Sanyo Projector Plc Xd2200 User Manual

51

Setting
Standby mode
This	function	is	available	when	operating	the	projector	via	
network.
	Network	....	Supply	 the	power	 to	the	 network	 function	 even	
after	turning	 off	the	 projector	 by	pressing	 the	
ON/STAND-BY 	button	 on	the	 remote	 control.	
You	can	turn	 on/off	 the	projector	 via	network,	
modify 	network 	environment, 	and 	receive	
an 	e-mail 	about 	projector 	status 	while 	the	
projector	is	powered	off.
	Eco	............	Select	Eco	 when	 you	do	not	 use	 the	projector	
via...

52

Setting
Closed CaptionClosed Caption
Closed	Caption	is	a	printed	version	of	the	program	sound	or	
other	information	displayed	on	the	screen.	If	the	input	signal	
contains	closed	captions,	you	can	turn	on	the	feature	and	
switch	the	channels.	Press	the	Point	▲▼	buttons	to	select	
Off,	CC1,	CC2,	CC	or	CC4.		
If	 the 	closed 	caption 	is 	not 	clear, 	you 	can 	change 	the 	text	
from	Color	to	white.
Press	the	Point	▲▼	buttons	to	select	Off,	CC1,	CC2,	CC	or	CC4,	and	then	press	the	SELECT...

5

Setting
Remote control
This	function	allows	you	to	change	brightness	of	the	
screen.
Lamp control Lamp control
✔Note:
•	Lamp	mode	cannot	be	changed	for	a	while	after	turning	
		on	the	projector.	Lamp	needs	some	time	to	stabilize	
		after	the	power	is	turned	on.	Stored	lamp	mode	will	be	
		active	after	the	lamp	is	stabilized.
This	projector	provides	two	different	remote	control	codes:	
the	factory-set	initial	code	(Code 1)	and	the	secondary	code	
(Code 2).	This	switching	function	prevents	remote...

54

Setting
Key lock
Key lockSecurity (Key lock and PIN code lock)
PIN code lock
This	function	locks	the	top	control	and	remote	control	
buttons	to	prevent	operation	by	unauthorized	persons.
Select	Key lock	and	then	press	the	SELECT	button,	
and	select	the	desired	item	by	pressing	the	Point	▲▼	
buttons.
	.....	Unlocked.
	.....	Lock	the	operation	of	the	top	control.	 To	
unlock,	use	the	remote	control.
	.....	Lock	the	operation	of	the	remote	control.				
To	unlock,	use	the	top	control.
If	 the	 top...

55

Setting
Use	the	Point	▲▼	buttons	to	select	Off,	On1	or On2,	
and	then	press	the	SELECT	button	to	make	a	choice.
Change the PIN code lock setting
Enter a PIN code
Use	the	Point	▲▼	buttons	to	enter	a	number.	Press	the	
Point	◄	►	buttons	to	fix	the	number	and	move	the	red	
frame	pointer	to	the	next	box.	 The	number	changes	to	
✳.	If	you	fixed	an	incorrect	number,	use	the	Point	◄	► 
buttons	to	move	the	pointer	to	the	number	you	want	to	
correct,	and	then	enter	the	correct	number.
Repeat	this	step	to...

56

Setting
This	 function	 provides	 the	 following	 options	 in	 the	 cooling	
fans’	operation	when	the	projector	is	turned	off	(p.20).
	L1	......	Normal	operation
	L2	......	Slower	 and	 lower-sound	 than	 the	 normal	 operation	
(L1),	 but	 it	 takes	 more	 time	 to	 cool	 the	 projector	
down.
Fan
Choose	the	running	speed	of	cooling	fans	from	the	following	
options	according	to	the	ground	elevation	under	which	you	
use	the	projector.	
Off................	Normal	speed.	Set	this	function	to	Off	when...

57

Setting
Factory default
This	function	returns	all	setting	values	except	for	the	User 
logo,	PIN code lock,	Logo PIN code lock,	Lamp counter	
and	Filter counter	to	the	factory	default	settings.
Factory default
warning log
This	function	records	anomalous	operations	while	the	
projector	is	in	operation	and	use	it	when	diagnosing	faults.	
Up	to	10	warning	logs	are	displayed	with	the	latest	warning	
message	at	the	top	of	the	list,	followed	by	previous	warning	
messages	in	chronological	order.	
✔Note:...

58

Information
Input Source Information Display
The	Information	Menu	is	used	for	checking	the	status	of	the	image	signal	being	projected	and	the	operation	of	the	projector.
H-sync freq .
V-sync freq .
Lamp counter
Information Menu
The	horizontal	frequency	of	the	input	signal	is	displayed	in	
KHz,	or	- - - -	KHz when	no	signal.
The	vertical	frequency	of	the	input	signal	is	displayed	in	Hz,	
or	- - - - Hz when	no	signal.	Numbers	of	Hz	doubles	when	
during	Interlace.
The	cumulative	lamp	operating	time	is...

59

Information
The	WARNING	indicator	shows	the	state	of	the	function	which	protects	the	projector.	Check	the	state	of	the	
WARNING	indicator	and	the	POWER	indicator	to	take	proper	maintenance.	
wARNING indicator
The projector is shut down and the w ARNING 
indicator is blinking red .
When	the	temperature	inside	the	projector	reaches	a	
certain	level,	the	projector	will	be	automatically	shut	down	to	
protect	the	inside	of	the	projector.	The	POWER	indicator	is	
blinking	while	the	projector	is	being...

60

Maintenance and Cleaning
Filter	prevents	dust	from	accumulating	on	the	optical	elements	inside	the	projector.	Should	the	filters	become	
clogged	with	dust	particles,	it	will	reduce	cooling	fans’	effectiveness	and	may	result	in	internal	heat	buildup	
and	adversely	affect	the	life	of	the	projector.	If	a	“Filter	warning”	icon	appears	on	the	screen,	clean	the	filters	
immediately.	Clean	the	filters	by	following	the	steps	below.
CAUTION
Do	not	operate	the	projector	with	the	filters	
removed.	Dust	may...