Ricoh Projector PJ WX4141N User Manual
Here you can view all the pages of manual Ricoh Projector PJ WX4141N User Manual. The Ricoh manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 121
ItemDefaultProjection ModeSelect the projection method according to how the projector is positioned. • Standard Select this mode when the projector is placed in front of a screen. • Rear Select this mode when the projector is placed behind a screen. • Ceiling Select this mode when the projector is mounted on the ceiling in front of a screen. • Rear Ceiling Select this mode when the projector is mounted on the ceiling behind a screen.StandardRemote Control ID Select the projector remote control ID....
Page 122
![Page 122
ItemDefaultHigh Altitude ModeThe number of fan rotations is high when set to [On]. The air is thin at high
elevations, so the cooling efficiency of the projector is reduced. Select
[On] when using the projector at an altitude of more than 1,500 meters
(4,921 feet). Do not select [On] when the altitude is less than 1,500
meters (4,921 feet).OffKey Lock
Specify whether or not to lock the buttons on the control panel. You canchange this setting to [Off] by pressing the [AV Mute] button on the...](http://img.usermanuals.tech/thumb/64/99661/w300_projector_manual_8238_d-121.png "Page 122
ItemDefaultHigh Altitude ModeThe number of fan rotations is high when set to [On]. The air is thin at high
elevations, so the cooling efficiency of the projector is reduced. Select
[On] when using the projector at an altitude of more than 1,500 meters
(4,921 feet). Do not select [On] when the altitude is less than 1,500
meters (4,921 feet).OffKey Lock
Specify whether or not to lock the buttons on the control panel. You canchange this setting to [Off] by pressing the [AV Mute] button on the...")
ItemDefaultHigh Altitude ModeThe number of fan rotations is high when set to [On]. The air is thin at high elevations, so the cooling efficiency of the projector is reduced. Select [On] when using the projector at an altitude of more than 1,500 meters (4,921 feet). Do not select [On] when the altitude is less than 1,500 meters (4,921 feet).OffKey Lock Specify whether or not to lock the buttons on the control panel. You canchange this setting to [Off] by pressing the [AV Mute] button on the...
Page 123
![Page 123
USB Settings Menu
This section explains the items in the USB Settings menu under the Network/USB Settings menu tab.
You can also specify and check the items in the USB Settings menu using Web Image Monitor.
However, the following items are available only on the menu screen.
• [Remove USB Mem.] in [Settings]
• [USB Memory Free Space (KB)] and [USB Memory Access Status] in [Display Status]
On Web Image Monitor, you can check [Network/USB Func. Firmware Version] and [Energy Saving
IO Firmware Version] on...](http://img.usermanuals.tech/thumb/64/99661/w300_projector_manual_8238_d-122.png "Page 123
USB Settings Menu
This section explains the items in the USB Settings menu under the Network/USB Settings menu tab.
You can also specify and check the items in the USB Settings menu using Web Image Monitor.
However, the following items are available only on the menu screen.
• [Remove USB Mem.] in [Settings]
• [USB Memory Free Space (KB)] and [USB Memory Access Status] in [Display Status]
On Web Image Monitor, you can check [Network/USB Func. Firmware Version] and [Energy Saving
IO Firmware Version] on...")
USB Settings Menu This section explains the items in the USB Settings menu under the Network/USB Settings menu tab. You can also specify and check the items in the USB Settings menu using Web Image Monitor. However, the following items are available only on the menu screen. • [Remove USB Mem.] in [Settings] • [USB Memory Free Space (KB)] and [USB Memory Access Status] in [Display Status] On Web Image Monitor, you can check [Network/USB Func. Firmware Version] and [Energy Saving IO Firmware Version] on...
Page 124
CommonItemDefaultAuto Start SlideshowSpecify whether or not to start a slide show automatically when the projector is connected to the USB device.OffRemove USB Mem. The USB device can be removed when this command is executed.- Display Status USB Memory ItemDefaultUSB Memory Free Space (KB)Display the space available on the USB device (Displayed in KB).-USB Memory Access Status Display whether or not the USB device can be accessed.- Firmware Version ItemDefaultNetwork/USB Func. Firmware VersionDisplay the...
Page 125
![Page 125
Network Settings Menu
This section explains the items in the Network Settings menu under the Network/USB Settings menu tab.
You can also specify and check the items in the Network Settings menu using Web Image Monitor.
However, the following items are available only on the menu screen.
• [Simple Wireless LAN Setup] and [Reset Wireless LAN Settings] in [Wireless LAN]
• [Import Device Certificate] and [Certificate List] in [LAN Common] • [Network Setting Wizard] in [Setup Wizard]
On Web Image Monitor, you...](http://img.usermanuals.tech/thumb/64/99661/w300_projector_manual_8238_d-124.png "Page 125
Network Settings Menu
This section explains the items in the Network Settings menu under the Network/USB Settings menu tab.
You can also specify and check the items in the Network Settings menu using Web Image Monitor.
However, the following items are available only on the menu screen.
• [Simple Wireless LAN Setup] and [Reset Wireless LAN Settings] in [Wireless LAN]
• [Import Device Certificate] and [Certificate List] in [LAN Common] • [Network Setting Wizard] in [Setup Wizard]
On Web Image Monitor, you...")
Network Settings Menu This section explains the items in the Network Settings menu under the Network/USB Settings menu tab. You can also specify and check the items in the Network Settings menu using Web Image Monitor. However, the following items are available only on the menu screen. • [Simple Wireless LAN Setup] and [Reset Wireless LAN Settings] in [Wireless LAN] • [Import Device Certificate] and [Certificate List] in [LAN Common] • [Network Setting Wizard] in [Setup Wizard] On Web Image Monitor, you...
Page 126
ItemDefaultIP AddressEnter the projector's IP address.0.0.0.0Subnet MaskEnter the subnet mask.0.0.0.0Default GatewayEnter the default gateway.0.0.0.0 Wireless LAN Simple Settings ItemDefaultSimple Wireless LAN SetupAcquire the wireless LAN settings registered in the access point, and specify infrastructure mode wireless LAN settings for the projector automatically. This function may not work depending on the access point.- Wireless LAN Settings ItemDefaultCommunication Mode Select the wireless LAN...
Page 127
![Page 127
ItemDefaultSSIDEnter the SSID to connect to a wireless LAN network when
[Infrastructure] is selected. Enter up to 32 characters.(blank)Channel
Select the channel to use when [Adhoc] is selected.
Select the channel that matches the type of wireless LAN being used.
The channels available might differ depending on the country. • 2.4 GHz: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 1111
Security
ItemDefaultAuthentication Method
Select the wireless LAN authentication method.• Open System
• WEP Shared Key
• WPA-PSK
•...](http://img.usermanuals.tech/thumb/64/99661/w300_projector_manual_8238_d-126.png "Page 127
ItemDefaultSSIDEnter the SSID to connect to a wireless LAN network when
[Infrastructure] is selected. Enter up to 32 characters.(blank)Channel
Select the channel to use when [Adhoc] is selected.
Select the channel that matches the type of wireless LAN being used.
The channels available might differ depending on the country. • 2.4 GHz: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 1111
Security
ItemDefaultAuthentication Method
Select the wireless LAN authentication method.• Open System
• WEP Shared Key
• WPA-PSK
•...")
ItemDefaultSSIDEnter the SSID to connect to a wireless LAN network when [Infrastructure] is selected. Enter up to 32 characters.(blank)Channel Select the channel to use when [Adhoc] is selected. Select the channel that matches the type of wireless LAN being used. The channels available might differ depending on the country. • 2.4 GHz: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 1111 Security ItemDefaultAuthentication Method Select the wireless LAN authentication method.• Open System • WEP Shared Key • WPA-PSK •...
Page 128
![Page 128
ItemDefaultTransmission WEP Key NumberSelect the key number used to authenticate and encrypt transmissions
when you select [WEP] in [Encryption Method].
• 1
• 2
• 3
• 41Network Key
Enter the WEP key when you select [WEP Shared Key] or [Open
System] in [Authentication Method] and select [WEP] in [Encryption Method].
When using 64 bit WEP, up to 10 characters can be used for hexadecimal and up to 5 characters for ASCII. When using 128 bitWEP, up to 26 characters can be used for hexadecimal and up to...](http://img.usermanuals.tech/thumb/64/99661/w300_projector_manual_8238_d-127.png "Page 128
ItemDefaultTransmission WEP Key NumberSelect the key number used to authenticate and encrypt transmissions
when you select [WEP] in [Encryption Method].
• 1
• 2
• 3
• 41Network Key
Enter the WEP key when you select [WEP Shared Key] or [Open
System] in [Authentication Method] and select [WEP] in [Encryption Method].
When using 64 bit WEP, up to 10 characters can be used for hexadecimal and up to 5 characters for ASCII. When using 128 bitWEP, up to 26 characters can be used for hexadecimal and up to...")
ItemDefaultTransmission WEP Key NumberSelect the key number used to authenticate and encrypt transmissions when you select [WEP] in [Encryption Method]. • 1 • 2 • 3 • 41Network Key Enter the WEP key when you select [WEP Shared Key] or [Open System] in [Authentication Method] and select [WEP] in [Encryption Method]. When using 64 bit WEP, up to 10 characters can be used for hexadecimal and up to 5 characters for ASCII. When using 128 bitWEP, up to 26 characters can be used for hexadecimal and up to...
Page 129
ItemDefaultDefault GatewayEnter the default gateway.0.0.0.0 Reset Wireless LAN Settings ItemDefaultReset Wireless LAN SettingsRestore all the wireless LAN settings to their defaults.- LAN Common Specify the wired LAN and wireless LAN settings. Network Interface ItemDefaultNetwork Interface Select the network interface to be used.• Wired LAN • Wireless LAN • Wired LAN Priority Give priority to wired LAN if connected to the network via anEthernet cable. Disconnect the Ethernet cable when using a wireless...
Page 130
![Page 130
ItemDefaultHost NameDisplay the projector's host name.
The [Projector Name] in [Projector ID] is used as the projector’s host
name.-Domain Name
Enter the projector's domain name. Enter up to 63 characters.(blank)
Projector Search Settings
ItemDefaultProjector SearchSpecify whether or not to search for the projector automatically whenthe projector and the device connected to the projector are on the
same network.Enable
HTTP Client Settings
ItemDefaultHTTP Proxy Server Port
Enter an HTTP proxy...](http://img.usermanuals.tech/thumb/64/99661/w300_projector_manual_8238_d-129.png "Page 130
ItemDefaultHost NameDisplay the projector's host name.
The [Projector Name] in [Projector ID] is used as the projector’s host
name.-Domain Name
Enter the projector's domain name. Enter up to 63 characters.(blank)
Projector Search Settings
ItemDefaultProjector SearchSpecify whether or not to search for the projector automatically whenthe projector and the device connected to the projector are on the
same network.Enable
HTTP Client Settings
ItemDefaultHTTP Proxy Server Port
Enter an HTTP proxy...")
ItemDefaultHost NameDisplay the projector's host name. The [Projector Name] in [Projector ID] is used as the projector’s host name.-Domain Name Enter the projector's domain name. Enter up to 63 characters.(blank) Projector Search Settings ItemDefaultProjector SearchSpecify whether or not to search for the projector automatically whenthe projector and the device connected to the projector are on the same network.Enable HTTP Client Settings ItemDefaultHTTP Proxy Server Port Enter an HTTP proxy...