Sanyo Projector Plc Xu300 User Manual

1

How to Operate the On-Screen Menu
The	projector 	can 	be 	adjusted 	or 	set 	via 	the 	On-Screen	
Menu. 	The 	menus 	have 	a 	hierarchical 	structure, 	with	
a 	main 	menu 	that 	is 	divided 	into 	submenus, 	which 	are	
further 	divided 	into 	other 	submenus. 	For 	each 	adjustment	
and 	setting 	procedure, 	refer 	to 	respective 	sections 	in 	this	
manual.
Use	the	Point	
ed	buttons	 to	highlight	 or	select	 a	main	
menu 	item. 	Press 	the 	Point 	
8	or 	the SELECT 	button	
to 	access 	the...



Menu Bar
For	detailed	functions	of	each	menu,	see	“Menu	Tree”	on	pages	68-69.
q
w
e
r
t
y
u
i
Main	MenuSub-Menu
o
!0
e	Image select
	For	computer	source,	used	to	select	an	image	mode	from	among	Dynamic,	Standard ,	Real,	Blackboard(Green) ,	
Colorboard	and	image	1 - 4	(p.33).	
						For	Video	source,	used	to	select	an	image	mode	among	
Dynamic ,	Standard ,	Cinema,	Blackboard(Green) ,	Colorboard	
and	
Image 1- 4 	(p.40).
r	Image adjust
	 For	computer	source,	used	to	adjust	computer	image	[...

3

Rotate	the	Zoom	Ring	to	zoom	in	and	out.		
Rotate	the	Focus	Ring	to	adjust	the	focus	of	the	image.		
Zoom and Focus Adjustment
If	a 	projected 	picture 	still 	has 	keystone 	distortion 	after	
pressing	 the	AUTO	 SETUP 	button	 on	the	 top	control	 or	the	
AUTO	 SET	button	 on	the	 remote	 control,	 correct	the	image	
manually	as	follows:
Press	the	KEYSTONE	button	on	the	remote	control.	 The	
Keystone	dialog	box	appears.	Use	the	Point	
ed  	buttons	to	
correct	keystone	distortion.	 The	keystone...

4

Sound Adjustment
1

Press	the	MENU	 button	to	display	 the	On-Screen	 Menu.	
Use 	the 	Point 	
ed	buttons 	to 	select 	Sound .	 Press 	the	
SELECT 	button	to	access	the	submenu	items.	
Press	the	VOLUME+/–	 buttons	on	the	 top	control	 or	on	 the	
remote	 control	to	adjust	 the	volume.	 The	volume	 dialog	box	
appears	on	the	screen	for	a	few	seconds.
Press	 the	MUTE	 button	on	the	 remote	 control	to	select	On	
to 	temporarily 	turn 	off 	the 	sound. 	To 	turn 	the 	sound 	back	
on,	 press...

5

Remote Control Operation
Using	the	remote	control	for	some	frequently	used	operations	is	advisable.	Just	pressing	one	of	the	buttons	
enables	you	to	make	the	desired	operation	quickly	without	calling	up	the	On-Screen	Menu.
P r e s s	t h e 	C O M P U T E R 	1 / 2 , 	V I D E O , 	S - v i d e o 	a n d	
COMPONENT 	buttons 	on 	the 	remote 	control 	to 	select 	the	
input	source.	See	pages	27-28,37-38	for	details.
COMPUTER 1/, VIDEO, S-video and COMPONENT  
buttons
Press 	the 	FREEZE 	button 	on...

6

black	out	➜		normal	➜	black	out	➜		normal	➜•	•	•	•	•
Press	 the	NO	 SHOW	 button	on	the	 remote	 control	to	black	 out	
the 	image. 	To 	restore 	to 	normal, 	press 	the 	NO 	SHOW 	button	
again	 or	press	 any	other	 button.	 The	screen	 changes	 each	time	
you	press	the	NO	SHOW	button	as	follows.
NO SHOw button
Press	 the	P-TIMER	 button	on	the	 remote	 control.	 The	P-Timer	
display	
00:00 	appears	 on	the	 screen	 and	the	countdown	 starts	
(00:00–59:59).
To	stop	the	countdown,	press	the...

7

Choose	Computer  1(RGB)	or	Computer  1(RGB(Scart))  by	pressing	 the	INPUT 	button	 on	the	 top	control	 or	
press	the	COMPUTER	1	button	on	the	remote	control.	
Before 	using 	INPUT 	button, 	correct 	input 	source 	should 	be 	selected 	through 	Menu 	operation 	as 	described	
below.
1
Input Menu

3
Input Source Selection (Computer 1: RGB / Component / RGB(Scart) )
Computer Input 
COMPUTER 1 button
✔ Note:
	 	 When	the	Input	Search	function	is	set	to	On1 	or	On 	in	
the	 Auto	setup...

8

Choose	Computer  (RGB)	by	 pressing	 the	INPUT 	button	 on	the	 top	control	 or	press	 the	COMPUTER	 2	button	
on	the	remote	control.
Input Source Selection (Computer : RGB)
Direct Operation
Menu Operation
✔ Note:
	 	 When	 the	Input	 Search	 function	 is	set	 to	On1 	or	 On ,	
the	input	signal	will	be	searched	automatically	(p.45).
COMPUTER  button
Top ControlRemote Control
1

Press	the	MENU	button	to	display	the	On-Screen	
Menu.	Use	the	Point	
ed	buttons	to	select...

9

PC System Menu
PC System Menu
Computer System Selection
This	projector	automatically	tunes	to	various	types	of	computers	based	on	VGA,	SVGA,	XGA,	SXGA,	WXGA,	
or	UXGA	with	its	Multi-scan	system	and	 Auto	PC	Adjustment.	If	a	computer	is	selected	as	a	signal	source,	this	
projector	automatically	detects	the	signal	format	and	tunes	to	project	a	proper	image	without	any	additional	
settings.	(Signal	formats	provided	in	this	projector	are	shown	on	pages	71.)
One	of	the	following	messages	may	appear...

30

Auto	PC	Adjustment	function	is	provided	to	automatically	adjust	 Fine sync .,	Total dots,	Horizontal 	,	Vertical	,	
Clamp,	Display area H 	and	Display area V	positions	to	conform	to	your	computer.
PC Adjust Menu
Auto PC Adjustment
To store adjustment parameters
The	adjusted	 parameters	 from	the	Auto	 PC	Adjustment	 can	
be	 stored	 in	the	 projector.	 Once	the	parameters	 are	stored,	
the	 setting	 can	be	done	 just	by	selecting 	a	
Mode  (1–5) 	in	
the 	PC 	System 	Menu 	(see 	page 	29). 	See...