Ricoh Projector PJ WX4141N User Manual
Have a look at the manual Ricoh Projector PJ WX4141N User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 127 Ricoh manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 127
ItemDefaultSSIDEnter the SSID to connect to a wireless LAN network when
[Infrastructure] is selected. Enter up to 32 characters.(blank)Channel
Select the channel to use when [Adhoc] is selected.
Select the channel that matches the type of wireless LAN being used.
The channels available might differ depending on the country. • 2.4 GHz: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 1111
Security
ItemDefaultAuthentication Method
Select the wireless LAN authentication method.• Open System
• WEP Shared Key
• WPA-PSK
•...](http://img.usermanuals.tech/thumb/64/99661/w64_projector_manual_8238_d-126.png "Page 127
ItemDefaultSSIDEnter the SSID to connect to a wireless LAN network when
[Infrastructure] is selected. Enter up to 32 characters.(blank)Channel
Select the channel to use when [Adhoc] is selected.
Select the channel that matches the type of wireless LAN being used.
The channels available might differ depending on the country. • 2.4 GHz: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 1111
Security
ItemDefaultAuthentication Method
Select the wireless LAN authentication method.• Open System
• WEP Shared Key
• WPA-PSK
•...")
![Page 128
ItemDefaultTransmission WEP Key NumberSelect the key number used to authenticate and encrypt transmissions
when you select [WEP] in [Encryption Method].
• 1
• 2
• 3
• 41Network Key
Enter the WEP key when you select [WEP Shared Key] or [Open
System] in [Authentication Method] and select [WEP] in [Encryption Method].
When using 64 bit WEP, up to 10 characters can be used for hexadecimal and up to 5 characters for ASCII. When using 128 bitWEP, up to 26 characters can be used for hexadecimal and up to...](http://img.usermanuals.tech/thumb/64/99661/w64_projector_manual_8238_d-127.png "Page 128
ItemDefaultTransmission WEP Key NumberSelect the key number used to authenticate and encrypt transmissions
when you select [WEP] in [Encryption Method].
• 1
• 2
• 3
• 41Network Key
Enter the WEP key when you select [WEP Shared Key] or [Open
System] in [Authentication Method] and select [WEP] in [Encryption Method].
When using 64 bit WEP, up to 10 characters can be used for hexadecimal and up to 5 characters for ASCII. When using 128 bitWEP, up to 26 characters can be used for hexadecimal and up to...")
![Page 130
ItemDefaultHost NameDisplay the projector's host name.
The [Projector Name] in [Projector ID] is used as the projector’s host
name.-Domain Name
Enter the projector's domain name. Enter up to 63 characters.(blank)
Projector Search Settings
ItemDefaultProjector SearchSpecify whether or not to search for the projector automatically whenthe projector and the device connected to the projector are on the
same network.Enable
HTTP Client Settings
ItemDefaultHTTP Proxy Server Port
Enter an HTTP proxy...](http://img.usermanuals.tech/thumb/64/99661/w64_projector_manual_8238_d-129.png "Page 130
ItemDefaultHost NameDisplay the projector's host name.
The [Projector Name] in [Projector ID] is used as the projector’s host
name.-Domain Name
Enter the projector's domain name. Enter up to 63 characters.(blank)
Projector Search Settings
ItemDefaultProjector SearchSpecify whether or not to search for the projector automatically whenthe projector and the device connected to the projector are on the
same network.Enable
HTTP Client Settings
ItemDefaultHTTP Proxy Server Port
Enter an HTTP proxy...")
![Page 133
Network Application Settings Menu
This section explains the items in the Network Application Settings menu under the Network/USB
Settings menu tab.
You can also specify and check the items in the Network Application Settings menu using Web Image
Monitor. However, the following items are available only on the menu screen.
• [Crestron WebUI User Auth.], [Crestron WebUI User Password], [Crestron WebUI Admin. Auth.], [Crestron WebUI Admin. Password], [Control System IP Address], [Control System IP ID], and...](http://img.usermanuals.tech/thumb/64/99661/w64_projector_manual_8238_d-132.png "Page 133
Network Application Settings Menu
This section explains the items in the Network Application Settings menu under the Network/USB
Settings menu tab.
You can also specify and check the items in the Network Application Settings menu using Web Image
Monitor. However, the following items are available only on the menu screen.
• [Crestron WebUI User Auth.], [Crestron WebUI User Password], [Crestron WebUI Admin. Auth.], [Crestron WebUI Admin. Password], [Control System IP Address], [Control System IP ID], and...")
![Page 135
ItemDefaultPJLink PasswordEnter a password used when setting the PJLink authentication that is
up to 32 characters.(blank)
Security
ItemDefaultAdministrator Authentication
Specify whether or not to set administrator authentication. A administrator
password is required to change this setting.
If administrator authentication is set, a password is required for the
following operations:
• Changing [Transmission WEP Key Number], [Network Key], [Crestron WebUI User Auth.], [Crestron WebUI User Password],...](http://img.usermanuals.tech/thumb/64/99661/w64_projector_manual_8238_d-134.png "Page 135
ItemDefaultPJLink PasswordEnter a password used when setting the PJLink authentication that is
up to 32 characters.(blank)
Security
ItemDefaultAdministrator Authentication
Specify whether or not to set administrator authentication. A administrator
password is required to change this setting.
If administrator authentication is set, a password is required for the
following operations:
• Changing [Transmission WEP Key Number], [Network Key], [Crestron WebUI User Auth.], [Crestron WebUI User Password],...")
Manage CertificateItemDefaultImport Device CertificateImport the device certificate saved on the USB memory device to the projector. Insert the USB memory device into the USB port on the projector to display the file list. Select the device certificate to be imported fromthe file list.-Certificate List The list of device certificates is displayed. You can confirm details about the device certificate or delete it in this screen.- Projector ID ItemDefaultProjector Name Enter an ID to identify the projector on the network. Enter up to 16 characters. You can use alphanumeric characters, hyphens, and periods for projector names. Only a letter can be used for the first character of the projector's name. Hyphens and periods cannot be entered consecutively and cannot be used for the last character of the projector's name.RPJxxxxxx *1Identification Code Enter the 4-digit identification code for connecting the projector and the computer using QuickProjection.0000 to 9999 *2 *1 xxxxxx is the last six digits of the wired LAN's MAC address. *2 Each projector has a unique identification code as the default setting. Network Settings Menu 129
Setup WizardItemDefaultNetwork Setting WizardOpen Network Setting Wizard. For details about Network Setting Wizard, see page 67 "Connecting the Projector to a Network".- Display Status Wired LAN ItemDefaultCurrent wired LAN settings are displayed. You can confirm the following items: Connection Status, MAC Address, Transmission Speed, IP Address, Subnet Mask, Default Gateway- Wireless LAN ItemDefaultCurrent wireless LAN settings are displayed. You can confirm the following items: Connection Status, Radio Field Intensity, MAC Address, Access Point BSSID, Communication Mode, Transmission Speed, Channel, SSID, Authentication Method, Encryption Method, IP Address, Subnet Mask, Default Gateway- Firmware Version ItemDefaultNetwork/USB Func. Firmware Version Display the firmware version of the network and USB functions.-Energy Saving IO Firmware Version Display the energy-saving IO firmware version.-7. Changing the Projector Settings 130
Network Application Settings Menu This section explains the items in the Network Application Settings menu under the Network/USB Settings menu tab. You can also specify and check the items in the Network Application Settings menu using Web Image Monitor. However, the following items are available only on the menu screen. • [Crestron WebUI User Auth.], [Crestron WebUI User Password], [Crestron WebUI Admin. Auth.], [Crestron WebUI Admin. Password], [Control System IP Address], [Control System IP ID], and [Control System Port] in [Administration Tools] • [DLNA Certification Mode] in [Server] • [@Remote: Firmware Updating] in [Firmware Update] On Web Image Monitor, you can check [Network/USB Func. Firmware Version] and [Energy Saving IO Firmware Version] on the top page. For details about Web Image Monitor, see page 159 "Managing the Projector Using Web Image Monitor". Administration Tools Web Image Monitor ItemDefaultWeb Image Monitor Specify whether or not to allow the projector settings to be changed and checked using a web browser. To enable this setting, you must restart Web Image Monitor after making the change. For details about Web Image Monitor, see page 159 "Managing the Projector Using Web Image Monitor".Enable AMX Device Discovery ItemDefaultAMX Device Discovery Specify whether or not to allow the projector to be controlled and monitored by AMX Device Discovery. To use this function, an AMX controller is required in your network environment. For details about AMX Device Discovery, see the AMX LLC website.DisableNetwork Application Settings Menu 131
Crestron RoomViewItemDefaultCrestron RoomViewSpecify whether or not to allow the projector to be controlled and monitored by Crestron RoomView. For details about Crestron RoomView, see page 162 "Controlling and Monitoring the Projector Using Crestron RoomView".DisableCrestron WebUI User Auth. Specify whether or not to restrict access to Crestron WebUI with a password.OffCrestron WebUI User Password Enter the password for Crestron WebUI user authentication up to 26 characters.(blank)Crestron WebUI Admin. Auth. Specify whether or not to restrict access to the tools screen on Crestron WebUI with a password.OffCrestron WebUI Admin. Password Enter the password for Crestron WebUI administrator authenticationup to 26 characters.(blank)Control System IP Address Enter the IP address of Crestron Control System.0.0.0.0Control System IP IDEnter the IP ID to connect to Crestron Control System.3Control System PortEnter the port number for communicating to Crestron Control System.41794 PJLink ItemDefaultPJLink Authentication Specify whether or not to set PJLink authentication.Off7. Changing the Projector Settings 132
ItemDefaultPJLink PasswordEnter a password used when setting the PJLink authentication that is up to 32 characters.(blank) Security ItemDefaultAdministrator Authentication Specify whether or not to set administrator authentication. A administrator password is required to change this setting. If administrator authentication is set, a password is required for the following operations: • Changing [Transmission WEP Key Number], [Network Key], [Crestron WebUI User Auth.], [Crestron WebUI User Password], [Crestron WebUI Admin. Auth.], [Crestron WebUI Admin. Password], [PJLink Authentication], and [PJLink Password] • Using the simple wireless LAN setup function and the [Network Setting Wizard] screen • Importing or deleting device certificates • Executing [@Remote: Firmware Updating] • Turning the projector on or off via a network • Changing the settings using Web Image MonitorOffAdministrator Password Enter the administrator password up to 32 characters. The currentpassword is required to change the administrator password.(blank)Network Application Settings Menu 133
Server Remote Projection Control ItemDefaultRemote Projection ControlSpecify whether or not to enable the Remote Projection Control function. The Remote Projection Control function allows you to project images from a tablet computer or a smartphone via a network. For details about how to project images using this function, see page 81 "Projecting Images Using DLNA-Compatible Devices".Enable Projection Server Settings ItemDefaultServer URL Enter the root URL of the server on which the files to be projected using the projection server functions are saved. Enter up to 128 characters.(blank)Index File Enter the name of the index file on the projection server. Enter up to31 characters.(blank)HTTP Proxy Server Usage Specify whether or not to use a proxy server.NoAccess Restriction Type Specify whether or not to display the access number input screen when you access the projection server. Select [Access No.] if access to the projection server is restricted by an access number. • None • Access No.None7. Changing the Projector Settings 134
Still ImageItemDefaultDisplay EffectSelect the display effect for switching the image.• None • Push The current image is pushed off by the next image. • Wipe The current image is wiped off by the next image. • Fade The current image fades out and the next image fades in.NoneDisplay Interval (sec.) Enter the slide show switching interval from 5 to 999 seconds.5 seconds Moving Image ItemDefaultRepeat Specify whether or not to repeat video playback.OffDLNA Certification ModeSpecify whether the projector works as a DLNA-certified device. The projector is certified to DLNA 1.5 guidelines for still images. For details about the supported file types, see page 75 "Using the Server Function". • Enable The projector works as a DLNA-certified device. Of the video files sent from the DLNA server, those files that are not DLNA compatible are shown on the file list of the Server Projection screen. • Disable The projector works according to its own specifications. It does not work as a DLNA-certified device. All the video files delivered from the DLNA server appear in the file list of the ServerProjection screen.DisableNetwork Application Settings Menu 135
Firmware Update The following items are available only for users who sign up for the @Remote service. ItemDefault@Remote: Notify Firmware UpdateSpecify whether or not to display a message for firmware update notification.Yes@Remote: Firmware Updating Execute firmware update via the @Remote service.- Display Status PJLink ItemDefaultPJLink Class Display the PJLink class.- Firmware Version ItemDefaultNetwork/USB Func. Firmware VersionDisplay the firmware version of the network and USB functions.-Energy Saving IO Firmware VersionDisplay the energy-saving IO firmware version.-7. Changing the Projector Settings 136
Display StatusItemInputDisplays the selected input signals.ResolutionDisplays the resolution. This item appears when you select [Computer] or [HDMI] as an input signal.Frequency Displays the synchronous frequency. This item appears when you select [Computer] or [HDMI] as an input signal.Sync Displays the synchronous signal polarity. This item appears when you select [Computer] as an input signal.Signal Format Displays the Y/Pb/Pr signal format. This item appears when you select [Y/Pb/Pr] or [HDMI] (Y/Pb/Pr signals) as an input signal.Video Mode Displays the video signal color format. This item appears when you select [Video] as an input signal.Lamp Time Displays the lamp usage time.Lamp Reset CountDisplays the number of lamp replacements.Total TimeDisplays the projector usage time.Total CO2 ReductionDisplays the total reduction in CO 2 caused by setting the lamp to the eco mode.Eco Time Ratio Displays the ratio of the time eco mode was used to the total use time.Display Status 137
ItemCurrent TimeDisplays the current time if you specify [Current Time] in [Default Settings 2].Main FW VersionDisplays the version of the firmware on the main board.Interactive Version (RICOH PJ WX4141NI only) Displays the version of the interactive function.7. Changing the Projector Settings 138