Sanyo Projector Plc Xd2200 User Manual

41

Video Input
Use	the 	Point 	◄►	buttons 	to 	adjust 	the 	gamma 	value 	to	
obtain	a	better	balance	of	contrast	(from	0	to	15).
Gamma
Press	 the	Point	◄	button	 to	decrease	 the	sharpness	 of	the	
image;	 press	the	Point	►	button	 to	increase	 the	sharpness	
of	the	image	(from	0	to	15).
Sharpness
An	interlaced	 video	signal	 can	be	displayed	 in	progressive	
mode.	Select	one	of	the	following	options.
	Off	.........	Disabled.
	L1	..........	For	an	active	picture.
	L2	..........	For	a	still	picture....

42

Video Input
This	projector	has	the	picture	screen	resize	function,	which	enables	you	to	customize	the	image	size.
Normal
Screen Size Adjustment
Screen Menu1
2
Provide	the	image	to	fit	the	screen	size	while	maintaining	
the	aspect	ratio	of	the	input	signal.
Custom adj .
✔Note:
	 •	When	no	signal	is	detected,	Normal	is	set	
automatically.
	 •	The	adjustable	range	for	Scale H/V	and	
Position H/V	is	limited	depending	on	the	
input	signal.
	 •	wide	cannot	be	operated	when	720p,	
105i	or	1080i	is...

4

Setting
Setting
Setting Menu
Press	the	MENU	button	to	display	the	On-Screen	
Menu.	Press	the	Point	▲▼	buttons	to	select	Setting	
and	press	the	Point	►	or	the	SELECT	button	to	access	
the	submenu	items.
1
2Use	the	Point	▲▼	buttons	to	select	the	desired	item	
and	then	press	the	Point	►	or	the	SELECT	button	to	
access	the	selected	item.
This	projector	 has	a	Setting	 menu	that	allows	 you	to	set	 up	
the	other	various	functions	described	below.
Language
Menu position
This	function	is	used	to	change...

44

Setting
✔Note:
	 •	Auto Keystone	corrects	vertical	distortion	only,	
not	correct	horizontal	distortion.
	 •	The	Auto	Keystone	function	cannot	work	when	
the	Ceiling	feature	is	set	On	in	the	Setting	menu	
(p.49).
	 •	Perfect	correction	of	the	image	distortion	cannot	
be	ensured	with	the	 Auto	setup	function.	If	the	
distortion	is	not	corrected	properly	by	pressing	the	
AUTO	SETUP	or	the	AUTO	SET 	button,	adjust	
manually	by	pressing	the	KEYSTONE	button	on	
the	remote	control	or	selecting	Keystone	in...

45

Setting
Keystone
This	function	is	used	to	adjust	keystone	distortion	of	the		
projected	image.	Use	the	Point	▲▼	buttons	to	choose	the	
item	you	want	to	adjust.
	Keystone
			To	correct	keystone	distortion,	press	the	SELECT 	button.			
			Keystone appears on the screen. Use the Point ▲▼ 
			buttons	to	correct	keystone	distortion	(p.23).
 Store
    Store	.....Keep	the	 keystone	correction	even	when	the	 AC	
																			power	cord	is	unplugged.
			Reset	.....Release	the	keystone	correction	when...

46

Setting
Logo (Logo and Logo PIN code lock settings)
Logo selectThis	function	allows	you	to	customize	the	screen	logo	with	
Logo select,	capture,	Logo PIN code lock	and	Logo PIN 
code change	functions.
✔Note:
			When	On	is	selected	in	the	Logo	PIN	code	lock	function,	
Logo select	and	Capture	functions	cannot	be	selected.
Logo select
This	function	decides	on	the	starting-up	display	from	
among	following	options.	
	User	........	Show	the	image	you	captured.		
	Default	....	Show	the	factory-set	logo....

47

Setting
Capture
Capture
This	function	enables	you	to	capture	an	image	being	
projected	to	use	it	for	a	starting-up	display	or	interval	of	
presentations.
Select	Capture	and	press	the	SELECT	button.		
A	confirmation	box	appears	and	select	yes	to	capture	the	
projected	image.
After 	capturing 	the 	projected 	image, 	go 	to 	the 	Logo 	select	
function	 and	set	it	to	User.	Then	 the	captured	 image	will	be	
displayed 	the 	next 	time 	you 	turn 	on 	the 	projector 	or 	when	
you	press	the	NO	SHOW...

48

Setting
Enter a Logo PIN code
Use	the	Point	▲▼	buttons	to	enter	a	number.	Press	the	
Point	◄►	buttons	to	fix	the	number	and	move	the	red	
frame	pointer	to	the	next	box.	The	number	changes	to	
✳.	If	you	fixed	an	incorrect	number,	use	the	Point	◄►	
buttons	to	move	the	pointer	to	the	number	you	want	to	
correct,	and	then	enter	the	correct	number.
Repeat	this	step	to	complete	entering	a	four-digit	
number.
After	entering	 the	four-digit	 number,	move	the	pointer	 to	
Set.	Press	 the	SELECT 	button	 so...

49

Setting
Ceiling 
Rear 
Ceiling
When	this 	function 	is 	set 	to 	On,	 the 	picture 	will 	be 	top/
bottom 	and 	left/right 	reversed. 	This 	function 	is 	used 	to	
project	the	image	from	a	ceiling-mounted	projector.
Rear
When	 this	function	 is	set	 to	On,	the	 picture	 will	be	left/right	
reversed. 	This 	function 	is 	used 	to 	project 	the 	image 	from	
rear	of	the	screen.
Terminal
Terminal
The	 COMPUTER	 IN	2/MONITOR	 OUT	terminal	 on	the	 back	
of	the	 projector	 is	switchable	 for	computer...

50

Setting
Time	left	before	Lamp	is	off.
Power management
For	reducing	power	consumption	as	well	as	maintaining	
the	lamp	life,	the	Power	management	function	turns	off	the	
projection	lamp	when	the	projector	is	not	operated	for	a	
certain	period.
Select	one	of	the	following	options:
Ready	...............	 When	the	lamp	has	been	fully	cooled	
down,	the	POWER	indicator	changes	
to	green	blinking.	In	this	condition,	
the	projection	lamp	will	be	turned	on	if	
the	input	signal	is	reconnected	or	any	
button...