Sanyo Projector Plc Xu300 User Manual
Have a look at the manual Sanyo Projector Plc Xu300 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 550 Sanyo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
1 How to Operate the On-Screen Menu The projector can be adjusted or set via the On-Screen Menu. The menus have a hierarchical structure, with a main menu that is divided into submenus, which are further divided into other submenus. For each adjustment and setting procedure, refer to respective sections in this manual. Use the Point ed buttons to highlight or select a main menu item. Press the Point 8 or the SELECT button to access the submenu items. (The selected item is highlighted in ORANGE.) Use the Point ed buttons to select the desired submenu item and press the SELECT button to set or access the selected item. Press the MENU button on the top control or the remote control to display the On-Screen Menu. 1 3 On-Screen Menu Top Control MENU button POINT buttons (arrowhead) Remote Control SELECT button MENU button SELECT button POINT buttons (arrowhead) Point 8 or SELECT button Use the Point ed7 8 buttons to adjust the setting or switch between each option and press the SELECT button to activate it and return to the submenu.4 Press the Point 7 button to return to the main menu. Press the MENU button to exit the On-Screen Menu.5 The currently set item is check marked. The selected item is highlighted in ORANGE. Basic Operation
Menu Bar For detailed functions of each menu, see “Menu Tree” on pages 68-69. q w e r t y u i Main MenuSub-Menu o !0 e Image select For computer source, used to select an image mode from among Dynamic, Standard , Real, Blackboard(Green) , Colorboard and image 1 - 4 (p.33). For Video source, used to select an image mode among Dynamic , Standard , Cinema, Blackboard(Green) , Colorboard and Image 1- 4 (p.40). r Image adjust For computer source, used to adjust computer image [ Contrast , Brightness , Color temp . , white balance (R/G/B), Sharpness and Gamma] (pp.34-35). For Video source, used to adjust picture image [ Contrast , Brightness , Color, Tint, Color temp . , white balance (R/G/ B) , Sharpness , Gamma, Noise reduction and Progressive] (pp.41-42). w PC adjust Select Fine sync . , Total dots, Horizontal , Vertical, Clamp, Display area H , Display area V and Auto PC adj . to adjust the parameters to match with the PC input signal format (p.30-32). t Screen For computer source, used to adjust size of the image [ Normal , True, w ide , Full , Custom and Digital zoom +/– ] (pp.35-36). For Video source, used to set size of image [Normal, w ide , Custom ] (p.43). q Input Used to select an input source from Computer 1 , Computer ,Video or S-video . (pp.27-28,37-38). y Sound Used to adjust the volume or mute the sound (p.24). i Information Display the input source information: Input , H-sync freq . , V-sync freq . , Screen, Language , Lamp status , Lamp counter , Power management , Keylock, PIN code lock and Remote control (p.58). !0 Guide The key operation is displayed. u Setting Used to set the projector’s operating configurations (pp.44-57). o Network See owner’s manual of “Network Set-up and Operation”. Basic Operation
3 Rotate the Zoom Ring to zoom in and out. Rotate the Focus Ring to adjust the focus of the image. Zoom and Focus Adjustment If a projected picture still has keystone distortion after pressing the AUTO SETUP button on the top control or the AUTO SET button on the remote control, correct the image manually as follows: Press the KEYSTONE button on the remote control. The Keystone dialog box appears. Use the Point ed buttons to correct keystone distortion. The keystone adjustment can be stored (see page 46). Reduce the upper width with the Point e button. Reduce the lower width with the Point d button. • The white arrows indicate that there is no correction. • A red arrow indicates the direction of correction. • An arrow disappears at the maximum correction. • If you press the KEYSTONE button on the remote control once more while the keystone dialog box is being displayed, the keystone adjustment will be canceled. • The adjustable range is limited depending on the input signal. Keystone Correction Remote Control Auto setup function is provided to automatically execute the setting of Auto setup (includes Input search, Auto PC adj. and Auto Keystone functions) in the setting menu by just pressing the AUTO SETUP button on the top control or the AUTO SET button on the remote control. Refer to page 45 for the setting of the Auto setup function. ✔ Notes: • Auto Keystone corrects vertical distortion only; it does not correct horizontal distortion. • Auto Keystone cannot work when Ceiling feature is set to On in the Setting menu (p.50). • Perfect correction of the image distortion cannot be ensured with the Auto setup function. If the distortion cannot be corrected properly by pressing the AUTO S E T U P o r A U TO S E T b u t t o n , a d j u s t m a n u a l l y b y pressing the KEYSTONE button on the remote control or selecting Keystone in the Setting menu (p.46). • F i n e s y n c . , To t a l d o t s , H o r i z o n t a l a n d Ve r t i c a l position of some computers cannot be fully adjusted with the Auto PC Adjustment function. When the image is not provided properly with this operation, manual adjustments are required (pp.31-32). AUTO SET button Auto Setup Function POINT ed buttons KEySTONE button Zoom Ring Focus Ring Top Control AUTO SETUP button POINT ed buttons Basic Operation
4 Sound Adjustment 1 Press the MENU button to display the On-Screen Menu. Use the Point ed buttons to select Sound . Press the SELECT button to access the submenu items. Press the VOLUME+/– buttons on the top control or on the remote control to adjust the volume. The volume dialog box appears on the screen for a few seconds. Press the MUTE button on the remote control to select On to temporarily turn off the sound. To turn the sound back on, press the MUTE button again to select Off or press the VOLUME +/– buttons. The Mute function is also effective for the AUDIO OUT jack. Press the SELECT button to switch the mute function On/ Off. When the sound is turned off, On is displayed. Press the VOLUME +/– buttons again to turn the sound back on. Use the Point ed buttons to select the desired submenu item and press the SELECT button to access the selected item. Volume Volume Mute Press the Point e button to turn up the volume; press the Point d button to turn down the volume. Mute Direct Operation Menu Operation Sound Menu Volume Dialog Box Remote Control VOL+ button VOL- button MUTE button Top Control V O L U M E + / - buttons Approximate level of the volume. Press the MUTE button to set the Mute function On or Off . The dialog box disappears after 4 seconds. Basic Operation
5 Remote Control Operation Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu. P r e s s t h e C O M P U T E R 1 / 2 , V I D E O , S - v i d e o a n d COMPONENT buttons on the remote control to select the input source. See pages 27-28,37-38 for details. COMPUTER 1/, VIDEO, S-video and COMPONENT buttons Press the FREEZE button on the remote control to freeze the picture on the screen. To cancel the Freeze function, press the FREEZE button again or press any other button. FREEZE button Display the input source information: Input , H-sync freq . , V-sync freq . , Screen, Language , Lamp status , Lamp counter, Power management , Keylock, PIN code lock and Remote control (p.58). INFO . button Press the D.ZOOM buttons on the remote control to enter to the Digital zoom +/– mode. See page 36 for details. D .ZOOM buttons Remote Control F R E E Z E button D .ZOOM buttons LAMP button ✔ Note: See the next page for the description of other buttons.LAMP button COMPUTER 1/buttons VIDEO button Normal ....... Normal brightness Eco ............ Lower brightness reduces the lamp power consumption and extends the lamp life. Press the LAMP button on the remote control to select the lamp mode for changing the brightness on the screen. INFO . button POINT ed buttons S-video button COMPONENTbutton Basic Operation
6 black out ➜ normal ➜ black out ➜ normal ➜• • • • • Press the NO SHOW button on the remote control to black out the image. To restore to normal, press the NO SHOW button again or press any other button. The screen changes each time you press the NO SHOW button as follows. NO SHOw button Press the P-TIMER button on the remote control. The P-Timer display 00:00 appears on the screen and the countdown starts (00:00–59:59). To stop the countdown, press the P-TIMER button. To cancel the P-Timer function, press the P-TIMER button again. P-TIMER button Press the IMAGE button on the remote control to select a desired image mode of the screen. See pages 33, 40 for details. IMAGE button No show disappears after 4 seconds. P-Timer display ✔ Note: See the previous page for the description of other buttons. IMAGE button NO SHOw button P-TIMER button SCREEN button Select the screen size (See pages 35-36, 43 for details). SCREEN button Basic Operation
7 Choose Computer 1(RGB) or Computer 1(RGB(Scart)) by pressing the INPUT button on the top control or press the COMPUTER 1 button on the remote control. Before using INPUT button, correct input source should be selected through Menu operation as described below. 1 Input Menu 3 Input Source Selection (Computer 1: RGB / Component / RGB(Scart) ) Computer Input COMPUTER 1 button ✔ Note: When the Input Search function is set to On1 or On in the Auto setup function, the input signal will be searched automatically (p.45). Computer 1 Top ControlRemote Control Direct Operation Menu Operation Press the MENU button to display the On-Screen Menu. Use the Point ed buttons to select Input and then press the Point 8 or the SELECT button. Use the Point ed buttons to select Computer 1 . When Computer 1 is selected, press the Point 8 to access the submenu items . Use the Point ed buttons to select the RGB input source and then press the SELECT button. Computer 1(RGB) Computer 1 (RGB(Scart)) Video Computer (RGB) S-video INPUT button Computer 1(RGB) / (Component) / (RGB(Scart))
8 Choose Computer (RGB) by pressing the INPUT button on the top control or press the COMPUTER 2 button on the remote control. Input Source Selection (Computer : RGB) Direct Operation Menu Operation ✔ Note: When the Input Search function is set to On1 or On , the input signal will be searched automatically (p.45). COMPUTER button Top ControlRemote Control 1 Press the MENU button to display the On-Screen Menu. Use the Point ed buttons to select Input and then press the Point 8 or the SELECT button. Use the Point ed buttons to select Computer and then press the SELECT button. Input Menu Computer (RGB) 3When Computer is selected, analog RGB input source will be selected directly. INPUT button Computer Input Video Computer (RGB) S-video Computer 1(RGB) / (Component) / (RGB(Scart))
9 PC System Menu PC System Menu Computer System Selection This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, WXGA, or UXGA with its Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional settings. (Signal formats provided in this projector are shown on pages 71.) One of the following messages may appear when: The projector cannot recognize the connected signal conforming to the provided PC Systems. Auto is displayed on the System Menu box and the Auto PC Adjustment function works to display proper images. If the image is not projected properly, a manual adjustment is required (pp.31-32). There is no signal input from the computer. Check the connection between your computer and the projector. (See “Troubleshooting” on page 64.) Auto ----- The preset system is manually adjusted in the PC Adjust Menu. The adjusted data can be stored in Mode 1–5 (pp.31-32). Mode 1 PC Systems provided in this projector is chosen. The projector chooses a proper system provided in the projector and displays it. SVGA 1 *Mode 1 and SVGA 1 are examples. 1 PC system can also be selected manually. Selecting Computer System Manually Press the MENU button to display the On-Screen Menu. Use the Point ed buttons to select Input and then press the Point 8 or the SELECT button. Use the Point ed buttons to select Systerm and then press the Point 8 or the SELECT button. Use the Point ed buttons to select the desired system and then press the SELECT button.3 The PC System Menu Selected system is displayed. Systems in this dialog box can be selected.Customized Mode (1–5) set in the PC Adjust Menu (pp.31-32). Computer Input
30 Auto PC Adjustment function is provided to automatically adjust Fine sync ., Total dots, Horizontal , Vertical , Clamp, Display area H and Display area V positions to conform to your computer. PC Adjust Menu Auto PC Adjustment To store adjustment parameters The adjusted parameters from the Auto PC Adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just by selecting a Mode (1–5) in the PC System Menu (see page 29). See also “Store” on page 32. ✔ Note: • F i n e s y n c ., To t a l d o t s , H o r i z o n t a l a n d Ve r t i c a l position of some computers cannot be fully adjusted with the Auto PC Adjustment function. When the image is not provided properly with this operation, manual adjustments are required (pp.31-32). • The Auto PC Adjustment cannot be operated when 480i, 575i , 480p , 575p , 7 0p,1035i , or 1080i is selected in the PC System Menu (p.29). Press the MENU button to display the On-Screen Menu. Use the Point ed buttons to select PC Adjust and then press the Point 8 button. 1 Use the Point ed buttons to select Auto PC Adj . and then press the SELECT button. Auto PC Adj . Menu Operation Use Point ed buttons to select Auto PC Adj . and press the SELECT button. Please wait . . . appears while the Auto PC adjustment is in process. Computer Input