Sanyo Plc Xl51projector User Manual

Multimedia  Projector 
MODEL PLC-XL51
Owner’s Manual
Network Supported 
	 	 ❏	Wireless LAN  IEEE802.11b/g
		❏  Wired LAN   100-Base-TX/10-Base-T
Memory Viewer 
	 	 ❏	SD Memory Card Viewer 
  ✽	 Refer to the owner’s manual below for details 
about network and memory viewer function.
	 	 ■	 Network Set-up and Operation 
        (For Windows / For Macintosh)
  ■	 Memory Viewer function
	 	 ■	 PJ Network Manager (For Windows) 

2
Features and Design
◆ Large Screen in Limited Space
Short  focus  lens  allows  you  to  project  large  images  
from  short  distance  (p.14).    Images  can  be  projected 
on the floor.
 
◆	 Security Function
The Security function helps you to ensure security of 
the projector. With the Key lock function, you can lock 
the operation on the top control or remote control 
(p.51). PIN code lock functions prevents unauthorized 
use of the projector (pp.20, 52–53).
◆Logo Function
The  Logo  function...

3
Table of Contents
Trademarks
Each  name  of  corporations  or  products  in  this  book  is  either  a  registered  trademark  or  a  trademark  of  its 
respective corporation.
Features and Design  . . . . . . . . . . . . . . . . . . . . . . . 2
Table of Contents   . . . . . . . . . . . . . . . . . . . . . . . . . . 3
To the Owner  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Safety Instructions  . . . . . . . . . . . . . . . . . . . . . . . . . 5
Air Circulation  6
Moving the...

CAUTION
Not for use in a computer room as defined in the 
Standard for the Protection of Electronic Computer/
Data Processing Equipment, ANSI/NFPA 75.
Ne peut être utilisé dans une salle d’ordinateurs telle 
que définie dans la norme ANSI/NFPA 75 Standard for 
Protection of Electronic Computer/Data Processing 
Equipment. 
4
To the Owner
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER 
(OR BACK). NO USER-SERVICEABLE 
PARTS INSIDE EXCEPT LAMP 
REPLACEMENT.  REFER SERVICING TO 
QUALIFIED...

5
Safety Instructions
All the safety and operating instructions should be read before 
the product is operated.
Read  all  of  the  instructions  given  here  and  retain  them  for 
later  use.  Unplug  this  projector  from  AC  power  supply  before 
cleaning.  Do  not  use  liquid  or  aerosol  cleaners.  Use  a  damp 
cloth for cleaning.
Follow all warnings and instructions marked on the projector.
For added protection to the projector during a lightning storm, 
or  when  it  is  left  unattended...

6
Safety InstructionsMoving the Projector
When the projector is not in use for an extended period, 
put it into a suitable case.
Handle the projector carefully; do not drop, bump, 
subject it to strong forces, or put other things on the 
cabinet. 
Openings in the cabinet are provided for ventilation. To 
ensure reliable operation of the product and to protect it 
from overheating, these openings must not be blocked 
or covered.
Air Circulation
Exhaust Vent
(Hot air exhaust)
Air Intake 
Vent
CAUTION
Hot...

7
Do not roll the projector more 
than 10 degrees from side to 
side. 
Do not put the projector on 
either side C or E to project an 
image. 
Install the projector properly. Improper Installation may reduce the lamp life and cause fire hazard.
Installing the Projector in Proper Position
1010
Side A Side B
Side C Side F
Side E
Side D
This side is Side A or B.
✔Note:
•   Fix the projector when installing it so that the 
projector would not fall down.
5
5
Do not roll the projector more 
than 5 degrees from...

8
Compliance
AC Power Cord for the United Kingdom:
This  cord  is  already  fitted  with  a  moulded  plug  incorporating  a  fuse,  the  value  of  which  is  indicated  on  the  pin  face  of  the  plug. 
Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus A S A. If the fuse 
cover  is  detachable,  never  use  the  plug  with  the  cover  omitted.  If  a  replacement  fuse  cover  is  required,  ensure  it  is  of  the  same 
colour as that...

9
Bottom
Back
w Top controls and Indicators
e Exhaust Vent
r
y
!1
!3
!2
 CAUTION
Hot air is exhausted from the exhaust 
vent. Do not put heat-sensitive objects 
near this side.
w
t
e
Front
Part Names and Functions
iu
 CAUTION
The Infrared Remote Receiver sticks out 
of the cabinet surface.  If the Infrared 
Remote Receiver is put on the wall 
or floor directly, the Infrared Remote 
Receiver may damage.
r Rear Leg
t Adjustable Feet
y Air Intake Vent 
u Terminals and Connectors
i Power Cord Connector
o Fo...

10
Part Names and FunctionsSide Terminal
qwer
o!0!2!1
!0 S-VIDEO IN
Connect the S-VIDEO output from video equipment to 
this jack (p.17).
!4 AUDIO IN
Connect the audio output from video equipment 
connected to
 t, !0 or !3 to this jack. [When the audio 
output is monaural, connect it to L (MONO) jack (pp.17-
18).
!2 AUDIO IN COMPUTER
Connect the audio output (stereo) from a computer  
connected to e or r to this jack (pp.16, 18).
!3 VIDEO IN
Connect the composite video output from video 
equipment to...