the TV and Automatically Tuning on page 22. COUNTRY This option allows you to select the country in which you wish to operate the TV set. To do this: After selecting the option, press OK and then proceed in the same way as in step 4 of the section Switching On the TV and Automatically Tuning on page 22. AUTO TUNING This option allows you to automatically search for and store all available TV channels. To do this: After selecting the option, press OK and then proceed in the same way as in the steps 5 and 6 of the section “Switching On the TV and Automatically Tuning” on page 23. PROGRAMME SORTING This option allows you to change the order in which the channels (TV Broadcast) appear on the screen. To do this: After selecting the option, press OK and then proceed in the same way as in the step 7 of the section “Switching On the TV and Automatically Tuning” on page 23. TV Functions , m Picture AdjustmentPicture Mode Contrast Brightness Colour Sharpness Backlight Reset Noise Reduction Colour Tone Select:Set:OKEnd:MENU Personal 80 50 50 50 70 Auto Normal Language Country Auto Tuning Programme Sorting Programme Labels AV Preset Manual Programme PresetEnglish United KingdomSet Up Select:Set:OKEnd:MENU Set UpLanguage Country Auto Tuning Programme Sorting Programme Labels AV Preset Manual Programme PresetEnglishUnited Kingdom Select:Set:OKEnd:MENUBack:
31 GB PROGRAMME LABELS This option allows you to name a channel using up to five characters (letters or numbers). To do this: 1Once you have entered the Set Up menu as it is explained in the previous page and after selecting this option, press OK, then press v or V to select the programme number with the channel you wish to name. Next press OK. 2With the first element of the Label column highlighted, press OK and v, V, B or b to select the letter, next press OK. When you have finished, press v, V, B or b to select the word “End” on the screen and finally press OK to turn off the menu from the screen. • To correct a letter, select % on the screen to go back and press OK. • For a blank, select on the screen and press OK. AV PRESET This option allows you to: a) Designate a name to the external equipment you have connected to the input sockets of the TV set. To do this: 1Once you have entered the Set Up menu as it is explained in the previous page and after selecting this option, press OK, then press v or V to select the input source you wish to name: AV1 for the rear Scart and AV2 for side connectors. Next press OK twice. 2 A label automatically appears in the label column: a) If you want to use one of the predefined labels, press v or V to select the desired label and finally press OK. The total predefined labels are: VIDEO, DVD, CABLE, GAME, CAM (camcorder) or SAT (satellite). b) If you want to set a different label, select Edit and press OK. Then, with the first element highlighted, press v, V, B or b to select the letter, next press OK. When you have finished, press v, V, B or b to select the word “End” on the screen and finally press OK to turn off the menu from the screen. • To correct the letter, select % on the screen to go back and press OK. • For a blank, select on the screen and press OK. b) Change the input sound level of the optional equipment connected. To do this: Once you have entered the Set Up menu as it is explained in the previous page and after selecting this option press OK, then press v or V to select the input source you want to alter the input sound level: AV1 for the rear Scart and AV2 for side connectors. Next press twice b to highlight the Sound Offset column. Finally press OK and v or V to alter the input sound level between -9 and +9. TV Functions continued...