Sanyo Projector Plv 60 User Manual

31
VIDEO MODE
SELECTING INPUT SOURCE
MENU OPERATION
DIRECT OPERATION
Choose either Input 2 or Input 3 by pressing INPUT button on the Top
Control or on the Remote Control Unit.
If projector cannot reproduce proper video source, select correct input
source through MENU OPERATION (see below).
Press MENU button and ON-SCREEN MENU will appear.  Press
POINT LEFT/RIGHT button to move a red frame pointer to
INPUT Menu icon.
Press POINT DOWN button to move a red arrow pointer to
either Input 2 or Input 3 that...

32
AV SYSTEM MENU (VIDEO OR S-VIDEO)
AV SYSTEM MENU (COMPONENT VIDEO)
VIDEO MODE
SELECTING VIDEO SYSTEM
Press MENU button and ON-SCREEN MENU will appear.  Press
POINT LEFT/RIGHT buttons to move a red frame pointer to
SYSTEM Menu icon.
Press POINT DOWN button to move a red arrow pointer to the
system that you want to select and then press SELECT button.
1
2
If projector cannot reproduce proper video image, it is necessary to
select a specific broadcast signal format among PAL, SECAM, NTSC,
NTSC 4.43,...

33
VIDEO MODE
PICTURE IMAGE ADJUSTMENTS
IMAGE LEVEL SELECT (MENU)
Press MENU button and ON-SCREEN MENU will appear.  Press
POINT LEFT/RIGHT button to move a red frame pointer to
IMAGE SELECT Menu icon.1
2Press POINT DOWN button to move a red frame pointer to the
level that you want to set and then press SELECT button.
Move the red frame pointer to the
level and press SELECT button.
The level being selected.
IMAGE SELECT MENU
Normal picture level preset on this projector.
Standard
Picture level adjusted...

34
VIDEO MODE
Press POINT LEFT/RIGHT buttons
to adjust value.
Press MENU button and ON-SCREEN MENU will appear.  Press
POINT LEFT/RIGHT button(s) to move a red frame pointer to
IMAGE ADJUST Menu icon.1
2Press POINT DOWN button to move a red frame pointer to the
item that you want to adjust and then press SELECT button.
The level of each item is displayed.  Adjust each level by
pressing POINT LEFT/RIGHT button(s).
Move a red frame pointer to
the item to be selected and
then press SELECT button.
IMAGE...

35
VIDEO MODE
PICTURE SCREEN ADJUSTMENT
This projector has a picture screen resize function, which enables you to display the desirable image size.
Press MENU button and ON-SCREEN MENU will appear.  Press
POINT LEFT/RIGHT button(s) to move a red frame pointer to
SCREEN Menu icon.
Press POINT DOWN button and move a red frame pointer to the
function that you want to select and then press SELECT button.
1
2
Provides image to fit width of screen by expanding image width
uniformly.  This function can be used...

36
SETTING
Ceiling
When this function is “On,” picture is top / bottom and the left / right
reversed.  This function is used to project the image from a ceiling
mounted projector.
Rear
When this function is “On,” picture is left / right reversed.  This
function is used to project the image to a rear projection screen.
Ceiling function
Rear function
Keystone
When the image is distorted vertically, select Keystone.  ON-
SCREEN Menu disappears and the message “Keystone” is
displayed.  Correct the Keystone...

37
This function turns Projection Lamp off when projector detects signal
interruption and projector is not used for a certain period in order to
reduce power consumption and maintain the Lamp-life.  (This
projector is shipped with this function ON.)
Power Management function operates to turn Projection Lamp off
when the input signal is interrupted and projector is not operated
over 5 minutes.  This function operates as follows;
1. When the signal is interrupted, “No signal” and the counting
down display...

38
APPENDIX
MAINTENANCE
WARNING TEMP. INDICATOR
WARNING TEMP. Indicator flashes red when internal temperature of projector exceeds normal temperature.  The Indicator
stops flashing when temperature of projector returns to normal.  When WARNING TEMP. Indicator continues to flash, check
the items listed below.
Ventilation slots of projector may be blocked.  In such an event, reposition the appliance so that Ventilation slots are
not obstructed.
AIR FILTER CARE AND CLEANING
Air Filters may be clogged with...

39
APPENDIX
LAMP REPLACEMENT
When the life of the Lamp of this projector draws to an end, the LAMP REPLACEMENT Indicator lights yellow.  When the
image becomes dark or the color of the image becomes unnatural, replacement of the Lamp is required.
Turn off projector and disconnect AC plug.  Allow projector to
cool for at least 45 minutes.
Remove 2 screws and pull out Lamp Assembly by grasping
Handle.
1
3
LAMP REPLACE COUNTER
Replace Lamp Assembly with a new one and tighten 2 screws.
Make sure that Lamp...

40
APPENDIX
TROUBLESHOOTING
Before calling your dealer or service center for assistance, check the matters below once again.
1. Make sure you have connected projector to your equipment as described in the section CONNECTING THE
PROJECTOR  on pages 11 ~ 13.
2. Check cable connection.  Verify that all computer, video and power cords are properly connected.
3. Verify that all power is switched on.
4. If projector still does not produce an image, re-start the computer.
5. If the image sill does not appear,...