Sanyo Projector Plc Xu300 User Manual

41

Image Adjustment
1

Press	the	Point	7	button	to	decrease	the	contrast;	press	the	
Point	
8	button	to	increase	the	contrast	(from	0	to	63).
Press	 the	Point	7	button	 to	decrease	 the	brightness;	 press		
the	Point	
8	button	to	increase	the	brightness	(from	0	to	63).
Contrast
Brightness
Press	the	Point	7	button	to	lighten	red	tone;	press	the	Point	
8	button	to	deepen	red	tone	(from	0	to	63).
white balance (Red)
Press
	the 	Point 	7	button 	to 	lighten 	green 	tone; 	press 	the	
Point	
8	button...

4

Use	the 	Point 	7  8	buttons 	to 	adjust 	the 	gamma 	value 	to	
obtain	a	better	balance	of	contrast	(from	0	to	15).
Gamma
Press	 the	Point	7	button	 to	decrease	 the	sharpness	 of	the	
image;	 press	the	Point	
8	button	 to	increase	 the	sharpness	
of	the	image	(from	0	to	15).
Sharpness
An	 interlaced	 video	signal	 can	be	displayed	 in	progressive	
mode.	Select	one	of	the	following	options.
	 Off 	..........	Disabled.
	 L1 	.......... 	For	an	active	picture.
	 L2	.......... 	For	a	still...

43

This	projector	has	the	picture	screen	resize	function,	which	enables	you	to	customize	the	image	size.
Normal
Screen Size Adjustment
Screen Menu1

Provide	the	image	at	the	4:3	normal	video	aspect	ratio.
Custom
Adjust 	the 	screen 	scale 	and 	position 	manually 	with 	this	
function.
Press 	the 	Point 	
8	button 	at 	Custom 	and 	the 	Custom 	is	
displayed	 on	the	 screen,	 you	can	use	the	Point	
ed buttons	
to	choose	the	item	you	want	to	adjust.
	Scale H/V 	.......... 	Adjust 	the...

44

Language
The	language	 used	in	the	 On-Screen	 Menu	is	available	 in	
English,	German ,	French,	Italian,	Spanish ,	Portuguese ,	
Dutch,	Swedish ,	Finnish,	Polish,	Hungarian ,	Romanian,	
Russian,	Chinese,	Korean,	japanese ,	and	Thai.
Setting Menu
Setting
Setting
Press	the 	MENU 	button 	to 	display 	the 	On-Screen	
Menu.	 Press	the	Point	
ed	buttons	 to	select	 the	Setting	
and	 press	 the	Point	
8	or	 SELECT 	button	 to	access	 the	
submenu	items.
1
Use 	the 	Point 	ed	buttons 	to 	select 	the...

45

✔ Note:
	 •	Auto  Keystone	corrects 	vertical 	distortion 	only,	
not	correct	horizontal	distortion.
	 •	The 	
Auto  Keystone 	function 	cannot 	work 	when	
the	
Ceiling 	feature	 is	set	On 	in	 the	 Setting	 menu	
(p.50).
	 •	Perfect 	correction 	of 	the 	image 	distortion 	cannot	
be 	ensured 	with 	the 	Auto 	setup 	function. 	If 	the	
distortion 	is 	not 	corrected 	properly 	by 	pressing	
the 	AUTO 	SETUP 	or 	AUTO 	SET 	button, 	adjust	
manually 	by 	pressing 	the 	KEYSTONE 	button 	on	
the...

46

Keystone
T h i s	f u n c t i o n 	i s 	u s e d 	t o 	s t o r e 	o r 	r e s e t 	t h e 	k e y s t o n e	
correction	 when	the	AC	 power	 cord	is	unplugged.	 Use	the	
Point	
ed	buttons	to	switch	between	each	option.
	Store 	....... 	Keep 	the 	keystone 	correction 	even 	when 	the	
AC	power	cord	is	unplugged.
	Reset 	....... 	Release	 the	keystone	 correction	 when	the	AC	
power	cord	is	unplugged.
To 	correct 	keystone 	distortion, 	press 	the 	SELECT 	button.	
Keystone 	appears	 on	the	 screen.	 Use...

47

Logo (Logo and Logo PIN code lock settings)
Logo selectThis	function	 allows	you	to	customize	 the	screen	 logo	with	
Logo select ,	Capture,	Logo PIN code lock 	and	Logo PIN 
code change 	functions.
✔ Note:
	 		When	
On 	is	 selected	 in	the	 Logo	 PIN	code	 lock	function,	
Logo select 	and	Capture	functions	cannot	be	selected.
Logo select
This	function 	decides 	on 	the 	starting-up 	display 	from	
among	following	options.	
	User 	........ 	Show	the	image	you	captured.
	Default 	.... 	Show	the...

48

Capture
Capture
This	function 	enables 	you 	to 	capture 	an 	image 	being	
projected 	to 	use 	it 	for 	a 	starting-up 	display 	or 	interval 	of	
presentations.
Select	
Capture 	and	press	the	SELECT 	button.		
A 	confirmation	box	appears	and	select	 yes 	to	capture	the	
projected	image.
After 	capturing 	the 	projected 	image, 	go 	to 	the 	Logo 	select	
function	 and	set	it	to	
User .	Then	 the	captured	 image	will	be	
displayed	the	next	time	you	turn	on	the	projector.
To	cancel	the	capture...

49

Enter a Logo PIN code
Use	the	Point	ed buttons	 to	enter	 a	number.	 Press	the	
Point	
8	 button	 to	fix	 the	 number	 and	move	 the	red	 frame	
pointer 	to 	the 	next 	box. 	The 	number 	changes 	to 	“
✳ ”.	If	
you	 fixed	 an	incorrect	 number,	use	the	Point	
7	button	 to	
move	 the	pointer	 to	the	 number	 you	want	 to	correct,	 and	
then	enter	the	correct	number.
Repeat	this	step	to	complete	entering	a	four-digit	
number.
After	 entering	 the	four-digit	 number,	move	the	pointer	 to	
Set.	Press...

50

Ceiling 
Rear 
Ceiling
When	this 	function 	is 	set 	to 	On ,	 the 	picture 	will 	be 	top/
bottom 	and 	left/right 	reversed. 	This 	function 	is 	used 	to	
project	the	image	from	a	ceiling-mounted	projector.
Rear
When	 this	function	 is	set	 to	On,	the	 picture	 will	be	left/right	
reversed. 	This 	function 	is 	used 	to 	project 	the 	image 	from	
rear	of	the	screen.
Terminal
Terminal
The	 COMPUTER	 IN	2/MONITOR	 OUT	terminal	 on	the	 back	
of	 the	 projector	 is	switchable	 for	computer	 input...