Sharp Mx 3501 N Manual

22
INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER
USING THE STANDARD WINDOWS PS PRINTER 
DRIVER (Windows 98/Me/NT 4.0)
If the PS3 expansion kit is installed on the machine and you wish to use the standard Windows 98/Me/NT 4.0 PS printer 
driver, follow the steps below to install the PPD driver using the Add Printer Wizard.
1Click the [Start] button, select 
[Settings] and then click [Printers].
2Insert the Software CD-ROM into your 
computers CD-ROM drive.
Insert the Software CD-ROM that shows Disc 1 on...

23
INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER
CONFIGURING THE PRINTER DRIVER FOR THE 
OPTIONS INSTALLED ON THE MACHINE
After installing the printer driver, you must configure the printer driver settings appropriately for the options that have 
been installed and the size and type of paper loaded in the machine. Follow the steps below to configure the printer 
driver.
XWhen the PCL printer driver or PS printer driver is installed
1Click the [start] button and then click 
[Printers and Faxes].
In...

24
INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER
5Configure the image of the machine.
An image of the machine is formed in the printer driver 
configuration window based on the options that are 
installed.
(1) Select the options that are installed on 
the machine.
(2) Click the [OK] button.
6Click the [OK] butto n in the printer 
properties window.
To cancel the image sett ings, click the [Cancel] 
button.
(1)(2)
If automatic configuration fa ils, configure the settings manually.
• You can check the...

25
INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER
XWhen the PPD driver is installed
1Click the [start] button and then click 
[Printers and Faxes].
In Windows 98/Me/NT 4.0/2000, click the [Start] button, 
select [Settings], and then click [Printers].
2Open the printer properties window.
(1) Click the printer driver icon of the 
machine.
(2) Click the [File] menu.
(3) Select [Properties].
3Configure the printer driver for the 
options installed on the machine.
(1) Click the [Device Settings] tab.
In...

26
INSTALLING THE PRINTER STATUS 
MONITOR
Printer Status Monitor is a printer utility that allows general users to check the current status of the machine on their 
computer screen, such as whether or not the machine is ready to print. The Printer Status Monitor shows error 
information (paper misfeeds and other error conditions), printer configuration information in the form of an image (the 
number of trays and whether or not a finisher or other device is installed), the paper sizes that can be used,...

27
INSTALLING THE PRINTER STATUS MONITOR
7Follow the on-screen instructions.
8When the installation completed screen 
appears, click the [Finish] button.
To have the Printer Status Monitor start automatically 
when your computer is started, select the [Add this 
program to your Startup folder] checkbox   and click 
the [Finish] button.
9Click the [Close] button in the window 
of step 6.
This completes the installation.
For the procedures for using the Printer Status Monitor, see the Help file. Follow...

28
INSTALLING THE SCANNER DRIVER
The scanner driver (TWAIN driver) can only be used when the machine is connected to a network. When the scanner 
driver is installed, PC scan mode of the image send function can be used.
Supported operating systems: Windows 98/Me/2000
*/XP*/Server 2003*
* Administrators rights are required to install the software.
1Insert the Software CD-ROM into your 
computers CD-ROM drive.
Insert the Software CD-ROM that shows Disc 2 on the 
front of the CD-ROM.
2Click the [start]...

29
INSTALLING THE SCANNER DRIVER
9Click the [Close] button in the window 
of step 6.
This completes the installation. Next, configure the 
IP address of the machine in the scanner driver.
When the scanner driver is installed, the Select Device 
utility is also installed.
The IP address of the machine is configured in the 
scanner driver using Select Device.
10Click the [start] button, select [All 
Programs] ([Programs] in versions of 
Windows other than Windows 
XP/Server 2003), select [SHARP MFP 
TWAIN...

30
This section explains how to install the PPD file to enable printing from a Macintosh and how to configure the printer 
driver settings. The procedures vary by operating system version.
☞MAC OS X (v10.3.3 TO 10.4): this page
☞MAC OS X (v10.2.8): page 33
☞MAC OS X (v10.1.5): page 36
☞MAC OS 9.0 TO 9.2.2: page 38
MAC OS X (v10.3.3 TO 10.4)
1Insert the Software CD-ROM into your 
computers CD-ROM drive.
Insert the Software CD-ROM that shows Disc 2 on the 
front of the CD-ROM.
2Double-click the [CD-ROM]...

31
MAC OS X (v10.3.3 TO 10.4)
7The License Agreement window will 
appear. Make sure that you understand 
the contents of the license agreement 
and then click the [Continue] button.
A message will appear asking you if you agree to the 
terms of the license. Click the [Agree] button.
8Select the hard drive where the PPD file 
will be installed and click the [Continue] 
button.
Be sure to select the hard drive on which your operating 
system is installed.
9Click the [Install] button.
Installation begins....