Ricoh Projector PJ WX4141N User Manual

If [Access Restriction Type] in [Network Application Settings] is specified as [Access No.], theaccess number input screen is displayed after the projection server is selected. Contact your server
administrator for your access number.
If [DLNA Certification Mode] in [Network Application Settings] is specified as [Enable], some
video files do not appear in the file list. For details, see page 131 "Network Application Settings
Menu".
4. Select the file, [Slideshow], or folder, and then press the...

• [] button: Decreases the volume.
• [Menu] button: Returns to the file list screen.
• The rewind and fast forward speed increases three levels each time the button is pressed. To reduce the speed to its original, press the [Enter] button.
• If any operation except for volume adjustment is performed during the slide show, the slide show stops.
5. Using the Projector via a Network
80    

Projecting Images Using DLNA-Compatible
Devices
The projector can project still images and videos transmitted from DLNA-compatible devices.
• For details about the supported file types for this function, see page 75 "Using the Server Function".
Preparation
To project files transmitted from DLNA-compatible devices, specify the following settings: • Connect the projector to a network using [Network Settings]
• Select [Enable] in [Remote Projection Control] under [Network Application Settings]
For...

3.Check the projector name on the projection screen.
4.On the DLNA-compatible device, select the projector name checked in Step 3 as a
destination device.
5. On the DLNA-compatible device, select the file you want to project.
The selected file is projected.
• For details about how to control the projected image and quit the projection, see the manuals provided with the DLNA-compatible devices and applications.
5. Using the Projector via a Network
82CZE162    

6. Using the Interactive Function(RICOH PJ WX4141NI only)
This chapter explains how to use the interactive function.
Preparations for Using the Interactive Function
• To use the interactive function, you must use an RGB cable or an HDMI cable to connect the projector and computer. You cannot use the interactive function if another type of cable is used forthe connection.
• The interactive function cannot be used when a screen is displayed on the Windows extended desktop.
The interactive function allows...

StepSetting ContentsReference3Enable the projector to recognize the electronic
pen.page 88 "Enabling the Projector
to Recognize the Electronic Pen"4Install RICOH PJ Interactive Software on a
computer.page 90 "Installing RICOH PJ
Interactive Software"
• You only need to perform Steps 1 to 3 to use the electronic pen to operate the computer from its projected image.
• You must perform Steps 1 to 4 to write and draw on the screen.
Enabling Interactive Mode
In Interactive Mode, the projector...

4.Select [Interactive], and then press the [Enter] button.
5. Select [Interactive Mode], and then press the [Enter] button.
6. Select [On], and then press the [Enter] button.
7.Press the [Menu] button twice to close the menu screen.
To go on to register a computer USB adapter, see page 85 "Registering the Computer USB
Adapter".
Registering the Computer USB Adapter
• Keep computer USB adapter out of reach of children. If a child accidentally swallows a computer USB adapter, consult a doctor...

ItemSpecificationsUSB port• USB Type ADo not use a USB hub.
1. Have a computer USB adapter at hand.
2.Turn on the projector.
For details about how to turn on the projector, see page 35 "Turning On the Projector".
3. Connect the computer to the projector using an RGB cable or an HDMI cable.
For details about how to connect the computer to the projector, see page 30 "Connecting to the
RGB out port" and page 30 "Connecting to the HDMI port".
4. Project the computer screen on the...

8.Check that [Interactive Mode] is set to [On].
For the setting procedure, see page 84 "Enabling Interactive Mode".
9. Select [PC Adapter Registration] and press the [Enter] button.
10. Install the computer USB adapter into the computer.
Upon being installed, the computer USB adapter flickers twice every 0.5 seconds.
• If registration succeeds The message "Registration has completed." appears. The computer USB adapter flickers every
two seconds. Press the [Enter] button to close the...

11.Press the [Menu] button twice to close the menu screen.
• Do not register computer USB adapters for multiple projectors at the same time. The computer USB
adapter might not be registered correctly.
Enabling the Projector to Recognize the Electronic Pen
Once the projector recognizes the electronic pen, you can directly operate the computer display on the
screen.
1. Turn on the projector.
For details about how to turn on the projector, see page 35 "Turning On the Projector".
2. Connect the...