Ricoh Projector PJ WX4141N User Manual

5.Specify the default gateway.
6. Select [OK] on the confirmation screen, and then press the [Enter] button.
To project a computer's screen, see page 73 "Projecting a Computer's Screen Using
QuickProjection".
Configuring the Wireless LAN Settings for Infrastructure Mode
Configuring the settings by Simple Wireless LAN Setup
The projector supports the following simple wireless LAN setup method. Contact your network
administrator for the available simple wireless LAN setup method in your...

6.Select [Disable DHCP (Manual Settings)] or [Enable DHCP (Auto Settings)], and then press
the [Enter] button.
If you select [Enable DHCP (Auto Settings)], proceed to Step 10.
7. Specify the projector's IP address.
8. Specify the subnet mask.
9. Specify the default gateway.
10. Select [OK] on the confirmation screen, and then press the [Enter] button.
The wireless LAN setup is complete.
To project a computer's screen, see page 73 "Projecting a Computer's Screen Using...

4.Enter the network key.
When connecting to a network for which a network key is not set, the network key input screen is not displayed. Proceed to Step 5.
5. Select [Disable DHCP (Manual Settings)] or [Enable DHCP (Auto Settings)], and then press
the [Enter] button.
If you select [Enable DHCP (Auto Settings)], proceed to Step 9.
6. Specify the projector's IP address.
7. Specify the subnet mask.
8. Specify the default gateway.
9. Select [OK] on the confirmation screen, and then press the [Enter]...

Projecting a Computer's Screen via a Network
The projector does not support the Network Projector function of Windows. Use QuickProjection, which
is the application provided with the projector for projecting a computer's screen via a network.
This section explains how to use QuickProjection in Windows as an example. The basic operation flow is
the same as when a Mac OS is used.
How to Use QuickProjection
QuickProjection is included on the supplied CD-ROM.
QuickProjection operating environment is...

• To delete QuickProjection, delete "QuickProjection.exe" and the "QuickProjection" folder in"%appdata%\RICOH". For details about how to delete QuickProjection, see QuickProjection Help.
• Two versions of QuickProjection are available for Mac OS, one supports audio and the other does not.
Projecting a Computer's Screen Using QuickProjection
• To project images by ad hoc wireless communication, log on to the computer with administrator privileges.
• Depending on the settings of...

5.Enter the identification code on the QuickProjection dialog.
The projector's name or IP address can also be entered instead of the identification code.
6. Click [Projection].
The computer's screen is projected.
While the computer's screen is being projected, a small QuickProjection is displayed in the lower
right corner of the computer's screen.
To pause the projection, click .
To quit the projection, click [
], and then click [OK].
• For detailed QuickProjection operating methods,...

Using the Server Function
The projector can access the projection server and the DLNA-compatible devices via a network to
project files stored on them. The projector can project still images by using its server function. The
projector can also project videos stored on DLNA-compatible devices if DLNA certification mode is
disabled. The supported file types for the projection server and the DLNA-compatible devices are shown
below:Still images (Projection server/DLNA-compatible devices)ItemRequirementFile...

• Characters that can be used for file names and folder names are single-byte letters and numbersand characters used in the language specified in [Language] under [Default Settings 2]. If
characters for languages other than the language specified are used, the file name or folder name
will not be displayed properly.
• If the total number of characters in the file name and the path exceeds 255, the file cannot appear on the list.
• Data in a folder that is stored six levels or more into a hierarchy cannot...

• Directory pathThis is a path for the directory in which files projected by the projector are stored.
To store files converted by JPEG Conversion Tool on the network server, register the directory
path. For details, see JPEG Conversion Tool Help.
If you restrict access to the projection server with an access number, create a folder whose
name is the number that you specify as the access number. After this, store the files to be
projected in the folder. To project the files stored in the folder, enter...

• For details about how to change the settings, see page 103 "Changing the Settings". For detailsabout the setting items, see page 131 "Network Application Settings Menu".
Using the DLNA Server Function
The projector is compatible with DLNA. DLNA is the guideline for sharing content on a network.
Therefore, the projector can access DLNA-compatible devices such as file servers, tablet computers, or
smartphones and project JPEG files stored on them.
To access to DLNA-compatible devices from...