Sanyo Plc Xe40 Projector User Manual

41
Video Input
This projector has the picture screen resize function, which enables you to customize the image size.
Press the MENU button to display the On-Screen
Menu.  Press the Point
7 8buttons to move the red
framed pointer to the Screen Menu icon.
Press the Point edbuttons and move the red framed
pointer to the function that you want to select and
then press the SELECT button.
1
2Move the red framed pointer to a
function and press the SELECT
button.
Screen Menu
Screen Menu icon
Provide the image at...

42
Display Blue back
Press the Point7 8buttons to switch on/off.  When this
function is “On,” a blue image is displayed while the input
signal is not detected. 
Keystone
Press the MENU button to display the On-Screen
Menu.  Press the Point
7 8buttons to move the red
framed pointer to the Setting Menu icon.1
2
Language
The language used in the On-Screen Menu is available in
English, German, French, Italian, Spanish, Portuguese,
Dutch, Swedish, Finnish, Polish, Hungarian, Romanian,
Russian, Chinese,...

43
Setting
Capture
This function enables you to capture the image being
projected and use it for a start-up display or interval of
presentations.  
After capturing the projected image, go to the Logo
select function and set it to “User”.  Then the captured
image is displayed when turning on the projector next
time or pressing the NO SHOW button.  (p. 25) 
To capture the image, select Yes.  To cancel the
Capture function, select No.  
✔Note:
• Before capturing an image, select Standard in the Image
Select...

44
Logo PIN code lock Dialog Box
QuitPointer
Enter a Logo PIN code
Select a number by pressing the Point7 8buttons and
fix the number with the SELECT button.  The number
changes to ✳.  If you fixed an incorrect number, move
the pointer to Set or Clear once by pressing the Point
dbutton, then return to Logo PIN code.  Enter the
correct number again.
Repeat this step to complete entering a four-digit
number. 
When the four-digit number is fixed, the pointer
automatically moves to Set.  Press the SELECT...

45
Setting
Ceiling 
Rear  Ceiling
When this function is “On,” the picture is top/bottom and
left/right reversed.  This function is used to project the
image from a ceiling mounting the projector.
Rear
When this function is “On,” the picture is left/right
reversed.  This function is used to project the image to a
rear projection screen.
Terminal
The COMPUTER IN 2/MONITOR OUT terminal on the back
of the projector is switchable for computer input or monitor
output.  (p. 9)  Select Computer 2 or Monitor Out...

46
Setting
On start
When this function is “On”, the projector is automatically
turned on just by connecting the AC power cord to an
outlet.
✔Note:
• Be sure to turn the projector off properly (see “Turning Off the 
Projector” on p. 20).  If the projector is turned off in the incorrect
sequence, the On start function does not operate properly.
Lamp control
Remote control
This projector provides two different remote control codes;
the factory-set, initial code (Code 1) and the secondary code
(Code 2)....

47
Setting
Security (Alarm and PIN code lock settings)
This function allows you to use PIN code lock and Alarm
function to set the security for the projector operation.
PIN code lock
This function prevents the projector from being operated
by an unauthorized person and provides the following
settings for security options.
Off........The projector is not locked with the PIN code.
On1.....Require to enter the PIN code every time
turning on the projector.  
On2 ......Require to enter the PIN code to operate...

48
Setting
The PIN code can be changed to your desired four-digit
number.
Select PIN code change with the Point 
dbutton, and
press the SELECT button to display the New PIN code
input dialog box.  
Select a number with the Point
7 8buttons and fix the
number with the SELECT button. Repeat it to complete
entering a four-digit number.  When the four-digit
number is fixed, the pointer automatically moves to
Set.  Then press the SELECT button.  
To Change the PIN code 
Change the PIN code
Select PIN code...

49
This function is used to reset the lamp replacement
counter.  When replacing the projection lamp, reset the
lamp replacement counter by using this function.  See p. 57
for operation.Lamp counter 
Factory default
This function returns all setting values except for the user
logo, PIN code lock, Logo PIN code lock and the lamp
counter to the factory default settings.
Select Factory default and
this box appears.  Select
Yes , and the next box
appears. 
Factory default
Select Yes to
activate it.
This...

50
How to Use the Antitheft Alarm Function
Antitheft Alarm Function
The Antitheft alarm function is to prevent the projector from being stolen.  With this function on, the alarm rings
when an unauthorized person tries to move the projector.
Press the F button twice to turn the alarm function on.  The
ALARM indicator blinks for a few seconds and the projector
enters the warning mode.
While the Antitheft alarm function is on, the projector emits
a low-pitched sound when detecting a vibration.  
When the...