Sharp MX 2600N User Manual

39
SELECTING A SPECIAL MODE
The procedure for selecting settings for Adding margins (Margin Shift) is explained below as an example. 
Although the specific settings for each special mode vary, the general procedure is the same.
1Place the originals.
When using the document glass, place the original with the 
side to be scanned face down.
2Select settings in the touch panel.
(1) Touch the [Special Modes] key.
(2) Touch the [Margin Shift] key.
Shifting the left margin by 15 mm will be explained as 
an...

40
CONVENIENT COPY FUNCTIONS
Adding margins (Margin Shift)
Erasing peripheral shadows (Erase)
Copying each facing page of a bound document 
(Dual Page Copy)
Making copies in pamphlet format (Pamphlet Copy)
Use this function to shift the image on 
the copy to create binding margins.
This function is convenient when you 
will be binding the copies with a string 
or placing them in a binder.
Use this function to erase peripheral 
shadows that occur when making 
copies of books and other thick 
originals....

41
Copying a large number of originals at once (Job Build)
Using two machines to make a large number of 
copies (Tandem Copy)
Using a different paper type for covers (Covers/Inserts)
Adding inserts when copying on transparency film
(Transparency Inserts)
A stack of originals higher than the 
indicator line on the automatic 
document feeder cannot be fed through 
the feeder.
The job build function lets you divide 
the stack of originals into sets, feed 
each set, and copy the sets as a single 
job.
You...

42
Copying multiple pages onto one sheet of paper 
(Multi Shot)
Copying a pamphlet (Book Copy)
Copying captions onto tab paper (Tab Copy)
Copying both sides of a card onto one sheet of 
paper (Card Shot)
Use this function to copy two or four 
original pages onto one sheet of paper.
Use this function to copy a book, 
pamphlet, or other bound original. The 
copies will be arranged in the same 
pamphlet-style layout.
When a saddle stitch finisher is 
installed, the output is automatically 
folded at the...

43
Printing the date or a stamp on copies (Stamp)
Repeating photos on a copy (Photo Repeat)
Creating a large poster (Multi-Page Enlargement)
Inverting the image (Mirror Image)
Use this function to print the date, a 
stamp, the page number, or text on 
copies.
A colour can be selected to print a 
stamp or text in colour.
Use this function to print up to 24 
copies of one photo on one sheet of 
paper.
Use this function to enlarge a copy 
image and print it using multiple sheets 
of paper. The sheets of...

44
Copying an A3 size original without cutting off the 
edges (A3 Full Bleed)
Copying in the centre of the paper (Centring)
Reversing white and black in a copy (B/W Reverse)
Adjusting red/green/blue in copies (RGB Adjust)
Adjusting the sharpness of an image (Sharpness)
Use this feature to make a full-size copy 
of an A3 original on A3W paper so that 
the edges are not cut off.
The original must be placed on the 
document glass.
Use this function to position the copy 
image at the centre of the paper....

45
Whitening faint colours in copies (Suppress 
Background)
Adjusting the colour (Colour Balance)
Adjusting the brightness of a copy (Brightness)
Adjusting the intensity of a copy (Intensity)
Checking copies before printing (Proof Copy)
Checking the number of scanned original sheets 
before copying (Original Count)
Use this function to suppress light background areas of a copy image.
When making a copy of an original that has a light coloured background, this can be used to whiten the 
background.
An...

46
Copying originals that are different sizes (Mixed Size 
Original)
Copying thin originals (Slow Scan Mode)
For example, even when a B5 original 
is mixed in with A4 originals, this 
function lets you copy all originals at 
once.
When used in combination with the 
auto image function, the copies can all 
be printed on the same size of paper.
This function lets you scan thin 
originals, which are normally difficult to 
handle, in the automatic document 
feeder.
A4
B5
A4
B5
mx3100_eu_qck.book  46 ページ...

PrintingPrinting
47
This section explains the basic procedure for printing using the printer 
driver of the machine. The settings that can be selected in the printer driver 
are also introduced.
The explanations of screens and procedures are primarily for Windows 
Vista
® in Windows® environments, and Mac OS X v10.4 in Macintosh 
environments. The window varies depending on the operating system 
version, the printer driver version, and the application.
XPRINTING . . . . . . . . . . . . . . . . . . . . ....

48
PRINTING
This section explains the basic procedures for printing.
The following example explains how to print a A4 size document from WordPad, which is a standard accessory 
program in Windows.
To install the printer driver and configure settings in a Windows environment, see 2. SETUP IN A WINDOWS 
ENVIRONMENT in the Software Setup Guide.
For information on the available printer drivers and the requirements for their use, see PRINTER FUNCTION OF 
THE MACHINE in 3. PRINTER in the Operation Guide....