Sharp MX 2600N User Manual

19
Loading paper in a tray
To change the paper in a tray, load the desired paper in the tray and then change the tray settings in the machine 
to specify the loaded paper. The procedure for changing the tray paper size is explained below. As an example, 
the paper in tray 1 is changed from B4 (8-1/2 x 14) size plain paper to A4 (8-1/2 x 11) size recycled paper.
Tray 3 and tray 4 can automatically detect the size of th e loaded paper. In this case, the tray settings change 
automatically.
Do not load as...

20
Changing the tray settings
When you change the paper in a tray, the tray settings in the system settings must also be changed.
1Press the [SYSTEM SETTINGS] key.
2Configure the tray settings in the touch panel.
(1) Touch the [Paper Tray Settings] key.
(2) Touch the [Tray Settings] key.
(3) Touch the [Change] key in Tray 1.
(4) Select [Recycled] from the Type select box.
(5) Select [A4] from the Size select box.
For more information, see Paper Tray Settings in 
7. SYSTEM SETTINGS in the Operation...

21
Loading paper in other trays
Bypass tray
Place paper that is A5 (7-1/4 x 10-1/2) or smaller 
in the horizontal orientation.Only the address side of envelopes can be printed on. 
Place envelopes with the address side face down.
Special types of paper that cannot be loaded in other trays can be loaded in the bypass tray.
For detailed information on the bypass tray, see LOADING PAPER IN THE BYPASS TRAY in 1.  BEFORE 
USING THE MACHINE in the Operation Guide.
When loading A3W, A3, or B4 size paper, pull...

22
Large capacity tray
The paper size of tray 5 can only be changed by a service technician.
Gently pull out the paper tray.
Insert the paper with the print side face 
down.
Fan the paper well before inserting it. 
Otherwise, multiple sheets may feed at 
once and cause a misfeed.
Insert the paper and then gently push the 
tray into the machine.
                  Indicator line
The indicator line indicates the maximum 
height of the paper that can be loaded in 
the tray. When loading paper, make sure...

CopyingCopying
23
This section explains the basic procedures for using the copier function. 
This section also introduces the various types of copying that can be 
performed using the special modes.
XBASE SCREEN OF COPY MODE . . . . . . . . . . . . . . . . . 24
XMAKING COPIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
X2-SIDED COPYING (Automatic Document Feeder)  . . 26
XCOPYING ON SPECIAL PAPER (Bypass Copy) . . . . . 27
XMAKING COLOUR COPIES (Colour Mode) . . . . . . . . . 29...

24
BASE SCREEN OF COPY MODE
Touch the [COPY] key in the touch panel to open the base screen of copy mode.
Select copy settings in the base screen.
(1) [Colour Mode] key
Touch this key to change the colour mode.
(2) Output display
When one or more output functions such as sort, 
group, staple sort, or saddle stitch have been 
selected, this shows the icons of the selected 
functions.
(3) [Exposure] key
This shows the current copy exposure and exposure 
mode settings. Touch this key to change the 
exposure...

25
MAKING COPIES
This is the most basic procedure for making copies.
1Touch the [COPY] key.
The base screen of copy mode appears.
2Place the originals.
When using the document glass, place the original with the 
side to be scanned face down.
3Set the number of copies and then press the 
[COLOUR START] key or the [BLACK & WHITE 
START] key.
1-sided original1-sided copy
Colour ModeSpecial Modes
Plain2-Sided Copy
Output
File
Quick File
Copy Ratio100%
A41.A4R2.B43.A34.
OriginalPaper SelectAuto
A4
PlainAuto...

26
2-SIDED COPYING 
(Automatic Document Feeder)
You can use the automatic document feeder to make automatic 
2-sided copies without the bother of manually turning the originals over 
and re-inserting them.
This section explains how to copy 1-sided originals onto both sides of 
the paper.
1Place the originals.
2Select settings in the touch panel.
(1) Touch the [2-Sided Copy] key.
(2) Touch the [1-Sided to 2-Sided] key.
(3) Touch the [OK] key.
3Set the number of copies and then press the 
[COLOUR START]...

27
COPYING ON SPECIAL PAPER 
(Bypass Copy)
Use the bypass tray to copy on special media such as heavy paper, 
envelopes, and tab paper.
This section explains how to load A4 heavy paper in the bypass tray.
1Place the originals.
When using the document glass, place the original with the 
side to be scanned face down.
2Insert paper in the bypass tray.
3Select settings in the touch panel.
(1) Touch the [Paper Select] key.
(2) Touch the paper type key of the bypass tray.
Here the [Plain] key has been...

28
Selecting a tray
Select settings in the touch panel. (Continued)
(4) Touch the [Auto-AB] key.
(5) Touch the [OK] key.
(6) Touch the bypass tray key.
(7) Touch the [OK] key.
4Set the number of copies and then press the 
[COLOUR START] key or the [BLACK & WHITE 
START] key.
To select paper, touch the [Paper Select] key or the image of the 
machine in the base screen of copy mode.
Touch a key to select a tray.
(A) Touch to select one of trays 1 to 4.
(B) Touch to select the bypass tray.
(C) Touch to set...