Sharp Mx 3501 N Manual

109
I-Fax Settings
I-Fax Default Settings
These settings are used to configure the default settings for Internet fax.
Touch the [Image Send Settings] key, the [I-Fax Settings] key, and the [I-Fax Default Settings] key, and configure the 
settings.
I-Fax Own Name and Address Set
This is used to configure the sender name and address 
for Internet fax. The entered sender name and address 
are printed at the top of each fax page you send.
1Touch the [Name] key and enter the 
name.
A maximum of 40 characters...

110
Transaction Report Print Select 
Setting
This is used to select whether or not a transaction report 
will be printed, and if printed, the condition for being 
printed. Select a setting for each of the following 
operations:
Single Sending
 Print Out All Report:
Print a report after each transmission.
 Print Out Error Report Only:
Print a report when transmission fails.
 No Printed Report:
Never print a report.
Broadcasting
 Print Out All Report:
Print a report after each broadcast transmission.
...

111
I-Fax Send Settings
I-Fax Send Settings are described below.
Touch the [Image Send Settings] key, the [I-Fax Settings] key, and the [I-Fax Send Settings] key, and configure the 
settings.
I-Fax Reception Report On/Off 
Setting
This setting is used to request a reception report when 
an Internet fax is sent.
The reception report is returned to the sender address 
stored in I-Fax Own Name and Address Set.
To enable this setting, select the checkbox   and 
touch the [OK] key.
I-Fax Reception Report...

112
I-Fax Receive Settings
I-Fax Receive Settings are described below.
Touch the [Image Send Settings] key, the [I-Fax Settings] key, and touch the [I-Fax Receive Settings] key, and configure the settings.
Auto Receive Reduce Setting
When a fax is received that includes the senders name 
and number, the received image is slightly larger than 
the standard size. This setting is used to automatically 
reduce the image to fit the standard size.
To enable this setting, select the checkbox   and 
touch the...

113
Anti Junk Mail/Domain Name Setting
This setting is used to allow or refuse reception from 
specified addresses/domains.
To refuse reception from specified addresses/domains, 
select the [Reject Reception] key and touch the [OK] 
key.
When permitting only reception from the address or the 
domain that you program, touch the [Allow Reception] 
key and then the [OK] key.
To allow reception from all addresses/domains even 
when there are addresses/domains specified, select [All 
Invalid].
Up to 50...

114
Document Filing Settings
Document filing settings are described below. Touch the [Document Filing Settings] key and configure the settings.
Default Mode Settings
This is used to specify which mode, Sharing or 
Confidential, is used as the default mode when storing a 
file.
When [Confidential Mode] is selected, the [Confidential] 
checkbox in the file information screen will be selected 
.
Select one of the keys and touch the [OK] key.
Sort Method Setting
This setting is used to select the order of...

115
Default Exposure Settings
This setting is used to adjust the exposure level for 
scanning in document filing mode.
Exposure
The exposure can be adjusted automatically or 
manually. Select either the [Auto] key or the [Manual] 
key. If you selected [Manual], specify the exposure 
with the   keys. Lower the level toward 1 for 
lighter exposure or raise the level toward 5 for darker 
exposure.
Original Image Type
The exposure mode can be selected to match the 
original type. Select the desired key.
...

116
List Print (Administrator)
This is used to print lists and reports that are only for use by the administrator of the machine. Touch the [List Print 
(Administrator)] key and configure the settings.
Administrator Settings List
Lists of the administrator settings for the following modes 
can be printed. • Copy
Print
 Image Send
 Document Filing
 Security
Common
 All Administrator Settings List
Touch the desired key. Printing will begin.
Image Sending Activity Report
The following Image Sending...

117
Security Settings
The following settings are related to security. Touch the [Security Settings] key and configure the settings.
SSL Settings
SSL transmission can be applied to a data transmission 
on the network.
SSL is the protocol enable to encrypt the data and 
receive and send it. Encrypting data makes it possible to 
transmit and receive sensitive information safely.
SSL can be enabled for the following protocols:
 HTTPS: Use SSL encryption for the exchange of 
information between a Web server...

118
Enable/Disable Settings
The following settings are used to prohibit the use of certain functions. Touch the [Enable/Disable Settings] key and 
configure the settings.
User Control
Disabling of Printing by Invalid User
Printing by users who do not enter valid user 
information in the printer driver or who are not stored 
in the machine for FTP push print or other direct print 
jobs can be prohibited.
To enable this setting, select the checkbox   and 
touch the [OK] key.
Operation Settings
Cancel Auto...