Ricoh Projector PJ WX4141N User Manual

Manage CertificateItemDefaultImport Device CertificateImport the device certificate saved on the USB memory device to the
projector.
Insert the USB memory device into the USB port on the projector to display the file list. Select the device certificate to be imported fromthe file list.-Certificate List
The list of device certificates is displayed. You can confirm details
about the device certificate or delete it in this screen.-
Projector ID
ItemDefaultProjector Name
Enter an ID to identify the projector...

Setup WizardItemDefaultNetwork Setting WizardOpen Network Setting Wizard. For details about Network Setting
Wizard, see page 67 "Connecting the Projector to a Network".-
Display Status
Wired LAN
ItemDefaultCurrent wired LAN settings are displayed. You can confirm the following
items:
Connection Status, MAC Address, Transmission Speed, IP Address,
Subnet Mask, Default Gateway-
Wireless LAN
ItemDefaultCurrent wireless LAN settings are displayed. You can confirm the following
items:
Connection...

Network Application Settings Menu
This section explains the items in the Network Application Settings menu under the Network/USB
Settings menu tab.
You can also specify and check the items in the Network Application Settings menu using Web Image
Monitor. However, the following items are available only on the menu screen.
• [Crestron WebUI User Auth.], [Crestron WebUI User Password], [Crestron WebUI Admin. Auth.], [Crestron WebUI Admin. Password], [Control System IP Address], [Control System IP ID], and...

Crestron RoomViewItemDefaultCrestron RoomViewSpecify whether or not to allow the projector to be controlled and
monitored by Crestron RoomView. For details about Crestron
RoomView, see page 162 "Controlling and Monitoring the Projector Using Crestron RoomView".DisableCrestron WebUI User Auth.
Specify whether or not to restrict access to Crestron WebUI with a
password.OffCrestron WebUI User Password
Enter the password for Crestron WebUI user authentication up to 26
characters.(blank)Crestron WebUI...

ItemDefaultPJLink PasswordEnter a password used when setting the PJLink authentication that is
up to 32 characters.(blank)
Security
ItemDefaultAdministrator Authentication
Specify whether or not to set administrator authentication. A administrator
password is required to change this setting.
If administrator authentication is set, a password is required for the
following operations:
• Changing [Transmission WEP Key Number], [Network Key], [Crestron WebUI User Auth.], [Crestron WebUI User Password],...

Server
Remote Projection Control
ItemDefaultRemote Projection ControlSpecify whether or not to enable the Remote Projection Control
function. The Remote Projection Control function allows you to project images from a tablet computer or a smartphone via a network.
For details about how to project images using this function, see
page 81 "Projecting Images Using DLNA-Compatible Devices".Enable
Projection Server Settings
ItemDefaultServer URL
Enter the root URL of the server on which the files to be...

Still ImageItemDefaultDisplay EffectSelect the display effect for switching the image.• None
• Push The current image is pushed off by the next image.
• Wipe The current image is wiped off by the next image.
• Fade The current image fades out and the next image fades in.NoneDisplay Interval (sec.)
Enter the slide show switching interval from 5 to 999 seconds.5 seconds
Moving Image
ItemDefaultRepeat Specify whether or not to repeat video playback.OffDLNA Certification ModeSpecify whether the projector...

Firmware Update
The following items are available only for users who sign up for the @Remote service.
ItemDefault@Remote: Notify Firmware UpdateSpecify whether or not to display a message for firmware update
notification.Yes@Remote: Firmware Updating
Execute firmware update via the @Remote service.-
Display Status
PJLink
ItemDefaultPJLink Class Display the PJLink class.-
Firmware Version
ItemDefaultNetwork/USB Func. Firmware VersionDisplay the firmware version of the network and USB functions.-Energy...

Display StatusItemInputDisplays the selected input signals.ResolutionDisplays the resolution.
This item appears when you select [Computer] or [HDMI] as an input signal.Frequency
Displays the synchronous frequency.
This item appears when you select [Computer] or [HDMI] as an input signal.Sync
Displays the synchronous signal polarity.
This item appears when you select [Computer] as an input signal.Signal Format
Displays the Y/Pb/Pr signal format.
This item appears when you select [Y/Pb/Pr] or [HDMI]...

ItemCurrent TimeDisplays the current time if you specify [Current Time] in [Default Settings 2].Main FW VersionDisplays the version of the firmware on the main board.Interactive Version (RICOH PJ WX4141NI only) Displays the version of the interactive function.7. Changing the Projector Settings
138