Smarthome Fx 416 Instruction Manual

							KCE Technology Corporation35 No Ring for Alarm/TimerYou may set the extension not to ring for any alarm or timer.
How:
To disable ringing
      JKL
5
  GHI
4DEF
3ABC
21
  #
  beep
beep1OPER
0
  ABC
2JKL
5MNO
6
  #
  beep
beep      1. Lift the handset
   2. Validate the password if a password has been programmed in, otherwise go to step 3
   3. Dial [*10 256 #]
   4. Wait for confirmation tone
   5. Hang up
To enable ringing
      JKL
5
  GHI
4DEF
3ABC
21
  #
  beep
beep11
  ABC
2JKL
5MNO
6
  #
  beep
beep      1. Lift the handset
   2. Validate the password if a password has been programmed in, otherwise go to step 3
   3. Dial [*11 256 #]
   4. Wait for confirmation tone
   5. Hang up 
						

							KCE Technology Corporation36 Setting Call ForwardingForward your call to another extension, to the Operator Station, to a Voice Mailbox (if equipped
with a voice mail system), to an outside phone number, or to a pager.  When the call forwarding is
set, the call forwarding is enabled automatically.
How:
To forward to Operator Station/Ring-All
      JKL
5
  GHI
4DEF
3ABC
21
  #
  beep
beepABC
21
  ABC
2OPER
0OPER
0
  #
  beep
beep      1. Lift the handset
   2. Validate the password if a password has been programmed in, otherwise go to step 3
   3. Dial [*21 200 #], will go to Ring-All if the system has no Operator Station
   4. Wait for confirmation tone
   5. Hang up
To forward to an extension
      JKL
5
  GHI
4DEF
3ABC
21
  #
  beep
beepABC
21
  ABC
21DEF
3
  #
  beep
beep      1. Lift the handset
   2. Validate the password if a password has been programmed in, otherwise go to step 3
   3. Dial [*21 213 #], will forward calls to extension 213
   4. Wait for confirmation tone
   5. Hang up
To enable forwarding (after call forwarding disabled)
      JKL
5
  GHI
4DEF
3ABC
21
  #
  beep
beepABC
21
  #
  beep
beep      1. Lift the handset
   2. Validate the password if a password has been programmed in, otherwise go to step 3
   3. Dial [*21 #]
   4. Wait for confirmation tone
   5. Hang up 
						

							KCE Technology Corporation37 Call Forwarding to Voice MailboxYou may forward the incoming calls to a voice mailbox if a voice mail system is installed.
How:
To forward to your voice mailbox
      JKL
5
  GHI
4DEF
3ABC
21
  #
  beep
beepABC
21
  ABC
2GHI
4JKL
5
  #
  beep
beep      1. Lift the handset
   2. Validate the password if a password has been programmed in, otherwise go to step 3
   3. Dial [*21 245 #]
   4. Wait for confirmation tone
   5. Hang up
To forward to a selected extension’s voice mailbox
      JKL
5
  GHI
4DEF
3ABC
21
  #
  beep
beepABC
21
  ABC
2GHI
4JKL
5
  ABC
21GHI
4
  #
  beep
beep      1. Lift the handset
   2. Validate the password if a password has been programmed in, otherwise go to step 3
   3. Dial [*21 245 * 212 #], where 212 is the extension number of the voice
mailbox to be forwarded to
   4. Wait for confirmation tone
   5. Hang up
Disabling Call ForwardingYou may disable the call forwarding function set on your extension.  However, the destination of
the call forwarding you have programmed will be preserved in the system memory until it is
overwritten.
How:
To disable forwarding
      JKL
5
  GHI
4DEF
3ABC
21
  #
  beep
beepABC
2OPER
0
  #
  beep
beep      1. Lift the handset
   2. Validate the password if a password has been programmed in, otherwise go to step 3
   3. Dial [*20#]
   4. Wait for confirmation tone
   5. Hang up 
						

							KCE Technology Corporation38 Enabling Call ForwardingReactivate the call forwarding function with all the parameters previously set on your extension.
How:
To enable forwarding (after call forwarding disabled)
      JKL
5
  GHI
4DEF
3ABC
21
  #
  beep
beepABC
21
  #
  beep
beep      1. Lift the handset
   2. Validate the password if a password has been programmed in, otherwise go to step 3
   3. Dial [*21#]
   4. Wait for confirmation tone
   5. Hang up
Call Forwarding to Another Phone NumberYou may forward the incoming calls to another phone number.  The FX-416 will use an available
CO line to dial the phone number pre-programmed by you, then connect the outside caller to the
specified phone number.  Outside caller will hear busy tones if no CO line is available during call
forwarding.  The phone number will not be erased even the function is disabled.  You may change
the phone number by re-programming a new number into the system.
How:
To forward to another phone number
      JKL
5
  GHI
4DEF
3ABC
21
  #
  beep
beepABC
2ABC
2
  MNO
6ABC
2MNO
611TUV
8TUV
8
  #
  beep
beep      1. Lift the handset
   2. Validate the password if a password has been programmed in, otherwise go to step 3
   3. Dial [*22 Number #], where Number is the phone number to be forwarded
to (e.g. 6261188 is the phone number shown above)
   4. Wait for confirmation tone
   5. Hang up
To enable forwarding
      JKL
5
  GHI
4DEF
3ABC
21
  #
  beep
beepABC
2ABC
2
  #
  beep
beep      1. Lift the handset
   2. Validate the password if a password has been programmed in, otherwise go to step 3
   3. Dial [*22#]
   4. Wait for confirmation tone
   5. Hang up 
						

							KCE Technology Corporation39 Playback of Stored Forwarding Phone NumberPlay back the forwarding phone number you have programmed for the extension.
How:
To play back
      JKL
5
  GHI
4DEF
3ABC
21
  #
  beep
beepABC
2ABC
2  #
  beep
beep   talk      1. Lift the handset
   2. Validate the password if a password has been programmed in, otherwise go to step 3
   3. Dial [*22*#]
   4. Wait for confirmation tone
   5. System plays back the phone number
   6. Hang up
Call Forwarding to a PagerYou may forward the incoming calls to a pager.  The FX-416 will announce a short message to
the caller, then use an available CO line to dial the pager number pre-programmed by you.
Outside caller will hear busy tones if no CO line is available during call forwarding.  You may
change the pager number by re-programming a new number into the system.
How:
To store a pager number
      JKL
5
  GHI
4DEF
3ABC
21
  #
  beep
beepABC
2DEF
3
  ABC
21ABC
2MNO
6MNO
6TUV
8TUV
8
  #
  beep
beep      1. Lift the handset
   2. Validate the password if a password has been programmed in, otherwise go to step 3
   3. Dial [*23 {Pager#} #], where {Pager#} is the pager number to be forwarded to (e.g.
2126688 is the pager number shown above)
   4. Wait for confirmation tone
   5. Hang up
To enable call forwarding
      JKL
5
  GHI
4DEF
3ABC
21
  #
  beep
beepABC
2DEF
3
  #
  beep
beep      1. Lift the handset
   2. Validate the password if a password has been programmed in, otherwise go to step 3
   3. Dial [*23#]
   4. Wait for confirmation tone
   5. Hang up 
						

							KCE Technology Corporation40 Playback of Stored Pager NumberThe FX-416 will play back the forwarding pager number you have programmed for the extension.
How:
To play back
      JKL
5
  GHI
4DEF
3ABC
21
  #
  beep
beepABC
2DEF
3  #
  beep
beep   talk      1. Lift the handset
   2. Validate the password if a password has been programmed in, otherwise go to step 3
   3. Dial [*23*#]
   4. Wait for confirmation tone
   5. System plays back the pager number
   6. Hang up 
						

							KCE Technology Corporation41 Setting Daily On/Off Time for Call Forwarding OptionYou may set daily On/Off time for the call forwarding option you have selected.  Once the On/Off
time is set and enabled the FX-416 will only forward your call during the ON time and disable the
call forwarding function during the OFF time.
How:
To set On/Off time
      JKL
5
  GHI
4DEF
3ABC
21
  #
  beep
beepABC
2TUV
8
  1TUV
8OPER
0OPER
0
  OPER
0WXY
9OPER
0OPER
0
  #
  beep
beep      1. Lift the handset
   2. Validate the password if a password has been programmed in, otherwise go to step 3
   3. Dial [*28 {hr}{min} * {hr}{min} #], where the {hr} = hour (use 24 hour clock) and {min} =
minute (00 to 59), the first {hr}{min} (1800 = 6:00 p.m.) is the On time and the second
{hr}{min} (0900=09:00 a.m.) is the Off time
   4. Wait for confirmation tone
   5. Hang up
To enable On/Off time mode
      JKL
5
  GHI
4DEF
3ABC
21
  #
  beep
beepABC
2TUV
8
  1
  #
  beep
beep      1. Lift the handset
   2. Validate the password if a password has been programmed in, otherwise go to step 3
   3. Dial [*281#] to enable the On/Off time mode
   4. Wait for confirmation tone
   5. Hang up
To disable On/Off time mode
      JKL
5
  GHI
4DEF
3ABC
21
  #
  beep
beepABC
2TUV
8
  OPER
0
  #
  beep
beep      1. Lift the handset
   2. Validate the password if a password has been programmed in, otherwise go to step 3
   3. Dial [*280#] to disable the On/Off time mode
   4. Wait for confirmation tone
   5. Hang up 
						

							KCE Technology Corporation42 Playback of Stored Daily On/Off TimeYou may verify the On/Off time for call forwarding that stored in the system.
How:
To play back
      JKL
5
  GHI
4DEF
3ABC
21
  #
  beep
beepABC
2TUV
8  #
  beep
beep   talk      1. Lift the handset
   2. Validate the password if a password has been programmed in, otherwise go to step 3
   3. Dial [*28*#]
   4. Wait for confirmation tone
   5. System plays back the ON time and OFF time
   6. Hang up 
						

							KCE Technology Corporation43 Setting Alarm/TimerThe FX-16 has a built-in clock that can be used as an Alarm Clock or Timer.  A total of 8
different groups of Alarm/Timer in 10 different modes that you can program.  The following is the
programming table of Alarm /Timer:
Mode0123456789SettingTimerMon.Tue.Wed.Thur.Fri.Sat.Sun.WeekdayWeekendHow:
To set alarm time and mode
      JKL
5
  GHI
4DEF
3ABC
21
  #
  beep
beepDEF
3
  1
 1JKL
5DEF
3OPER
0
  WXY
9
  #
   1. Lift the handset
   2. Validate the password if a password has been programmed in, otherwise go to step 3
   3. Dial [*3 G {hr}{min} X #], where G is the group number (1 to 8), the {hr} = hour (use 24
hour clock) and {min} = minute (00 to 59) is the alarm time, and X is the mode (0 to 9)
   4. Wait for confirmation tone
   5. Hang up
   Example: Dial [*3115309#] to set alarm time for group 1 that the alarm goes off on every
weekend at 15:30 (3:30 p.m.).
To set alarm time and mode (Once Only)
      JKL
5
  GHI
4DEF
3ABC
21
  #
  beep
beepDEF
3
  JKL
5
 ABC
2OPER
0DEF
3OPER
0
  TUV
8
  1
  #
   1. Lift the handset
   2. Validate the password if a password has been programmed in, otherwise go to step 3
   3. Dial [*3 G {hr}{min} X 1 #], where G is the group number (1 to 8), the {hr} = hour (use
24 hour clock) and {min} = minute (00 to 59) is the alarm time, X is the mode (0 to 9) and
1 means the alarm goes off once for that week only
   4. Wait for confirmation tone
   5. Hang up
   Example: Dial [*35203081#] to set alarm time for group 5 that the alarm goes off on weekday
at 20:30 (8:30 p.m.) for that week only. 
						

							KCE Technology Corporation44 To set timer
      JKL
5
  GHI
4DEF
3ABC
21
  #
  beep
beepDEF
3
  PRS
7
 OPER
0ABC
21JKL
5
  OPER
0
  #
   1. Lift the handset
   2. Validate the password if a password has been programmed in, otherwise go to step 3
   3. Dial [*3 G 0215 0 #], where G is the group number, 0215 means the timer will trigger 2
hours and 15 minutes from the set time (maximum 24 hours), and the last 0 represents Timer
mode
   4. Wait for confirmation tone
   5. Hang up
To enable all alarm/timer
      JKL
5
  GHI
4DEF
3ABC
21
  #
  beep
beepDEF
3
  WXY
9
  1
  #
  beep
beep      1. Lift the handset
   2. Validate the password if a password has been programmed in, otherwise go to step 3
   3. Dial [* 391#] to enable all alarm/timer settings
   4. Wait for confirmation tone
   5. Hang up
To disable all alarm/timer
      JKL
5
  GHI
4DEF
3ABC
21
  #
  beep
beepDEF
3
  WXY
9
  OPER
0
  #
  beep
beep      1. Lift the handset
   2. Validate the password if a password has been programmed in, otherwise go to step 3
   3. Dial [*390#] to disable all alarm/timer settings
   4. Wait for confirmation tone
   5. Hang up
To clear a group’s alarm/timer setting
      JKL
5
  GHI
4DEF
3ABC
21
  #
  beep
beepDEF
3
  PRS
7
  #
  beep
beep      1. Lift the handset
   2. Validate the password if a password has been programmed in, otherwise go to step 3
   3. Dial [*3 G #], where G is the group number
   4. Wait for confirmation tone
   5. Hang up