Ricoh Projector PJ WX4141N User Manual
Have a look at the manual Ricoh Projector PJ WX4141N User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 127 Ricoh manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
5.Turn the power switch of the electronic pen to "On". The communication indicator on the electronic pen will then flicker. If the communication indicator fails to flicker, check that the rechargeable battery is installed in the electronic pen. If a battery is installed, recharge it. For about the electronic pen, see page 92 "Using the Electronic Pen". 6. Point the pen nib toward the projected screen. • If registration succeeds The projected computer screen pointer moves according to the movements of the electronic pen. Also, the communication indicator on the electronic pen lights up or flickers green rapidly and the computer USB adapter lights up. • If registration fails • Check how you are holding the electronic pen. If you are holding the top or the bottomof the pen, the projector is unable to recognize the electronic pen correctly. To hold the electronic pen correctly, see page 93 "How to Use the Electronic Pen". • Check that the pen nib is not pointing at a shadow. If the pen nib is pointing at a shadow or if it is not pointing at the screen, then the projector is unable to recognize theelectronic pen correctly. To operate the electronic pen correctly, see page 93 "How to Use the Electronic Pen". Preparations for Using the Interactive Function 89CWD011 CZE028
• If the electronic pen is not recognized correctly after the direction of the pen is correctedor even when you hold the electronic pen correctly, check the procedure from Step 1 by referring to page 98 "When You Cannot Use the Interactive Function". Installing RICOH PJ Interactive Software RICOH PJ Interactive Software allows you to write and draw on a projection screen. When you use RICOH PJ Interactive Software, install it on a computer. For details about how to use RICOH PJ Interactive Software, see Operating Instructions (Interactive Function). The following operating environment is required to use RICOH PJ Interactive Software. ItemSpecificationsCPU• Intel ® Core TM 2 Duo 2 GHz or more recommended (Minimum: Intel Core Solo U1300)Memory• Windows XP: 2 GB or more recommended (Minimum: 512 MB) • Windows 7 / 8 (32 bit): 3 GB or more recommended (Minimum: 1 GB) • Windows 7 / 8 (64 bit): 4 GB or more recommended (Minimum: 2 GB)HDD• 9 GB or more free space recommended (Minimum: 2 GB)Operating System• Windows XP Home / Professional SP3 or later (32 bit) • Windows 7 Home Premium / Professional / Ultimate / Enterprise SP1 or later (32 bit / 64 bit) • Windows 8 / Pro / Enterprise (32 bit / 64 bit) • To install RICOH PJ Interactive Software on a computer, log on as a user with administrator privileges. 1. Insert the CD-ROM in the CD-ROM drive of your computer. 2. Specify a language and model name, and then click [Select]. 3. Click [PJ Interactive Software]. 4. Select the language for the installation, and then click [OK]. 5. If .NET Framework 4 is not installed on your computer, click [Install]. If .NET Framework 4 has already been installed, the message [Install] does not appear. Proceed to the next step. 6. Click [Next]. 6. Using the Interactive Function (RICOH PJ WX4141NI only) 90
7.Select "I accept the terms in the license agreement", and then click [Next]. 8. Specify the installation folder, and then click [Next]. 9. Click [Install]. 10. Click [Finish]. • If the [User Account Control] dialog box appears during the installation procedure, click [Yes] or [Continue]. • To uninstall RICOH PJ Interactive Software, use the program delete function in [Control Panel] to delete "RICOH PJ Interactive Software". Preparations for Using the Interactive Function 91
Using the Electronic Pen This section introduces the names of the parts of the electronic pen and explains how to charge it. After you finish setting up the interactive function, insert the computer USB adapter into the computer. After the computer recognizes the electronic pen, you can use it to perform operations on the projected screen. For details about the electronic pen, see page 88 "Enabling the Projector to Recognize the Electronic Pen". Communication between the electronic pen, the projector, and the computer USB adapter is conducted wirelessly. Do not block the area between the electronic pen, projector, and computer. In addition, do not use wireless devices near the electronic pen. Otherwise, the position of the electronic pen will not be recognized correctly. Electronic Pen Parts and Their Functions 1. Pen nib switch Used to write, draw, and select operations on the projected screen. This switch is functionally equivalent to theleft button of a computer mouse. 2. Left button Similar to the left button of a computer mouse. 3. Right button Similar to the right button of a computer mouse. 4. Point adjustment button Used to adjust the point position of the pen nib when the pen is held in a different way. The standard position of the point is the center of the pen, and it moves each time this button is pressed. The order in which the point moves is as follows: up, down, and to the center. 5. Battery indicator Indicates the battery status of the electronic pen. The battery indicator keeps lighting while charging and goes off when the charge is completed. 6. Communication indicator Indicates the communication status of the electronic pen. This indicator flickers in red until the projector recognizes the electronic pen. 6. Using the Interactive Function (RICOH PJ WX4141NI only) 92CWD008 1 2 3 4 5 6 7 8
When the projector recognizes the electronic pen, the indicator lights up in green or flickers rapidly. 7. USB connecter Used to connect the electronic pen charge cable. See page 97 "Recharging the Electronic Pen". 8. Power switch Switches the power of the electronic pen between on and off. How to Use the Electronic Pen When the pen nib is pointed toward the screen projected by the projector in Interactive Mode, the electronic pen is recognized and the pointer on the projected computer screen can be operated with the electronic pen. See page 88 "Enabling the Projector to Recognize the Electronic Pen". You can operate the computer projection screen by touching it with the pen nib—you can select an icon or menu, or write and draw. You may also touch the pen nib twice on the same position of the screen, much like the double-click of a mouse. • Operate the electronic pen so that the pen nib does not point toward a shadowed area. When the projector is installed on a table or the floor Hold the electronic pen as shown below. If the nib or bottom of the electronic pen is held, the position of the electronic pen will not be recognized correctly. Using the Electronic Pen 93 CWD014 CZD017
To align the point position of the electronic pen with the pen nib switch, and not the center of the pen, use the point adjustment button to move the point position up. When the projector is installed on a wall or ceiling When the projector is installed on a wall or ceiling, hold the electronic pen upside down to eliminate the shadow that appears on the screen. To align the point position with the pen nib switch while holding the electronic pen upside down, use the point adjustment button to move the point position down. Operating the electronic pen remotely You can also operate the screen remotely. When standing away from the screen, use the mouse button on the electronic pen. 6. Using the Interactive Function (RICOH PJ WX4141NI only) 94CWD030 CWD024 CWD032
• The electronic pen can only be used while the projector is in Interactive Mode. For details abouthow to configure the projector, see page 84 "Enabling Interactive Mode". Installing a Rechargeable Battery into the Electronic Pen • For safe operation, follow the warnings below regarding the batteries. If you use the batteries incorrectly, it may result in fire or injury due to batteries leaking or exploding. • Do not use batteries other than the ones specified. • Do not mix and use batteries that are different types or that are new and old. • Correctly insert batteries according to the polarity ( / ). • Do not charge non-rechargeable batteries. • Do not heat or throw the batteries into fire or water. • Do not connect the positive and negative terminals on a battery with a wire. • Remove the batteries that are past their suggested use period or that are depleted. • Remove the batteries when they will not be used for extended periods. • Keep the batteries out of the reach of children. Children may swallow or choke on the batteries. If this happens, contact a doctor immediately. Using the Electronic Pen 95CZE127
1.Check the electronic pen to make sure that the power is off. 2.Push down A and slide the battery cover to remove it. 3.Install a battery. Check that the battery has been installed in the right direction. 6. Using the Interactive Function (RICOH PJ WX4141NI only) 96CWD029 A CWD025 CWD026
4.Re-install the battery cover. • For details about what to do if a battery has leaked, see page 147 "Operating Precautions". Recharging the Electronic Pen Insert an electronic pen charge cable into a USB port on the computer and connect the electronic pen. The battery indicator keeps lighting while charging and goes off when the charge is completed. Using the Electronic Pen 97CWD027 CWD009
When You Cannot Use the Interactive Function If you cannot use the interactive function, follow the steps below in the specified order to troubleshoot the problem.StepCheck itemSolutions1Check the projector to make sure that power is supplied to it.If the projector is not supplied with power, check the power cord for connection and turn on the power. To connect the cord and turn on the power correctly, see page 35 "Turning On the Projector".2Check to see whether the projector is in Interactive Mode.If Interactive Mode is set to [Off], switch it to [On]. For details about how to check whether the projector is in Interactive Mode, as well as how to specify the mode, see page 84 "Enabling Interactive Mode".3Check to see whether the computer USB adapter is connected to in the computer.If the computer USB connector is not connected, connect it to one of the USB ports on the computer.4Check to see whether the computer USB adapter inserted in the computer is registered to the projector.When registered, the computer USB adapter flickers once every 0.5 seconds. Then, when the projector and the computer USB adapter are recognized, the adapter flickers once every two seconds. If the adapter flickers twice every 0.5 seconds, the projector needs registering. To register it correctly, see page 85 "Registering the Computer USB Adapter".5Check that the computer is connected to the projector using RGB cables or an HDMI cable.The interactive function becomes inoperable if anything other than RGB cables or an HDMI cable is used. To connect these correctly, see the page 30 "Connecting to the RGB out port" or page 30 "Connecting to the HDMI port".6Check that the computer screen is projected on the projector screen.The electronic pen is not recognized unless the computer screen is projected. To project the screen correctly, see page 36 "Projecting an Image".7Check to see whether the power switch of the electronic pen is set to "On".If the power switch of the electronic pen is set to "Off", turn it to "On". For details about the location of the power switch of the electronic pen, see page 92 "Electronic Pen Parts and Their Functions".6. Using the Interactive Function (RICOH PJ WX4141NI only) 98