Ricoh Projector PJ WX4141N User Manual

ItemDefaultDetailed Signal Settings > Clamp Pulse 2Adjust the clamp pulse width.
This function is available when you select [Computer] as an input signal.0 to 255 *1
*1
The default of [Phase], [Clamp Pulse 1], and [Clamp Pulse 2] is variable because the projector automatically
adjusts these settings according to the input signal.
Image Adjustment Menu
109  

Display/Sound Settings MenuItemDefaultAuto KeystoneSpecify whether or not to implement keystone correction automatically
depending on the angle of the projector's position.OnKeystone
Adjust for keystone distortion.To decrease the width of the bottom of the projected image, decrease the
value. To decrease the width of the top of the projected image, increase
the value.0Zoom
Reduce the size of the image if the projected image is larger than the
screen. The image can be reduced in a range of 80 to 100%...

ItemDefaultAspectSelect the aspect ratio of the image.
This function is not available when you select [USB Memory] or [Server] as an input signal. When you select [Network PC] as an input signal, this
function is available only while you are projecting a computer's screen
using QuickProjection.
• Normal Display in full screen without changing the input signal aspect ratio.
• 16:9 Display using 16:9 aspect ratio (1280 × 720 resolution).
• Full Display using 1280 × 800 resolution.
• Native Display the...

ItemDefaultWall Color ModeSelect the image hue according to the projection surface when the image
is being projected on something other than a screen.
• Off
• Whiteboard
• Beige
• Gray
• Blackboard (Green)Off3D Projection > 3D Projection
Specify whether or not to use 3D projection.
The image will be slightly darker if this is set to [On].
3D projection and interactive mode cannot be enabled simultaneously. If you change this setting to [On], [Interactive Mode] in [Default Settings 1]
is switched to...

ItemDefaultClosed CaptionThe projector supports closed captioning, which allows subtitles to be
displayed at the bottom of the picture. This is pursuant to the regulations
set forth by the US Federal Communications Commission (FCC).
Select [CC-1] to [CC-4] to display the dialogue and narration of TV
programs and videos that are closed captioned.
This function is available when you select [Video] as an input signal. • Off
• CC-1
• CC-2
• CC-3
• CC-4OffSound Quality
Select the sound quality of the audio...

Energy Saving Settings MenuItemDefaultLamp PowerSelect the lamp power level.
To save energy, select the eco mode. To make images brighter, select
the standard mode.
The lamp power is switched to the standard mode regardless of this setting when [DICOM Sim. Mode], [3D Projection], or [InteractiveMode] is enabled.
• Eco
• Stnd.Stnd.Lamp Pwr on No Signal
Specify whether or not to lower the lamp power when there is no input
signal. If you select [Eco], the projector lowers the lamp power thirty
seconds after...

ItemDefaultPower on StandbySpecify whether or not to save energy while in standby.• Eco You can save energy while in standby, but start-up time is slower.
• Q'ck On You can turn on the projector quickly, but the standby energy level
is higher.EcoNW Settings on Standby
Select a network function to be enabled while in standby. You can save
energy by disabling the network function.
This function is available when you select [Eco] in [Power on Standby]. • Do not Use Disable the wired LAN and the wireless...

Default Settings 1 MenuItemDefaultAuto Input SearchSpecify whether or not to switch to another input signal that the projector
detects when you press the [Input] button.OnBeep
Specify whether or not to beep during use.OnBackground on No SignalSelect the image display when there is no input signal.• Logo
• Blue
• NoneLogoDisplay Guidance
Specify whether or not to display the guidance for operating the
projector.OnStart-up Screen
Specify whether or not to display the start-up screen when the projector...

ItemDefaultInteractive > Interactive Mode (RICOH PJ WX4141NI only)Specify whether or not to enable the interactive mode. For details about
the interactive mode, see page 83 "Using the Interactive Function
(RICOH PJ WX4141NI only)".
The interactive mode and 3D projection cannot be enabled
simultaneously. If you change this setting to [On], [3D Projection] in [Display/Sound Settings] is switched to [Off].OffInteractive > PC Adapter Registration (RICOH PJ WX4141NI only)
Register the computer USB...

Default Settings 2 MenuItemDefaultLanguageSelect the display language.
Available languages are as follows:
English, Japanese, Spanish, Russian, French, Portuguese, German, Italian, Dutch, Polish, Czech, Swedish, Finnish, Hungarian, Norwegian,
Danish, Romanian, Greek, Turkish, Arabic, Thai, Indonesian, Simplified
Chinese, Traditional Chinese, Korean.EnglishPower Timer > Current Time
Specify the current time and day of the week.Sun. 0:00Power Timer > Power TimerSpecify whether or not to enable the power...