Sanyo Plc Xe40 Projector User Manual

21
Basic Operation
Menu barPointer
(red framed ) Menu icon
Item data
Press the Point 7 8
buttons to adjust
the value.
SELECT
button
Pointer (red framed )
Press the Point ed
buttons to move the
pointer.
Item
How to Operate the On-Screen Menu
On-Screen Menu
Quit  
Exit this menu.
The projector can be adjusted or set via the On-Screen
Menu. Refer to the following pages regarding each
adjustment and setting procedure.
Press the Point 
7 8buttons to select a Menu icon.
Press the Point 
edbuttons to select an...

22
Basic Operation
Menu Bar
PC System Menu
Used to select
computer
system.  (p. 27)
Image Adjust Menu
Used to adjust
computer image among
Contrast,Brightness,
Color temp., White
balance (R/G/B),
Sharpness, Gamma.  
(pp. 32, 33)
Setting Menu
Used to set the
projectors
operating
configurations.
(pp. 42-49)
Sound Menu
Used to adjust
the volume or
mute the sound.
(p. 24)
Image Select Menu
Used to select an image
level among Dynamic,
Standard, Real,
Blackboard(Green), and
Image 1 ~ 4.  (p. 31)
For computer...

23
Basic Operation
Adjust lens focus with the Focus lever.
Focus Lever
•The arrows are white when there is no correction.
•The direction of the arrow which are being corrected
turns red.
•The arrows disappear at the maximum correction.
•If you press the KEYSTONE button on the remote
control once more while the keystone dialog box is
being displayed, the keystone adjustment is canceled.
•The adjustable range can be limited depending on the
input signal.
•The projected picture may fluctuate momently...

24
Basic Operation
Remote Control
Remote Control Operation
Use the remote control for some frequently used operations.
Just pressing one of the buttons enables you to make the operation easily and you do not have to call up the
On-Screen Menu.
COMPUTER /VIDEO
button 
✔Note:
• See the next page for the other buttons.
Press the FREEZE button to freeze the picture on the
screen.  To cancel the Freeze function, press the FREEZE
button again or press any other button.  
FREEZE button
Press the COMPUTER or...

25
Basic Operation
Remote Control
D.ZOOM
buttons
NO SHOW
button 
AUTO PC
button
✔Note:
• See the previous page for the other buttons.
KEYSTONE button  
(See p. 23)
POINT ed
buttons
black out ➜the captured image ➜normal ➜ • • • • •
Press the NO SHOW button to black out the image.  To
restore to normal, press the NO SHOW button again or
press any other button.  When a projected image is
captured and set as “User” in the Logo selection (p. 43),
the screen changes each time you press the NO SHOW
button as...

26
Select either Computer 1 or Computer 2 by pressing the
COMPUTER button on the remote control.
Before using COMPUTER button, select the correct input
source through Menu operation as described below.
Press the MENU button to display the On-Screen
Menu.  Press the Point
7 8buttons to move the red
framed pointer to the Input Menu icon.1
Computer
1
Input Menu
Press the Point edbuttons to move the red arrow
pointer to either Computer 1 or Computer 2, and then
press the SELECT button.  2
After the Source...

27
Computer Input
The Auto PC Adjustment
function operates to adjust 
the projector. 
PC System Menu
The PC System Menu icon 
Selected system is 
displayed.
Systems on this dialog box 
can be selected.
Press the MENU button to display the On-Screen
Menu.  Press the Point
7 8buttons to move the red
framed pointer to the PC System Menu icon.
Press the Point edbuttons to move the red arrow
pointer to the system that you want to set, and then
press the SELECT button.  
1
2
PC System Menu
Custom Mode (1~5)...

28
Computer Input
Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Vertical to
conform to your computer.  Auto PC Adjustment function can be operated as follows.
Move the red framed
pointer to the Auto PC Adj.
item and press the SELECT
button.
Please wait... appears
while Auto PC adjustment
is in process.
PC Adjust Menu
PC Adjust Menu icon
To store adjustment parameters
Adjustment parameters from Auto PC Adjustment can be
memorized in this projector....

29
Computer Input
Press the MENU button to display the On-Screen
Menu.  Press the Point
7 8buttons to move the red
framed pointer to the PC Adjust Menu icon.1
2Press the Point edbuttons to move the red framed
pointer to the item that you want to adjust and then
press the SELECT button to display the adjustment
dialog box.  Press the Point
7 8buttons to adjust the
value.
Move the red framed
pointer to an item and
press the SELECT button.
PC Adjust MenuPC Adjust Menu icon
Cut out flicker from the image...

30
Computer Input
Adjust the horizontal area displayed by this projector.  Press
the Point
7 8buttons to decrease/increase the value. Display area H
Adjust the vertical area displayed by this projector.  Press
the Point
7 8buttons to decrease/increase the value. Display area V
Reset
Store
Exit the PC Adjust Menu.
Quit
To store adjusted data, move the red framed pointer to the
Store and then press the SELECT button.  Move the red
arrow pointer to any of Mode 1 to 5 in which you want to
store and then...