Ricoh Projector PJ WX4141N User Manual

							If [Access Restriction Type] in [Network Application Settings] is specified as [Access No.], theaccess number input screen is displayed after the projection server is selected. Contact your server
administrator for your access number.
If [DLNA Certification Mode] in [Network Application Settings] is specified as [Enable], some
video files do not appear in the file list. For details, see page 131 "Network Application Settings
Menu".
4. Select the file, [Slideshow], or folder, and then press the [Enter] button.
• When a file is selected If you select a JPEG file, its image is projected. If you select an MPEG file, the video plays.
• When [Slideshow] is selected A slide show starts with the files in the current folder.
• When a folder is selected The file list within the folder is displayed. Repeat this step until the file you want to project is
displayed.
• Images are displayed in the numerical and alphabetical order of their file name headers.
• You can specify the slide show switching interval for still images in [Display Interval (sec.)] in [Server] under [Network Application Settings].
• If a video file is in a folder that has been selected for a slide show, the entire video plays. When the video finishes, the next file is displayed.
Controlling the projected image
How to control a still image • [Enter] button: Starts the slide show from the projected image. Stops the slide show that is inprogress.
• [
] button: Displays the next image.
• [
] button: Displays the previous image.
• [
] button: Rotates the image 90° to the right.
• [
] button: Rotates the image 90° to the left.
• [Menu] button: Returns to the file list screen.
How to control a video
• [Enter] button: Pauses or restarts the video.
• [
] button: Fast forwards the video. If a video is paused, displays the next image.
• [
] button: Rewinds the video. If a video is paused, displays the previous image.
• [
] button: Increases the volume.
Using the Server Function
79          
						

							• [] button: Decreases the volume.
• [Menu] button: Returns to the file list screen.
• The rewind and fast forward speed increases three levels each time the button is pressed. To reduce the speed to its original, press the [Enter] button.
• If any operation except for volume adjustment is performed during the slide show, the slide show stops.
5. Using the Projector via a Network
80    
						

							Projecting Images Using DLNA-Compatible
Devices
The projector can project still images and videos transmitted from DLNA-compatible devices.
• For details about the supported file types for this function, see page 75 "Using the Server Function".
Preparation
To project files transmitted from DLNA-compatible devices, specify the following settings: • Connect the projector to a network using [Network Settings]
• Select [Enable] in [Remote Projection Control] under [Network Application Settings]
For details, see page 123 "Network Settings Menu" and page 131 "Network Application Settings
Menu".
The DLNA-compatible devices also must be connected to a network. For details about how to use
DLNA-compatible devices, see the manuals provided with the DLNA-compatible devices.
• Depending on the device used for this function, you may need to install a DLNA application on the device.
Projecting Images from DLNA-Compatible Devices
For basic operations, such as how to turn on the projector or adjust the focus, see page 35 "Projecting an Image".
The procedure of the DLNA-compatible device described below is an outline of the basic flow. The
detailed procedure varies depending on the device and application. For details, see the manuals
provided with the device and application.
1. Turn the projector on.
2. Press the [Input] button to switch the input signal to [Network PC].
The standby screen for [Network PC] input appears.
Projecting Images Using DLNA-Compatible Devices
81     
						

							3.Check the projector name on the projection screen.
4.On the DLNA-compatible device, select the projector name checked in Step 3 as a
destination device.
5. On the DLNA-compatible device, select the file you want to project.
The selected file is projected.
• For details about how to control the projected image and quit the projection, see the manuals provided with the DLNA-compatible devices and applications.
5. Using the Projector via a Network
82CZE162    
						

							6. Using the Interactive Function(RICOH PJ WX4141NI only)
This chapter explains how to use the interactive function.
Preparations for Using the Interactive Function
• To use the interactive function, you must use an RGB cable or an HDMI cable to connect the projector and computer. You cannot use the interactive function if another type of cable is used forthe connection.
• The interactive function cannot be used when a screen is displayed on the Windows extended desktop.
The interactive function allows you to operate a computer connected to the projector directly on the projection screen. You can also write and draw on a projected screen using the included software
"RICOH PJ Interactive Software".
To use the interactive function, the following settings are required.
StepSetting ContentsReference1Set Interactive Mode to [On].page 84 "Enabling Interactive
Mode"2Register the computer USB adapter to the
projector.page 85 "Registering the
Computer USB Adapter"
83 CZE126   
						

							StepSetting ContentsReference3Enable the projector to recognize the electronic
pen.page 88 "Enabling the Projector
to Recognize the Electronic Pen"4Install RICOH PJ Interactive Software on a
computer.page 90 "Installing RICOH PJ
Interactive Software"
• You only need to perform Steps 1 to 3 to use the electronic pen to operate the computer from its projected image.
• You must perform Steps 1 to 4 to write and draw on the screen.
Enabling Interactive Mode
In Interactive Mode, the projector can recognize the electronic pen and the computer USB adapter.
We recommend disabling wireless LAN communication when you enable Interactive Mode. To disable
wireless LAN communication, select [Wired LAN] or [Disable] in [Network Interface] under [Network
Settings]. For details, see page 123 "Network Settings Menu".
1. Turn on the projector to project the screen.
For details about how to turn on the projector, see page 35 "Turning On the Projector".
2. Press the [Menu] button.
3. Select [Default Settings 1], and then press the [
] button.
6. Using the Interactive Function (RICOH PJ WX4141NI only)
84  CZE040   
						

							4.Select [Interactive], and then press the [Enter] button.
5. Select [Interactive Mode], and then press the [Enter] button.
6. Select [On], and then press the [Enter] button.
7.Press the [Menu] button twice to close the menu screen.
To go on to register a computer USB adapter, see page 85 "Registering the Computer USB
Adapter".
Registering the Computer USB Adapter
• Keep computer USB adapter out of reach of children. If a child accidentally swallows a computer USB adapter, consult a doctor immediately.
To use the computer USB adapter in Interactive Mode, the adapter must be registered to the projector.
Once the computer USB adapter is registered to the projector, there is no need to register it again. You
can use the computer USB adapter with any computer that is connected to the projector.
The following operating environment is required to use the computer USB adapter.
ItemSpecificationsOperating System• Windows XP
• Windows 7
• Windows 8Preparations for Using the Interactive Function
85CZE041    
						

							ItemSpecificationsUSB port• USB Type ADo not use a USB hub.
1. Have a computer USB adapter at hand.
2.Turn on the projector.
For details about how to turn on the projector, see page 35 "Turning On the Projector".
3. Connect the computer to the projector using an RGB cable or an HDMI cable.
For details about how to connect the computer to the projector, see page 30 "Connecting to the
RGB out port" and page 30 "Connecting to the HDMI port".
4. Project the computer screen on the projector screen.
For details about how to project the computer screen, see page 36 "Projecting an Image".
5. Press the [Menu] button.
6. Select [Default Settings 1], and then press the [
] button.
7.Select [Interactive], and then press the [Enter] button.
6. Using the Interactive Function (RICOH PJ WX4141NI only)
86CWD002  CZE040   
						

							8.Check that [Interactive Mode] is set to [On].
For the setting procedure, see page 84 "Enabling Interactive Mode".
9. Select [PC Adapter Registration] and press the [Enter] button.
10. Install the computer USB adapter into the computer.
Upon being installed, the computer USB adapter flickers twice every 0.5 seconds.
• If registration succeeds The message "Registration has completed." appears. The computer USB adapter flickers every
two seconds. Press the [Enter] button to close the message.
• If registration fails If there are any obstacles between the projector and computer, the attempt to perform
registration will fail.
Registration should complete in under 2 minutes. If it does not complete after 2 minutes,
remove the USB adapter from the computer, and then insert it again.
Preparations for Using the Interactive Function
87CZE042 CWD013   
						

							11.Press the [Menu] button twice to close the menu screen.
• Do not register computer USB adapters for multiple projectors at the same time. The computer USB
adapter might not be registered correctly.
Enabling the Projector to Recognize the Electronic Pen
Once the projector recognizes the electronic pen, you can directly operate the computer display on the
screen.
1. Turn on the projector.
For details about how to turn on the projector, see page 35 "Turning On the Projector".
2. Connect the computer to the projector using an RGB cable or an HDMI cable.
For details about how to connect the computer to the projector, see page 30 "Connecting to the
RGB out port" and page 30 "Connecting to the HDMI port".
3. Project the computer screen on the projector screen.
For details about how to project the computer screen, see page 36 "Projecting an Image".
4. Install the computer USB adapter into the computer.
When the registered computer USB adapter is installed into the computer, the adapter flickers once
every 0.5 seconds. Then, when the computer USB adapter is connected to the projector, the
adapter flickers once every two seconds. If the adapter flickers twice every 0.5 seconds, you need
to register it on the projector.
To make registration, see page 85 "Registering the Computer USB Adapter".
6. Using the Interactive Function (RICOH PJ WX4141NI only)
88 CWD013