Ricoh Mp C306 User Guide

1. Positioning mark
3. Lower the ADF.
Placing Originals in the Auto Document Feeder
Be sure not to load the original untidily. Doing so may cause the machine to display a paper misfeed
message. Also, be sure not to place originals or other objects on the top cover. Doing so may cause a
malfunction.
1. Adjust the original guide to the original size.
2. Place the aligned originals squarely face up in the ADF.
Do not stack originals beyond the limit mark.
The first page should be on the top.
When placing...

2. Getting Started
60  

3. Copy
This chapter describes frequently used copier functions and operations. For information not included in
this chapter, see Copy/ Document Server available on our website.
Basic Procedure To make copies of originals, place them on the exposure glass or in the ADF.
When placing the original on the exposure glass, start with the first page to be copied. When placing
the original in the ADF, place them so that the first page is on the top.
(mainly Europe)
For details about placing the original on the...

9.Press [Start].
When placing the original on the exposure glass, press [
] after all originals are scanned. Some
functions such as Batch mode may require that you press [
] when placing originals in the ADF.
Follow the messages that appear on screen.
10. When the copy job is finished, press [Reset] to clear the settings.
3. Copy
62    

Auto Reduce / Enlarge
The machine automatically calculates the reproduction ratio based on the sizes of the originals and the
paper you have specified. The machine will rotate, enlarge, or reduce the image of the originals to fit
them to the paper.
• You cannot use the bypass tray with this function.
• If you select a reproduction ratio after pressing [Auto Reduce / Enlarge], [Auto Reduce / Enlarge] is canceled and the image cannot be rotated automatically.
This is useful to copy different size originals...

4.Select original orientation.
5.Press [OK].
6. Press [Auto Reduce / Enlarge].
7. Select the paper tray.
8. Place the originals, and then press [Start].
3. Copy
64  

Duplex Copying
Copies two 1-sided pages or one 2-sided page onto a 2-sided page. During copying, the image is
shifted to allow for the binding margin.
• You cannot use the bypass tray with this function.
There are two types of Duplex.
1 Sided 
 2 Sided
Copies two 1-sided pages on one 2-sided page.
2 Sided 
 2 Sided
Copies one 2-sided page on one 2-sided page.
The resulting copy image will differ according to the orientation in which you place your originals (
 or
).
Original orientation and completed...

OriginalPlacing originalsOriginal
OrientationOrientationCopyTop to TopTop to Bottom
1. Press [Dup./Combine/Series].
2.Make sure that [Duplex] is selected.
If [Duplex] is not selected, press [Duplex].
3. Select [1 Sided 
 2 Sided] or [2 Sided  2 Sided] according to how you want the
document to be output.
To change the original or copy orientation, press [Orientation].
4. Press [OK].
5. Place the originals.
6. Press [Original Settng].
3. Copy
66          

7.Select the original orientation, and then press [OK].
8.Select the paper tray.
9. Press [Start].
Specifying the Original and Copy Orientation
Select the orientation of the originals and copies if the original is two-sided or if you want to copy onto both sides of the paper.
• Top to Top
• Top to Bottom
1. Press [Orientation].
Duplex Copying
67CKN011 CKN012   

2.Select [Top to Top] or [Top to Bottom] for [Original:] if the original is two-sided.
3.Select [Top to Top] or [Top to Bottom] for [Copy:].
4. Press [OK].
3. Copy
68