Home > Ricoh > All in One Printer > Ricoh Mp C306 User Guide

Ricoh Mp C306 User Guide

Here you can view all the pages of manual Ricoh Mp C306 User Guide. The Ricoh manuals for All in One Printer are available online for free. You can easily download all the documents as PDF.

Page 71

Combined Copying
This mode can be used to select a reproduction ratio automatically and copy the originals onto a single
sheet of copy paper.
The machine selects a reproduction ratio between 25 and 400%. If the orientation of the original is
different from that of the copy paper, the machine will automatically rotate the image by 90 degrees to
make copies properly.
Orientation of the original and image position of Combine
The image position of Combine differs according to original orientation and the...

Page 72

• Originals read from right to left
One-Sided Combine
Combine several pages onto one side of a sheet.
• You cannot use the bypass tray with this function.
There are four types of One-Sided Combine.
1 Sided 2 Originals 
 Combine 1 Side
Copies two 1-sided originals to one side of a sheet.
1 Sided 4 Originals 
 Combine 1 Side
Copies four 1-sided originals to one side of a sheet.
2 Sided 2 Pages 
 Combine 1 Side
Copies one 2-sided original to one side of a sheet.
3. Copy
70CKN010 CKN017 CKN014       

Page 73

2 Sided 4 Pages  Combine 1 Side
Copies two 2-sided originals to one side of a sheet.
1. Press [Original Settng].
2.Press [Original Size].
3. Specify the original size, and then press [OK].
4. Select original orientation.
5.Press [OK].
6. Press [Dup./Combine/Series].
7. Press [Combine].
8. Select [1 Sided] or [2 Sided] for [Original:].
If you selected [2 Sided], you can change the orientation.
Combined Copying
71   

Page 74

9.Press [Combine 1 Side].
10. Select the number of originals to combine.
11. Press [OK].
12. Select the paper tray.
13. Place the originals, and then press [Start].
Two-Sided Combine
Combines various pages of originals onto two sides of one sheet.
• You cannot use the bypass tray with this function.
There are four types of Two-Sided Combine.
1 Sided 4 Originals 
 Combine 2 Sides
Copies four 1-sided originals to one sheet with 2 pages per side.
1 Sided 8 Originals 
 Combine 2 Sides
Copies eight 1-sided...

Page 75

2 Sided 8 Pages  Combine 2 Sides
Copies four 2-sided originals to one sheet with 4 pages per side.
1. Press [Original Settng].
2.Press [Original Size].
3. Specify the original size, and then press [OK].
4. Select original orientation.
5.Press [OK].
6. Press [Dup./Combine/Series].
7. Press [Combine].
8. Select [1 Sided] or [2 Sided] for [Original:].
Combined Copying
73   

Page 76

9.Press [Combine 2 Sides].
10. Press [Orientation].
11. Select [Top to Top] or [Top to Bottom] for [Original:] if the original is two-sided.
12. Select [Top to Top] or [Top to Bottom] for [Copy:], and then press [OK].
13. Select the number of originals to combine.
14. Press [OK].
15. Select the paper tray.
16. Place the originals, and then press [Start].3. Copy
74  

Page 77

Copying onto Custom Size Paper
Paper that has a horizontal length of 139.0–600.0 mm (5.48–23.62 inches) and a vertical length of
76.2–216.0 mm (3.00–8.50 inches) can be fed in from the bypass tray. Note however that the
limitation on the horizontal and vertical length range will vary depending on which options are installed.
• When prints are delivered to Internal tray 2: Horizontal length: 210.0–600.0 mm (8.27–23.62 inches), vertical length: 139.7–216.0 mm(5.50–8.50 inches)
1. Load the paper face down...

Page 78

Copying onto Envelopes
This section describes how to copy onto regular size and custom size envelopes. Place the original on
the exposure glass and place the envelope in the bypass tray.
Specify the thickness of the paper according to the weight of the envelopes you are printing on. For
details about the relationship between paper weight and paper thickness and the sizes of envelopes that
can be used, see page 134 "Recommended Paper Sizes and Types".
About handling envelopes, supported envelope...

Page 79

1.Load the envelopes face down in the bypass tray.
The bypass tray (
) is automatically selected.
2. Press [
].
3. Press [Paper Size].
4. Specify the envelope size, and then press [OK] twice.
5. Place the originals, and then press [Start].
Copying onto Envelopes
77   

Page 80

Sort
The machine assembles copies as sets in sequential order.
1. Press [Finishing].
2.Select [Sort], and then press [OK].
3.Enter the number of copy sets using the number keys.
4. Place the originals.
5. Select the paper tray.
6. Press [Start].
3. Copy
78CKN018   
Start reading Ricoh Mp C306 User Guide

Related Manuals for Ricoh Mp C306 User Guide

All Ricoh manuals