Sanyo Plc Xl51projector User Manual

							Multimedia  Projector 
MODEL PLC-XL51
Owner’s Manual
Network Supported 
	 	 ❏	Wireless LAN  IEEE802.11b/g
		❏  Wired LAN   100-Base-TX/10-Base-T
Memory Viewer 
	 	 ❏	SD Memory Card Viewer 
  ✽	 Refer to the owner’s manual below for details 
about network and memory viewer function.
	 	 ■	 Network Set-up and Operation 
        (For Windows / For Macintosh)
  ■	 Memory Viewer function
	 	 ■	 PJ Network Manager (For Windows) 
						

							2
Features and Design
◆ Large Screen in Limited Space
Short  focus  lens  allows  you  to  project  large  images  
from  short  distance  (p.14).    Images  can  be  projected 
on the floor.
 
◆	 Security Function
The Security function helps you to ensure security of 
the projector. With the Key lock function, you can lock 
the operation on the top control or remote control 
(p.51). PIN code lock functions prevents unauthorized 
use of the projector (pp.20, 52–53).
◆Logo Function
The  Logo  function  allows  you  to  customize  the 
screen  logo. The  Logo  page  identifies  the  owner  of 
the projector (pp.47, 48).
◆Antitheft Alarm Function
This  projector  is  equipped  with  an  Antitheft  alarm 
function  which  sounds  when  vibration  is  detected 
(pp.56–59).  A  built-in  rechargeable  battery  is  used  for 
the alarm.
◆Simple Computer System Setting
The  projector  has  a  Multi-scan  system  to  conform  to 
almost all computer output signals quickly (p.28).
◆Compatibility
The  projector  widely  accepts  various  video  and 
computer  input  signals  including;  Computers,  6  Color 
systems  (PAL,  SECAM,  NTSC,  NTSC4.43,  PAL-M,  or 
PAL-N), Component video, S-Video and RGB scart.
◆Quick Termination
The  AC  power  cord  can  be  unplugged  immediately 
after  turning  off  the  projector  without  waiting  for  the 
projector to cool down (p.21).
◆Switchable Interface Terminal
Th e   p r o j e c t o r   p r ov i d e s   a   s w i t ch a b l e   i n t e r fa c e 
terminal. You  can  use  the  terminal  as  computer  input 
or monitor output conveniently (p.49).
◆Useful Functions for Presentations
  -  
The digital zoom function expands (to approx. 16 
times of the screen size) the image size, allowing 
you  to  focus  on  crucial  information  during  the 
presentation. (p.36)
 -  A blackboard can be used as a projection screen.  
(pp.32-33,  40-41)  *The  board  color  is  limited  to 
Green.
 -  At  the  time  of  simple  projection  on  the  colored 
wall,  you  can  get  the  close  color  image  to  the 
color  image  projected  on  a  white  screen  by 
selecting  the  similar  color  to  the  wall  color  from 
the preset four colors. 
◆Multilanguage Menu Display
The  Operation  menu  is  available  in  16  languages: 
E n g l i s h ,   G e r m a n ,   Fr e n ch ,   I t a l i a n ,   S p a n i s h , 
Portuguese,  Dutch,  Swedish,  Finnish,  Polish, 
Hungarian,  Romanian,  Russian,  Chinese,  Korean, 
and Japanese (p.45).
◆Power Management
The  Power  management  function  reduces  power 
consumption and maintains lamp life (p.50).
◆Input Search Function
  Input signal can be searched automatically. (p.49)
◆LAN Network Function
Th i s   p r o j e c t o r   i s   l o a d e d   w i t h   t h e   W i r e d   a n d 
Wireless  LAN  network  function. You  can  project 
an  image  on  a  computer  as  well  as  operate  and 
manage  the  projector  via  network.  For  details, 
refer  to  the  owner’s  manual “Network  Set-up  and 
Operation.” 
◆Memory Viewer Function
Insert  the  dedicated  SD  memor y  card  into  the 
projector  to  project  images  or  presentation  data 
stored  within. You  do  not  have  to  carry  computers 
o r   o t h e r   e q u i p m e n t   fo r   a   p r e s e n t a t i o n .   * S D 
memory  card  is  not  supplied  with  the  projector. 
For details, refer to the owner’s manual of Memory 
viewer.
This  Multimedia  Projector  is  designed  with  the  most  advanced  technology  for  portability,  durability,  and  ease  of  use.  
This  projector  utilizes  built-in  multimedia  features,  a  palette  of  16.77  million  colors,  and  matrix  liquid  crystal  display 
(LCD) technology.
✔Note:
•The On-Screen Menu and figures in this manual may differ slightly from the product.
•The contents of this manual are subject to change without notice. 
						

							3
Table of Contents
Trademarks
Each  name  of  corporations  or  products  in  this  book  is  either  a  registered  trademark  or  a  trademark  of  its 
respective corporation.
Features and Design  . . . . . . . . . . . . . . . . . . . . . . . 2
Table of Contents   . . . . . . . . . . . . . . . . . . . . . . . . . . 3
To the Owner  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Safety Instructions  . . . . . . . . . . . . . . . . . . . . . . . . . 5
Air Circulation  6
Moving the Projector  6
Installing the Projector in Proper Position  7
Compliance  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Part Names and Functions   . . . . . . . . . . . . . . . . . .9
Front  9
Back  9
Bottom  9
Side Terminal  10
Top  11
Remote Control  12
Remote Control Battery Installation  13
Operating Range  13
Installation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Positioning the Projector  14
Adjustable Feet  14
Mounting the Rear Leg and the Stand  15
Connecting to a Computer  16
Connecting to Video Equipment (Video, S-Video) 1 7
Connecting to Video Equipment  
(Component and RGB Scart)  18
Connecting the AC Power Cord  19
Basic Operation   . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Turning On the Projector  20
Turning Off the Projector  21
How to Operate the On-Screen Menu  22
Menu Bar  23
Zoom Adjustment  24
Screen Position Adjustment  24
Focus Adjustment  24
Keystone Correction  24
Sound Adjustment  25
Remote Control Operation  25
Computer Input  . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Input Source Selection  27
Computer System Selection  28
Auto PC Adjustment  29
Manual PC Adjustment  30
Image Level Selection   32
Image Level Adjustment  34
Screen Size Adjustment  35
Video Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Input Source Selection  
(Video, S-Video, Component)  37
Input Source Selection (RGB Scart 21-pin)  38
Video System Selection  39
Image Level Selection   40
Image Level Adjustment  42
Screen Size Adjustment  44
Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Setting  45
Antitheft Alarm Function . . . . . . . . . . . . . . . . . . .56
How to Use the Antitheft Alarm Function  56
Maintenance and Cleaning  . . . . . . . . . . . . . . . .60
Warning Indicator  60
Cleaning the Air Filter  61
Resetting the Filter Counter  61
Cleaning the Projection Window  62
Cleaning the Projector Cabinet  62
Lamp Replacement  63
Lamp Replacement Counter  64
Appendix  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Troubleshooting  65
Menu Tree  68
Indicators and Projector Condition  70
Compatible Computer Specifications  71
Technical Specifications  72
Optional Parts  73
Configurations of Terminals  74
Dimensions  74
PIN Code Number Memo  75
PJ Link Notice  76 
						

							CAUTION
Not for use in a computer room as defined in the 
Standard for the Protection of Electronic Computer/
Data Processing Equipment, ANSI/NFPA 75.
Ne peut être utilisé dans une salle d’ordinateurs telle 
que définie dans la norme ANSI/NFPA 75 Standard for 
Protection of Electronic Computer/Data Processing 
Equipment. 
4
To the Owner
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER 
(OR BACK). NO USER-SERVICEABLE 
PARTS INSIDE EXCEPT LAMP 
REPLACEMENT.  REFER SERVICING TO 
QUALIFIED SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS 
VOLTAGE CONSTITUTING A RISK OF 
ELECTRIC SHOCK IS PRESENT WITHIN THIS 
UNIT.
THIS SYMBOL INDICATES THAT THERE 
ARE IMPORTANT OPERATING AND 
MAINTENANCE INSTRUCTIONS IN THE 
OWNER'S MANUAL WITH THIS UNIT.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
Before installing and operating the projector, read this 
manual thoroughly.
The projector provides many convenient features and 
functions. Operating the projector properly enables 
you to manage those features and maintains it in good 
condition for many years to come.
Improper operation may result in not only shortening the 
product life, but also malfunctions, fire hazard, or other 
accidents.
If your projector seems to operate improperly, read this 
manual again, check operations and cable connections 
and try the solutions in the “Troubleshooting” section 
in the back of this manual. If the problem still persists, 
contact the dealer where you purchased the projector or 
the service center.      Safety PrecautionWARNING: 
l	THIS APPARATUS MUST BE EARTHED.
  l	TO   R E D U C E   T H E   R I S K   O F   F I R E   O R   E L E C T R I C 
SHOCK,  DO  NOT  EXPOSE THIS  APPLIANCE TO 
RAIN OR MOISTURE.
–    This projector produces intense light from the projection 
lens. Avoid staring directly into the lens, other wise eye 
damage could result. Be especially careful that children do 
not stare directly into the beam.
–    Install the projector in a proper position. Other wise it may 
result in fire hazard.
–    Allowing the proper amount of space on the projector 
cabinet is critical for proper air circulation and cooling 
of the unit. The dimensions shown here indicate the 
minimum space required. If the projector is to be built 
into a compartment or similarly enclosed, these minimum 
distances must be maintained.  Do not cover the ventilation 
slot on the projector. Heat build-up can reduce the service 
life of your projector, and can also be dangerous.
–    If the projector is unused for an extended time, unplug the 
projector from the power outlet.
–     Do not project the same image for a long time.  The 
afterimage may remain on the LCD panels by the 
characteristic of panel.
1.5 (50 cm)
3 (1 m)
The symbol mark and recycling systems described below 
apply to EU countries and do not apply to countries in other 
areas of the world.
Your product is designed and manufactured with high quality 
materials and components which can be recycled and/or 
reused.
The symbol mark means that electrical and electronic 
equipment, batteries and accumulators, at their end-of-
life, should be disposed of separately from your household 
waste.
Note: 
If a chemical symbol is printed beneath the symbol mark, 
this chemical symbol means that the battery or accumulator 
contains a heavy metal at a certain concentration. This will be 
indicated as follows: Hg: mercury, Cd: cadmium, Pb: lead
In the European Union there are separate collection systems 
for used electrical and electronic equipment, 
batteries and accumulators.
Please, dispose of them correctly at your local 
community waste collection/recycling centre.
Please, help us to conserve the environment 
we live in! 
READ  AND  KEEP THIS  OWNER ’S  MANUAL  FOR 
LATER USE.
 
CAUTION ON HANGING FROM  THE CEILING
When hanging the projector from the 
ceiling, clean air intake vents, air filters, 
or top of the projector periodically with 
a vacuum cleaner.  If you leave the 
projector without cleaning for a long 
time, the dust will block the operation 
of the cooling function, and it may 
cause a breakdown or a disaster.
DO NOT SET  THE PROjECTOR IN GREAS y, WET , 
OR SMOKy CONDITIONS SUCH  AS IN A KITCHEN 
TO PREVENT A BREAKDOWN OR  A DISASTER.  IF 
THE PROjECT OR COMES IN CONTACT  WITH OIL OR 
CHEMICALS , IT MAy BECOME DETERIORATED . 
						

							5
Safety Instructions
All the safety and operating instructions should be read before 
the product is operated.
Read  all  of  the  instructions  given  here  and  retain  them  for 
later  use.  Unplug  this  projector  from  AC  power  supply  before 
cleaning.  Do  not  use  liquid  or  aerosol  cleaners.  Use  a  damp 
cloth for cleaning.
Follow all warnings and instructions marked on the projector.
For added protection to the projector during a lightning storm, 
or  when  it  is  left  unattended  and  unused  for  long  periods  of 
time,  unplug  it  from  the  wall  outlet. This  will  prevent  damage 
due to lightning and power line surges.
Do not expose this unit to rain or use near water... for example, 
in a wet basement, near a swimming pool, etc...
D o   n o t   u s e   a tt a ch m e n t s   n o t   r e c o m m e n d e d   b y   t h e 
manufacturer as they may cause hazards.
Do  not  place  this  projector  on  an  unstable  cart,  stand,  or 
table.   The  projector  may  fall,  causing  serious  injury  to  a  child 
or  adult,  and  serious  damage  to  the  projector.  Use  only  with 
a  cart  or  stand  recommended  by  the  manufacturer,  or  sold 
with  the  projector.  Wall  or  shelf  mounting  should  follow  the 
manufacturer's  instructions,  and  should  use  a  mounting  kit 
approved by the manufacturers.
A n   a p p l i a n c e   a n d   c a r t   c o m b i n a t i o n 
should  be  moved  with  care.  Quick  stops, 
excessive force, and uneven surfaces may 
cause  the  appliance  and  cart  combination 
to overturn.
Slots  and  openings  in  the  back  and  bottom  of  the  cabinet  are 
provided  for  ventilation,  to  ensure  reliable  operation  of  the 
equipment and to protect it from overheating.
The  openings  should  never  be  covered  with  cloth  or  other 
materials,  and  the  bottom  opening  should  not  be  blocked 
by  placing  the  projector  on  a  bed,  sofa,  rug,  or  other  similar 
surface. This  projector  should  never  be  placed  near  or  over  a 
radiator or heat register.
This  projector  should  not  be  placed  in  a  built-in  installation 
such as a book case unless proper ventilation is provided.Never  push  objects  of  any  kind  into  this  projector  through 
cabinet  slots  as  they  may  touch  dangerous  voltage  points 
or  short  out  parts  that  could  result  in  a  fire  or  electric  shock.  
Never spill liquid of any kind on the projector.
Do  not  install  the  projector  near  the  ventilation  duct  of  air-
conditioning equipment.
This projector should be operated only from the type of power 
source  indicated  on  the  marking  label.  If  you  are  not  sure  of 
the  type  of  power  supplied,  consult  your  authorized  dealer  or 
local power company.
Do  not  overload  wall  outlets  and  extension  cords  as  this  can 
result in fire or electric shock. Do not allow anything to rest on 
the  power  cord.  Do  not  locate  this  projector  where  the  cord 
may be damaged by persons walking on it.
Do  not  attempt  to  service  this  projector  yourself  as  opening 
or  removing  covers  may  expose  you  to  dangerous  voltage 
or  other  hazards.  Refer  all  ser vicing  to  qualified  ser vice 
personnel.
Unplug  this  projector  from  wall  outlet  and  refer  servicing  to 
qualified service personnel under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the projector.
c. If the projector has been exposed to rain or water.
d.  
If  the  projector  does  not  operate  normally  by  following 
the  operating  instructions.  Adjust  only  those  controls  that 
are  covered  by  the  operating  instructions  as  improper 
adjustment  of  other  controls  may  result  in  damage  and  will 
often  require  extensive  work  by  a  qualified  technician  to 
restore the projector to normal operation.
e.   If  the  projector  has  been  dropped  or  the  cabinet  has  been 
damaged.
f.    When the projector exhibits a distinct change in performance 
this indicates a need for service.
When  replacement  parts  are  required,  be  sure  the  ser vice 
technician  has  used  replacement  parts  specified  by  the 
manufacturer that have the same characteristics as the original 
part.  Unauthorized  substitutions  may  result  in  fire,  electric 
shock, or injury to persons.
Upon  completion  of  any  service  or  repairs  to  this  projector, 
ask  the  service  technician  to  perform  routine  safety  checks  to 
determine that the projector is in safe operating condition.
NOTE FOR CUSTOMERS IN THE US
Hg  LAMP(S)  INSIDE THIS PRODUCT  CONTAIN MERCURY  
AND  MUST  BE  RECYCLED  OR  DISPOSED  OF  ACCORDING 
TO LOCAL, STATE OR FEDERAL LAWS . 
						

							6
Safety InstructionsMoving the Projector
When the projector is not in use for an extended period, 
put it into a suitable case.
Handle the projector carefully; do not drop, bump, 
subject it to strong forces, or put other things on the 
cabinet. 
Openings in the cabinet are provided for ventilation. To 
ensure reliable operation of the product and to protect it 
from overheating, these openings must not be blocked 
or covered.
Air Circulation
Exhaust Vent
(Hot air exhaust)
Air Intake 
Vent
CAUTION
Hot air is exhausted from the exhaust vent. When 
using or installing the projector, the following 
precautions should be taken. 
–   
Do not put any flammable objects or spray can 
near the projector. Hot air is exhausted from the air 
vents.
–    Keep the exhaust vent at least 3’ (1 m) away from 
any objects.
–    Do not touch a peripheral part of the exhaust vent, 
especially screws and metallic part. This area will 
become hot while the projector is being used.
–    Do not put anything on the projector. Objects put 
on the cabinet will not only get damaged but also 
may cause fire hazard by heat.
Cooling fans are provided to cool down the projector. 
The fan’s running speed is changed according to the 
temperature inside the projector.
  CAUTION IN CARR yING OR 
TRANSPORTING THE PROjECTOR
–    Do not drop or bump the projector, other wise 
damages or malfunctions may result.
–    Do not hold the rear leg.
–    When carrying the projector, use a suitable carrying 
case.
–    Do not transport the projector by courier or any 
other transport service in an unsuitable transport 
case. This may cause damage to the projector. For 
information about transporting the projector by 
courier or any other transport service, consult your 
dealer.
–    Do not put the projector in a case before it is cooled 
enough. 
						

							7
Do not roll the projector more 
than 10 degrees from side to 
side. 
Do not put the projector on 
either side C or E to project an 
image. 
Install the projector properly. Improper Installation may reduce the lamp life and cause fire hazard.
Installing the Projector in Proper Position
1010
Side A Side B
Side C Side F
Side E
Side D
This side is Side A or B.
✔Note:
•   Fix the projector when installing it so that the 
projector would not fall down.
5
5
Do not roll the projector more 
than 5 degrees from side 
to side when side A or B is 
downward. 
55
Safety Instructions
  CAUTION
–    Do not put anything or sit on the 
projector, other wise, it may fall down 
or cause failure of the projector or 
injury.  
–    Choose the running speed of cooling 
fans in the fan control setting 
according to the altitude in which the 
projector is being used (p.54).  Failure 
to do so may affect the projector life. 
  
For  ceiling  mounting,  you  need  the  ceiling  mount  kit  designed  for  this  projector.  When  not 
mounted  properly,  the  projector  may  fall,  causing  hazards  or  injury.  For  details,  consult  your 
dealer.   The  warranty  on  this  projector  does  not  cover  any  damage  caused  by  use  of  any  non-
recommended ceiling mount kit or installation of the ceiling mount kit in an improper location.
CAUTION ON CEILING MOUNTING 
						

							8
Compliance
AC Power Cord for the United Kingdom:
This  cord  is  already  fitted  with  a  moulded  plug  incorporating  a  fuse,  the  value  of  which  is  indicated  on  the  pin  face  of  the  plug. 
Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus A S A. If the fuse 
cover  is  detachable,  never  use  the  plug  with  the  cover  omitted.  If  a  replacement  fuse  cover  is  required,  ensure  it  is  of  the  same 
colour as that visible on the pin face of the plug (i.e. red or orange). Fuse covers are available from the Parts Department indicated 
in your User Instructions.
If the plug supplied is not suitable for your socket outlet, it should be cut off and destroyed.
The end of the flexible cord should be suitably prepared and the correct plug fitted.
WARNING:  A  PLUG WITH  BARED  FLEXIBLE  CORD  IS  HAZARDOUS  IF  ENGAGED  IN  A  LIVE  SOCKET 
OUTLET.
The Wires in this mains lead are coloured in accordance with the following code:
Green-and-yellow ············ Earth
Blue ·················\
················ Neutral\
Brown ··················\
············ Live
As  the  colours  of  the  wires  in  the  mains  lead  of  this  apparatus  may  not  correspond  with  the  coloured  markings  identifying  the 
terminals in your plug proceed as follows:
The  wire  which  is  coloured  green-and-yellow  must  be  connected  to  the  terminal  in  the  plug  which  is  marked  by  the  letter  E  or  by 
the safety earth symbol  
 or coloured green or green-and-yellow.
The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.
WARNING: THIS APPARATUS MUST BE EARTHED.
The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.  
AC Power Cord for the United States and Canada:
AC Power Cord used in the United States and Canada is listed by the Under writers Laboratories (UL) and 
certified by the Canadian Standard Association (CSA).
AC  Power  Cord  has  a  grounding-type AC  line  plug. This  is  a  safety  feature  to  be  sure  that  the  plug  will  fit 
into the power outlet. Do not try to defeat this safety feature. Should you be unable to insert the plug into 
the outlet, contact your electrician.
GROUND
THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASIL y ACCESSIBLE.
AC Power Cord Requirement
Federal Communications Commission Notice
This  equipment  has  been  tested  and  found  to  comply  with  the  limits  for  a  Class  B  digital  device,  pursuant  to  Part  15  of  the 
FCC  Rules. These  limits  are  designed  to  provide  reasonable  protection  against  harmful  interference  in  a  residential  installation. 
This  equipment  generates,  uses,  and  can  radiate  radio  frequency  energy.  If  it  is  not  installed  and  used  in  accordance  with  the 
instructions,  it  may  cause  harmful  interference  to  radio  communications.  However,  there  is  no  guarantee  that  interference  will  not 
occur  in  a  particular  installation.  If  this  equipment  does  cause  harmful  interference  to  radio  or  television  reception,  which  can  be 
determined  by  turning  the  equipment  off  and  on,  the  user  is  encouraged  to  try  to  correct  the  interference  by  one  or  more  of  the 
following measures:
– Reorient or relocate the receiving  antenna.
–  Increase the separation between the equipment and receiver.
–  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–  Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with Class B limits in Subpa\
rt B of Part 15 of FCC Rules.
Do  not  make  any  changes  or  modifications  to  the  equipment  unless  other wise  specified  in  the  instructions.  If  such  changes  or 
modifications should be made, you could be required to stop operation of the equipment.
Model Number(s)   : PLC-XL51
Trade Name     : Sanyo
Responsible party   : SANYO FISHER COMPANY
Address     : 21605 Plummer Street, Chatsworth, California 91311
Telephone No.    : (818)998-7322 
						

							9
Bottom
Back
w Top controls and Indicators
e Exhaust Vent
r
y
!1
!3
!2
 CAUTION
Hot air is exhausted from the exhaust 
vent. Do not put heat-sensitive objects 
near this side.
w
t
e
Front
Part Names and Functions
iu
 CAUTION
The Infrared Remote Receiver sticks out 
of the cabinet surface.  If the Infrared 
Remote Receiver is put on the wall 
or floor directly, the Infrared Remote 
Receiver may damage.
r Rear Leg
t Adjustable Feet
y Air Intake Vent 
u Terminals and Connectors
i Power Cord Connector
o Fo cus Lever
!0 Projection Window
q
✽
✽Kensington Security Slot This slot is for a Kensington lock used 
to deter theft of the projector.
* Kensington is a registered trademark of ACCO Brands 
Corporation.
✔Note:
    Do not touch the projection window, 
other wise, the window may be soiled 
and the image can be smudgy.
q Infrared Remote Receiver
!1 Speaker
!2 Battery Cover
!3 Lamp Cover
!4 Air Filter
o!0
!4 
						

							10
Part Names and FunctionsSide Terminal
qwer
o!0!2!1
!0 S-VIDEO IN
Connect the S-VIDEO output from video equipment to 
this jack (p.17).
!4 AUDIO IN
Connect the audio output from video equipment 
connected to
 t, !0 or !3 to this jack. [When the audio 
output is monaural, connect it to L (MONO) jack (pp.17-
18).
!2 AUDIO IN COMPUTER
Connect the audio output (stereo) from a computer  
connected to e or r to this jack (pp.16, 18).
!3 VIDEO IN
Connect the composite video output from video 
equipment to VIDEO jack (p.17).
r COMPUTER IN 2/MONITOR OUT
This terminal is switchable and can be used for input 
from a computer or output to the other monitor.  
Set the terminal up as either Computer input or Monitor 
output properly. [Used for Monitor out, this terminal 
outputs only incoming signal from COMPUTER IN 1 
terminal (pp. 16, 49)].!1 AUDIO OUT(VARIABLE)
Connect an external audio amplifier to this jack (pp.16-
18).
This terminal outputs sound from AUDIO IN terminal (!2 
or !4).
w SERVICE PORT
This jack is used to service the projector. 
e COMPUTER IN 1
Connect output signal from a computer, or RGB scart 21-
pin video output to this terminal (pp.16, 18).
When the cable is of the longer variety, it is advisable to 
use this terminal and not COMPUTER IN 2/MONITOR 
O U T.
!3
o ALARM buttons
Use these buttons when setting up the Alarm
function (pp.56-57).
t COMPONENT IN
Connect the component video output signal to these 
jacks (p.18). 
!4
q LAN Connection Terminal
Connect the LAN cable (refer to the owner’s manual 
“Network Set-up and Operation”).i SD MEMOR y CARD SLOT
Insert the SD memory card (not supplied) for Memory 
viewer operation (refer to the owner’s manual of 
Memory Viewer function).
u SD MEMOR y CARD INDICATOR
Display the status of SD memory card.  When inserting 
SD memory card, the indicator lights, and when 
removing SD memory card, the indicator turns off.
y WIRELESS INDICATOR
Display the status of wireless network. Refer to the 
owner’s manual “Network Set-up and Operation”.
t
y
u
i