Sanyo PLV Z700 Projector User Manual
Here you can view all the pages of manual Sanyo PLV Z700 Projector User Manual. The Sanyo manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 2
2 This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. It uses built-in multimedia features, a palette of 1.07 billion colors, and matrix liquid crystal display (LCD) technology. ◆ Short Throw & Wide-Range Zoom Lens The 2x Short Throw & Wide-Range Zoom Lens is capable of throwing a 100” diagonal image from a distance of 9.8’ (3.0 m) to 20.0’ (6.1 m). ◆ Lens Shift The Lens Shift function provides a greater installation flexibility....
Page 3
3 TRADEMARKS ● Each name of corporations or products in this owner’s manual is either a trademark or a registered trademark of its respective corporation. Table of Contents Features and Design . . . . . . . . . . . . . . . .2 Table of Contents . . . . . . . . . . . . . . . . . . 3 To the Owner . . . . . . . . . . . . . . . . . . . . . 4 Safety Instructions . . . . . . . . . . . . . . . . . 5 Air Circulation 6 Installing the Projector in Proper Position 6 Moving the Projector 6 Compliance . . ....
Page 4
4 Safety Precaution WARNING: ● THIS APPARATUS MUST BE EARTHED . ● TO R E D U C E T H E R I S K O F F I R E O R ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE . – This projector produces intense light from the projection lens. Avoid staring directly into the lens as much as possible, other wise eye damage could result. Be especially careful that children do not stare directly into the beam. – Install the projector in a proper position. Other wise it may...
Page 5
5 All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Follow all warnings and instructions marked on the projector. For added protection to the projector during lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the...
Page 6
6 Moving the Projector When moving the projector, make sure that the automatic slide shutter is closed, retract the adjustable feet, and lock the lens with the Lens Shift Lock to prevent damage to the lens and cabinet. When the projector is unused for an extended period, put it into a suitable case. Care must be taken when handling the projector; do not drop, bump, subject it to strong forces, or put other things on the cabinet. 2020Do not tilt the projector more than 20 degrees from side to...
Page 7
7 AC Power Cord for the United Kingdom: This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus A S A. If the fuse cover is detachable, never use the plug with the cover omitted. If a replacement fuse cover is required, ensure it is of the same colour as that visible on the pin face of the plug...
Page 8
8 Bottom Back !2 !3!4!6 Adjustable Feet !7 RGB Panel Cleaning Hole Cover !1 !6 !5 !1 Terminals and Connectors !2 Main On/Off Switch !3 Power Cord Connector !4 Air Intake Vent !5 Lamp Cover ✽ Kensington Security Slot This slot is for a Kensington lock used to deter theft of the projector. *Kensington is a registered trademark of ACCO Brands Corporation. q Exhaust VentFront q erytuo w Top Controls and Indicators e Automatic Slide Shutter r Projection Lens t Focus Ring y Zoom Lever u...
Page 9
9 q COMPUTER Connect the computer output signal, or RGB Scart 21-pin video output to this connector (p.16). Rear Terminal qw t e y VIDEO Connect the composite video output signal from video equipment to this jack (p.15).e COMPONENT 1 or COMPONENT 2 Connect the component video output signal to these jacks (p.15). w S-VIDEO Connect the S-Video output signal from video equipment to this jack (p.15). r SERVICE PORT This jack is used to service the projector. r y t HDMI 1/HDMI 2* Connect the...
Page 10
10 Top Control qwe r tyui i INFO . button Display the input source information (p.43). t INPUT button Select an input source (p.24). e LAMP REPLACE indicator Lights yellow light when the projection lamp reaches its end of life (pp.49, 53). w WARNING indicator – Lights red light when the projector detects an abnormal condition. – Blinks red when the internal temperature of the projector exceeds the operating range (pp.44, 53). u OK button Execute the item selected or use it to access the...