Samsung Idcs 500 General Description Manual

							iDCS 18D KEYSET
(See Figure 2–2)
!32 character display (2 x 16) with three
associated soft keys and a scroll key
!18 programmable keys with tri-colored
lights
!Four fixed function keys
!Terminal Status Indicator
!Built-in speakerphone
!Eight selectable ring tones
!UP/DOWN buttons for digital control of
speaker, handset and ringer volumes
!Desk- or wall-mounted
!Available in dark gray or light gray
FIGURE 2–1
FIGURE 2–2
iDCS 28D KEYSET
(See Figure 2–1)
!32 character display (2 x 16) with three
associated soft keys and a scroll key
!28 programmable keys with tri-colored
lights
!Four fixed function keys
!Terminal Status Indicator
!Built-in speakerphone
!Eight selectable ring tones
!UP/DOWN buttons for digital control of
speaker, handset and ringer volumes
!Desk- or wall-mounted
!Available in dark gray or light gray
2.4 STATION EQUIPMENT
2.4.1 iDCS SERIES EQUIPMENT
2.11     
						

							iDCS 8D KEYSET
(see Figure 2–3)
!32 character display (2 x 16) with three asso-
ciated soft keys and a scroll key
!8 programmable keys with tri-colored lights
!Four fixed function keys
!Terminal Status Indicator
!Built-in speakerphone
!Eight selectable ring tones
!UP/DOWN buttons for digital control of
speaker, handset and ringer volumes
!Desk- or wall-mounted
!Available in dark gray or light gray
iDCS 64B AOM
(See Figure 2–4)
!64 programmable keys with red lights
!A maximum of 2 can be assigned to any
keyset to provide additional programmable
keys
!A maximum of 4 per DCS System
!Available in dark gray or light gray
FIGURE 2–3
FIGURE 2–4
iDCS 14B STRIP
(See Figure 2–5)
!14 programmable keys with red lights
!A maximum of one can be assigned to any keyset to
provide additional programmable keys
!Available in dark gray or light gray
FIGURE 2–5
2.12       
						

							iDCS KDB-DIGITAL LINE INTERFACE (FKDBD)
This is a daughterboard that can be installed only in the 18 or 28 button keyset. The
FKDBD will provide one additional DLI circuit for the connection of any digital station de-
vice such as a keyset, add-on module or DPIM. This FKDBD will only operate when the
keyset is connected to an 8 port DLI card so it can use the second B channel. Each port on
this card is intended for connection to one telephone. Connecting multiple telephones to
a port may result in incorrect operation or damage to the card.
iDCS KDB-SINGLE LINE INTERFACE (FKDBS)
This is a daughter board that can be installed only in the 18 or 28 button keyset. The
FKDBS will provide one additional SLI circuit for the connection of any standard tele-
phone device. This FKDBS will only operate when the keyset is connected to an 8 port DLI
card it can use the second B channel. Each port on this card is intended for connection to
one telephone. Connecting multiple telephones to a port may result in incorrect operation
or damage to the card.
NOTE: The circuitry on a FKDBS does not provide a loop open disconnect signal or have
the over-voltage protection necessary for OPX operation.
iDCS KDB-FULL DUPLEX (FKDBF)
The standard speakerphone mode of operation for a iDCS keyset is “half duplex”. This
means that you cannot transmit and receive speech at the same time. Adding a FKDBF to
your keyset will convert the speakerphone into full duplex mode enhancing its operation.
In addition the FKDBF may have up to three (3) external microphones attached to it for
conference room type applications. These microphones require an “EXTMIC” key pro-
grammed on the keyset to activate or deactivate them.
2.13 
						

							2.4.2 DCS SERIES EQUIPMENT
LCD 24B KEYSET (See Figure 2–6)
!Built-in speakerphone
!24 programmable keys (16 with tri-col-
ored LEDs)
!Four fixed function keys
!32 character display (2 x 16) with three
associated soft keys and a scroll key
!UP/DOWN buttons for digital control of
speaker, handset and ringer volumes
!Eight selectable ring tones
!Desk- or wall-mounted
!Available in almond or charcoal
LCD 12B KEYSET (see Figure 2–7)
!32 character display (2 x 16) with three
associated soft keys and a scroll key
!Built-in speakerphone
!12 programmable keys (six with tri-col-
ored LEDs)
!Four fixed function keys
!UP/DOWN buttons for digital control of
speaker, handset and ringer volumes
!Eight selectable ring tones
!Desk- or wall-mounted
!Available in almond or charcoal
FIGURE 2–6
FIGURE 2–7
FIGURE 2–8
7 BUTTON MODEL KEYSET
(see Figure 2–8)
!7 programmable keys
!Three fixed function keys
!UP/DOWN buttons for digital control of
speaker and ringer volumes
!Eight selectable ring tones
!Desk or wall mounted
!Available in almond or charcoal
2.14       
						

							FIGURE 2–11
32 BUTTON ADD-ON MODULE (AOM)
(see Figure 2–9)
!32 programmable keys
!Two fixed function keys
!UP/DOWN buttons for digital control of
speaker and ringer volumes
!Available in almond or charcoal
!One or two can be assigned to any DCS
keyset to provide executive off-hook voice
announce and additional programmable
keys (see Figure 2–10)
!Can operate as a stand-alone handsfree tele-
phone unit
DOOR PHONE INTERFACE
MODULE (DPIM) & DOOR PHONE
(see Figures 2–11 and 2–12)
!The DPIM adapts any DLI circuit for use with
the door phone unit
!Commonly used to request entry through
locked doors (interior or exterior) or as a
room monitoring box
!Provides contact control to be used with cus-
tomer-provided electric door lock
!Door phone is wall-mounted
!Door phone is weather resistant
FIGURE 2–9
FIGURE 2–10
2.15       
						

							SINGLE LINE TELEPHONE
(See Figure 2–14)
!Four fixed function keys: hold, flash, new
call, and monitor.
!Data Port: selectable to share station ex-
tension or utilize a separate extension
!On hook dialing
!Message Waiting/Ring Indicator
!Desk or wall mounted
!Ring volume control,
!Four available ring tones.
!Available in almond and black
Note: This single line telephone set is FCC approved for direct connection to the public telephone network.
FCC # A3LKOR-24627-TE-T   REN 0.9B  UL LISTED 19X9   FILE # ETI 8093
FIGURE 2–12
64 BUTTON MODULE (See Figure 2–13)
!64 programmable keys
!Available in almond and charcoal
!A maximum of 2 can be assigned
to any DCS keyset to provide
additional programmable keys
!A maximum of 4 per DCS System
FIGURE 2–14
FIGURE 2–13
2.16       
						

							KDb-DLI
This is a daughterboard that can be installed only in the 12 or 24 button keyset. The KDb-
DLI will provide one additional DLI circuit for the connection of any digital station device
such as a keyset, add-on module or DPIM. This KDb-DLI will only operate when the keyset
is connected to an 8 port DLI card so it can use the second B channel. Each port on this
card is intended for connection to one telephone. Connecting multiple telephones to a
port may result in incorrect operation or damage to the card. See the installation manual
part 3 for details.
KDb-SLI
This is a daughter board that can be installed only in the 12 or 24 button keyset. The KDb-
SLI will provide one additional SLI circuit for the connection of any standard telephone
device. This KDb-SLI will only operate when the keyset is connected to an 8 port DLI card
it can use the second B channel. Each port on this card is intended for connection to one
telephone. Connecting multiple telephones to a port may result in incorrect operation or
damage to the card. See the installation manual part 3 for details.
NOTE: The circuitry on a KDb-SLI does not provide a loop open disconnect signal or have
the over-voltage protection necessary for OPX operation.
2.17 
						

							PART 3. SPECIFICATIONS
The following tables provide technical data for the iDCS 500 hybrid/key telephone sys-
tem.
3.1aELECTRICAL SPECIFICATIONS (PSU 60)
AC INPUT 120  (88–132) VAC (48–63 Hz)*
220 (180–260) VAC (48–63 Hz)
POWER CONSUMPTION (MAX)120 WATTS MAX. PER PSU FUSE RATING 3 AMP
BTU RATING (MAX) 6.8 BTU/MINUTE
DC OUTPUT +5 VOLTS 5.0 AMPS MAX
-5 VOLTS 0.5 AMPS MAX
-48 VOLTS 1.4 AMPS MAXIMUM
-56 VOLTS Charger 0.45 AMPS MAX
*Normal factory setting
3.1bELECTRICAL SPECIFICATIONS (PSU 60B)
AC INPUT 100–120 (88–132) VAC (48–63 Hz)*
220–240 (180–260) VAC (48–63 Hz)
POWER CONSUMPTION (MAX)150 WATTS MAX. PER PSU FUSE RATING 5 AMP
BTU RATING (MAX) 8 BTU/MINUTE
DC OUTPUT +5 VOLTS 7.0 AMPS MAX
-5 VOLTS 1.5 AMPS MAX
-48 VOLTS 1.4 AMPS MAXIMUM
-54 VOLTS Charger 0.45 AMPS MAX
*Normal factory setting
3.1 
						

							3.2DIMENSIONS AND WEIGHTS
HEIGHT WIDTH DEPTHWEIGHT
iDCS 500 BASIC SYSTEM:
SINGLE CABINET 17.5 22.5 12 35  lb.
EXPANDED SYSTEM: TWO CABINETS 35 22.5 12 70  lb.
EXPANDED SYSTEM: THREE CABINETS 52.5 22.5 12105 lb.
DIGITAL KEYSET (ALL MODELS) 4.25 8.50 9 2.563  lb.
ADD-ON MODULE4.25 4.25 9 1.188 lb.
DOOR PHONE 5 3.88 1.25 6.8 oz.
3.3ENVIRONMENTAL LIMITS
OPERATING TEMPERATURE 32–104 °F/0–40 °C
STORAGE TEMPERATURE -13–158 °F/-25–70 °C
HUMIDITY                                                                                     10%-90% non-condensing
3.4CABLE REQUIREMENTS
EQUIPMENTCABLE AWGMAX FEET MAX METERS
DIGITAL KEYSET 1 PR. TWISTED 241300 400
ADD-ON MODULE 1 PR. TWISTED 241300 400
SINGLE LINE STATION 1 PR. TWISTED 243000 1 KM
DOOR PHONE 2 PR. TWISTED 24330* 100
SIM 1 PR. TWISTED 241300 400
*This is the maximum distance a door phone can be from the DPIM. The DPIM can be up
to 900 cable feet from the KSU. The total distance must not exceed 1230 feet.
3.2