Ricoh Projector PJ WX4141N User Manual

StepCheck itemSolutions8Check to see whether the
battery of the electronic pen
is out of charge.When the power switch on the electronic pen is turned on,
the communication indicator on the electronic pen flickers. If
the indicator fails to flicker, check that a rechargeable battery is installed in the electronic pen. If a rechargeable
battery is installed, recharge it. For details, see page 95
"Installing a Rechargeable Battery into the Electronic Pen"
and page 97 "Recharging the Electronic...

When the Projected Screen Cannot Be
Operated As Wanted
This section explains what to do when the projected screen cannot be operated as wanted.ProblemSolutionsThe location the pen nib points at does not
correspond with what is displayed on the screen.• Change the display settings using the computer's graphic driver, so that the screen
projected is not scaled by the computer.
(Example: Display > General Settings >
Scaling > Maintain Display Scaling)
• Change the computer output settings so that only...

7. Changing the Projector Settings
This chapter explains the settings on the menu screen and how to change the settings.
Viewing the Menu Screen
1. Image Adjustment menu tab Adjusts the settings for the projected image, such as contrast and brightness.For the Image Adjustment menu settings, see page 106 "Image Adjustment Menu".
2. Display/Sound Settings menu tab Specifies the settings for image display and sound, such as auto keystone correction and sound quality.
For the Display/Sound Settings...

4. Default Settings 1 menu tabSpecifies the settings for the beep sound, user logo, etc.
For the Default Settings 1 menu settings, see page 116 "Default Settings 1 Menu".
5. Default Settings 2 menu tab Specifies the settings for the display language, startup password, etc.For the Default Settings 2 menu settings, see page 118 "Default Settings 2 Menu".
6. Network/USB Settings menu tab The Network/USB Settings menu tab includes the USB Settings menu, Network Settings menu, and Network...

Changing the Settings1. Press the [Menu] button.
2.Select the menu tab using the [] and [] buttons.
If you select the Display Status tab, you can confirm the information in this step.
3. Press the [
] button.
4. Select the item to be changed using the [
] and [] buttons.
5. Press the [Enter] button.
If [To settings] is displayed on the right, the item has a submenu. Select an item on the submenu, and then press the [Enter] button.
If [Execute] is displayed to the right of the item you select, the...

• Inputting numbersUse the number buttons on the remote control to input numbers.
• Inputting text Use the keyboard that is displayed on screen to input text. You can also use the number
buttons on the remote control to input numbers.
7. If a confirmation screen appears, select [OK], and then press the [Enter] button.
8. Press the [Menu] button.
9. If a confirmation screen appears, select [Reflect], and then press the [Enter] button.
• The Network/USB Settings menu tab includes the USB Settings menu,...

Restoring All the Settings to Their Defaults1. Press the [Menu] button.
2.Select [Default Settings 2], and then press the [] button.
3. Select [Reset All], and then press the [Enter] button.
4.Select [OK] in the confirm screen, and then press the [Enter] button.
• The start menu is displayed after [Reset All] is executed. For details about the start menu, see
page 36 "When the start menu is displayed".
• The following settings cannot be reset with this function: • [User Logo] in [Default Settings...

Image Adjustment MenuItemDefaultPicture ModeSelect the picture mode.
This function is not available when you select [On] in [3D Projection]
under [Display/Sound Settings] or [On] in [Interactive Mode] under
[Default Settings 1].
• Bright This image mode makes it easier to see the projection in bright
locations.
• Standard This is the standard image mode.
• Photo Photos appear more natural in this mode.
• Video Video is smoother in this mode.
• DICOM Sim. Mode In this image mode, the images are adjusted...

ItemDefaultR-levelAdjust the level of red in the image. The greater the value, the stronger the
color red is in the image.0G-level
Adjust the level of green in the image. The greater the value, the strongerthe color green is in the image.0B-level
Adjust the level of blue in the image. The greater the value, the strongerthe color blue is in the image.0Color Saturation
Adjust the color saturation of the image. The greater the value, the richerthe image.
This function is available when you select [Y/Pb/Pr]...

ItemDefaultRGB Input RangeSelect the RGB input range.
This function is available when you select [HDMI] (RGB signals) as an
input signal.
• Auto The projector switches RGB input range according to the settings of
the connected equipment.
• Standard Select this mode when the color black in the image is light.
• Full Select this mode when dark parts in the image are too dark.AutoAuto Set Signals
Automatically adjust the items in [Detailed Signal Settings].
This function is available when you select...