Sanyo Plc Xl51projector User Manual

Appendix
Compatible Computer Specifications
Basically this projector can accept the signal from all computers with th\
e V-, H-Frequency mentioned below 
and less than 140 MHz of Dot Clock.  When these modes are selected, PC adjustment can be limited.
ON-SCREENDISPLA yRESOLUTION H-Freq.
(kHz) V-Freq.
(Hz)
VGA1 640x480 31.4759.88
VGA2 720x400 31.4770.09
VGA3 640x400 31.4770.09
VGA4 640x480 37.8674.38
VGA5 640x480 37.8672.81
VGA6 640x480 37.5075.00
VGA7 640x480 43.26985.00
MAC LC13 640x48034.9766.60
MAC 13...

AppendixTechnical Specifications
Mechanical Information
Projector Type Multi-media Projector
Dimensions (W x H x D) 14.72” x 7.75” x 19.49” (374.0 mm x 196.8 mm x 495.0 mm) (Not including protrusions)
Net Weight 16.9 lbs (7.7 kg)
Feet Adjustment 0˚ to 1.0˚
Panel Resolution
LCD Panel System0.8” P-Si TFT Active Matrix type
Panel Resolution 1,024 x 768 dots
Number of Pixels 2,359,296 (1,024 x 768 x 3 panels)
Signal Compatibility
Color SystemPAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N
High Definition TV...

Appendix
The parts listed below are optionally available. When ordering those parts, specify the item name and Model No. 
to the sales dealer.
Optional Parts
l The specifications are subject to change without notice.
l  LCD panels are manufactured to the highest possible standards.  Even though 99.99% of the pixels are 
effective, a tiny fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD 
panels.
Model No.
SCART-VGA Cable : POA-CA-SCART
VGA-Cable (10 m) :...

Appendix
Terminal : Mini DIN 8-PIN
12345876
SERVICE PORT CONNECTOR
R X D
-----
-----
GND
RTS / CTS
GND
GND
Serial
1
2
3
4
5
6
7
8
COMPUTER INPUT / MONITOR OUTPUT TERMINAL (ANALOG)
Terminal : Analog RGB (Mini D-sub 15 pin)
512341096781514131112
Configurations of Terminals
Red Input / Output
Ground (Horiz.sync.)
Green Input / Output
-----
Blue Input / Output
Ground (Red)
Ground (Green)
Ground (Blue)
1
5
2
4
3
6
7
8
5V / -----
Horiz. sync. Input/Output (Composite H/V sync.)
Ground (Vert.sync.)
DDC data /...

Appendix
PIN Code Number Memo
Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or 
lost the number and unable to operate the projector, contact the service station. 
Factory default set No: 1 2 3 4*
Factory default set No: 4 3 2 1*
*Should  the  four-digit  number  be  changed,  the factory set number will be invalid.
PIN Code Lock No.
Logo PIN Code Lock No.
Factory default set No: 1 1 1 1*
Alarm PIN Code No.
Put the label below (supplied) to a...

76
Appendix
This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information 
System Industries Association). The projector supports all commands defined by PJLink Class 1 and is verified 
conformance with PJLink Standard Class 1.
PJLink is a registered trademark of JBMIA and pending trademark in some \
countries.
PJ Link Notice
Projector InputPJLink InputParameter
Computer 1 RGB RGB 111
RGB (Scart) RGB 212
Computer 2 RGB RGB 313
Video Auto VIDEO 121
Video VIDEO...

SANyO Electric Co., Ltd.KV7A