Sanyo Projector Plv 60 User Manual

INPUT 1
RGB SERIAL PORT R/C JACK R
-AUDIO-L(MONO)
R
-AUDIO-L(MONO) S-VIDEO
V H/V R BINPUT 2
G
VIDEO/Y
INPUT 3 C/Pb (Cb) Pr (Cr)
VIDEO/Y Pb (Cb) Pr (Cr)
R
-AUDIO-L
(MONO)R-AUDIO-L RESET EXT.SP(8Ω)AUDIO OUT
11
CONNECTING PROJECTOR
TERMINALS OF PROJECTOR
Connect S-VIDEO output
from video equipment to
this jack.  (Refer to P12.)
Connect audio output from
computer or video equipment to
these jacks.  (Refer to P12, 13.)
AUDIO INPUT JACKS
VIDEO INPUT JACKS
S-VIDEO INPUT JACK
Connect video output to these...

12
CONNECTING PROJECTOR
CONNECTING TO VIDEO EQUIPMENT
R-AUDIO-L(MONO) S-VIDEO
V H/V R BINPUT 2
G
VIDEO/Y
INPUT 3 C/Pb (Cb) Pr (Cr)
VIDEO/Y Pb (Cb) Pr (Cr)
R
-AUDIO-L
(MONO)R-AUDIO-L
INPUT 1
RGB SERIAL PORT R/C JACK R-AUDIO-L(MONO)
RESETEXT.SP(8Ω)AUDIO OUT
Video Source (example)
Video Cassette Recorder Video Disc Player
Video Cable
(RCA x 3) ✽S-VIDEO 
Cable
Audio Amplifier
Audio Speaker
(stereo)
Audio Cable ✽(RCA x 2) S-VIDEO
Output
Audio Amplifier
Cables used for connection(✽= Cables are not supplied...

13
CONNECTING PROJECTOR
INPUT 1
RGBR-AUDIO-L(MONO)
R
-AUDIO-L(MONO) V H/V R BINPUT 2
G
VIDEO/Y
C/Pb (Cb) Pr (Cr)
R
-AUDIO-L EXT.SP(8Ω)AUDIO OUT
SERIAL PORT R/C JACK
S-VIDEO
INPUT 3
VIDEO/Y Pb (Cb) Pr (Cr)
R
-AUDIO-L
(MONO)RESET
CONNECTING TO COMPUTER
IBM-compatible computers or Macintosh computers (VGA / SVGA / XGA / SXGA)
VGA Cable 
Desktop type Laptop type
Audio Output
MAC Adapter ✽
Set the slide
switches accord-
ing to the chart
on page 43.
Cables used for connection(✽= Cables are not supplied with...

14
LAMP
REPLACEWARNING
TEMP.LAMP
READY
ON-OFF
BEFORE OPERATION
TOP CONTROLS AND INDICATORS
READY INDICATORWARNING TEMP. INDICATORLAMP INDICATORLAMP REPLACE INDICATOR
This indicator lights green
when projector is ready to
be turned on.  And it
flashes green in Power
Management mode.  (P37)This indicator is dim when
projector is turned on.  And
bright when projector is in
stand-by mode.This indicator turns to
yellow when the life of
Projection Lamp draws to
an end.  (P39)This indicator flashes red
when...

INPUT MENU
SELECT
NORMAL
AUTO PC ADJ.
LENS SHIFT VOLUME FOCUS ZOOMON-OFF
Used to adjust zoom.  (P21)
Used to select MENU
operation. (P18, 19)
MENU BUTTONINPUT BUTTONPOWER ON–OFF BUTTONFOCUS BUTTONS
VOLUME BUTTONS
Used to select input source
among INPUT 1, 2 or 3.
(P23, 31)
Used to operate Auto PC
Adjustment function.  (P24)
Used to adjust focus.  (P21)
Used to adjust volume.
(P22)
Used to reset to normal
picture adjustments preset
by the factory or to reset
screen adjustment in True
mode, Digital Zoom...

MUTE INPUT ON-OFF
VOLUME ZOOM FOCUS
AUTO PC ADJ.D.ZOOM FREEZE
IMAGENO SHOW
LENS SHIFT KEYSTONE
SELECT
NORMAL
MENU
16
16.4’ (5 m)
60°
16.4’ (5 m)
BEFORE OPERATION
OPERATION OF REMOTE CONTROL
Used to select input source.
(P23, 31)
Used to execute the item
selected or to expand image in
Digital Zoom mode. (P30)
POWER ON-OFF BUTTON
Used to turn projector on or off.
(P20)
MENU BUTTON
Used to select MENU operation.
(P18, 19)
SELECT BUTTON
INPUT BUTTON
Used to move Pointer or to
adjust the item on On-Screen...

17
BEFORE OPERATION
OPENOPEN
123
Slide the lid
upward.Press the lid
downward
and slide it.
Remove the battery
compartment lid.Slide 2 batteries into
the compartment.Replace the compartment
lid.
REMOTE CONTROL BATTERIES INSTALLATION
Two AA size batteries
For correct polarity (+ and –), be sure
the battery terminals are in contact
with pins in the compartment.
WIRED REMOTE CONTROL OPERATION
When using this Remote Control Unit as Wired Remote Control, Connect Remote Control Unit to R/C JACK with
Remote...

18
LENS SHIFT KEYSTONE
SELECT
NORMAL
MENU
BEFORE OPERATION
HOW TO OPERATE ON-SCREEN MENU
FLOW OF ON-SCREEN MENU OPERATION
Display ON-SCREEN MENU
Press MENU button to display ON-SCREEN MENU
(MENU BAR).  A red frame is POINTER.
Move POINTER (red frame) to MENU ICON that you
want to select by pressing POINT RIGHT / LEFT
buttons.
Adjust ITEM DATA by pressing POINT buttons.
Refer to the following pages for details of respective
adjustments.
Press POINT DOWN button and move POINTER (red
frame or red arrow) to...

19
BEFORE OPERATION
MENU BAR
SYSTEM MENU
Used to select
computer system.
(Refer to P23, 24)
IMAGE ADJUST MENU
Used to adjust
computer image. 
[Contrast / Brightness /
White Balance (R/G/B)
/ Gamma]
(Refer to P29)
SETTING MENU
Used to change settings
of projector and reset
Lamp Replace Counter. 
(Refer to P36, 37)
INPUT MENU
Used to select
input source
among INPUT 1,
2, or 3.
(Refer to P23)
SCREEN MENU
Used to adjust
size of image.
(Refer to P30)
IMAGE SELECT MENU
Used to select image
level among...

20
BASIC OPERATION
TURNING ON PROJECTOR
Connect the projectors AC Power Cord into an AC outlet and
turn MAIN ON / OFF SWITCH to ON.  LAMP Indicator lights
RED, and READY Indicator lights GREEN.
Press POWER ON-OFF button on Top Control or on Remote
Control Unit to ON.  LAMP Indicator dims, and Cooling Fans
start to operate.  Preparation Display appears on a screen and
the count-down starts.  The signal from the PC or Video source
appears after 30 seconds.
2
3
TURNING OFF THE PROJECTOR
Press POWER ON-OFF...