Sharp Mx 3501 N Manual

99
B/W 600dpi x 600dpi Scanning 
Mode for Document Feeder
The resolution for copying in black and white using the 
automatic document feeder can be changed from 
600 x 300 dpi to 600 x 600 dpi (high quality mode).
When high quality mode is used, fine print and thin lines 
are reproduced with greater clarity, however, the 
scanning speed is slower.
To enable this setting, select the checkbox   and 
touch the [OK] key.
B/W Quick Scan from Document 
Glass
The resolution for copying in black and white using...

100
Network Settings
Network settings are described below. Touch the [Network Settings] key and configure the settings.
IP Address Setting
When using the machine on a TCP/IP network, use this 
setting to configure the IP address of the machine.
Make sure that the [DHCP] checkbox is not selected   
and then select each key, enter the required values with 
the numeric keys, and touch the [OK] key.
To set the machine to obtain an IP address 
automatically, select the [DHCP] checkbox  and 
touch the [OK]...

101
Printer Settings
Default Settings
Printer condition settings are described below.
Touch the [Printer Settings] key, touch the [Default Settings] key, and configure the settings.
Prohibit Notice Page Printing
This setting is used to disable printing of notice pages.
To enable this setting, select the checkbox   and 
touch the [OK] key.
Prohibit Test Page Printing
This setting is used to disable printing of test pages. 
When this setting is enabled, Printer Test Page in the 
system settings cannot be...

102
Interface Settings
These settings are used to control and monitor data transmitted to the USB port or network port of the machine.
Touch the [Printer Settings] key, touch the [Interface Settings] key, and configure the settings.
Hexadecimal Dump Mode
This function is used to print the print data from a 
computer in hexadecimal format together with the 
corresponding ASCII text. This allows you to check 
whether or not print data from the computer is being 
transmitted to the machine correctly....

103
Port Switching Method
This setting is used to select when port switching takes 
place.
 Switch at End of Job:
The port changes to auto selection when printing 
ends.
 Switch after I/O Timeout:
When the time set in I/O Timeout (page 102) 
elapses, the port changes to auto selection.
Select one of the keys and touch the [OK] key.
Color Adjustments
This is used to adjust grayscale and color balance.
Touch [Printer Settings] key and touch the [Color Adjustments] key and configure the settings.
Auto...

104
Image Send Settings
Scan, Internet fax, and fax settings are described below.
Operation Settings
Scan, Internet fax, and fax settings are described below.
Touch the [Image Send Settings] key, touch the [Operation Settings] key, and configure the settings.
Default Display Setting
Five screen selections are available for the base screen 
that appears when you press the [IMAGE SEND] key, or 
when you press the [CLEAR ALL] key ( ) in image 
send mode.•Scan
 Internet Fax
Fax
 Address Book (ABC)
...

105
Must Input Next Address Key at 
Broadcast Setting
This setting is used to require that the [Next Address] 
key be touched before the next address is entered when 
performing a broadcast transmission.
When this setting is enabled, the [Next Address] key 
cannot be omitted even if the next address is entered 
with a one-touch key.
If a user attempts to enter the next address without 
touching the [Next Address] key, a double-beep alarm 
will sound and the entry will be rejected.
To enable this setting,...

106
Settings to Disable the 
Registration of Destination
This is used to prohibit the storing of destinations. 
Storing from the machine, storing from the Web page, 
and storing from a computer can each be separately 
prohibited.
Disable Registering Destination from 
Operation Panel 
Disables address control from the machine.
To use this setting, select the desired items   and 
touch the [OK] key.
Group
 E-mail
 Internet Fax
Fax
(When the [Select/Cancel All] key is touched, all 
settings become  ....

107
Scan Settings
The following settings are related to scanning.
Touch the [Image Send Settings] key, touch the [Scan Settings] key, and configure the settings.
Default Sender Set
If a sender is not selected when a Scan to E-mail 
transmission is performed, the sender information stored 
in this setting is automatically used.
1Touch the [Sender Name] key and enter 
the sender name.
Up to 20 characters can be entered for the name. After 
you have entered the name, touch the [OK] key.
2Touch the...

108
Maximum Size of E-mail 
Attachments (E-mail)
To prevent the transmission of excessively large image 
files in scan mode, a file size limit can be set from 1 MB 
to 10 MB in increments of 1 MB.
If the size of the image file created by scanning the 
original exceeds the limit, the image file is discarded.
To set a limit, make sure that the [Unlimited] key is not 
selected  , specify the limit with the   keys, 
and touch the [OK] key. (To make the number change 
quickly, keep your finger on the   or...