Ricoh Mp 4002 User Guide

Loading Paper into the Bypass Tray
Use the bypass tray to use OHP transparencies, adhesive labels, translucent paper, and paper that
cannot be loaded in the paper trays.
• The maximum number of sheets you can load at the same time depends on paper type. Load only
as much paper as can be held between the paper guides on the bypass tray. For the maximum
number of sheets you can load, see p.138 "Recommended Paper Sizes and Types".
1. Open the bypass tray. 2.
Insert the paper face down until you hear...

• Certain types of paper might not be detected properly when placed on the bypass tray. If this
happens, remove the paper and place it on the bypass tray again.
• Pull the extender out when loading sheets larger than A4 , 8
1
/ 2 × 11  in the bypass tray.
• When the [Panel Key Sound] is turned off, it does not sound if you insert paper into the bypass tray.
For details about [Panel Key Sound], see "System Settings", Connecting the Machine/ System
Settings .
• If the machine stops detecting paper...

Setting the paper size using the control panel
1.
Press the [User Tools/Counter] key. 2.
Press [Tray Paper Settings].
3. Press [Printer Bypass Paper Size].
4. Select the paper size. 5.
Press [OK].
6. Press the [User Tools/Counter] key. • When loading thick paper, thin paper, or OHP transparencies, specify the paper size and the
paper type. Loading Paper into the Bypass Tray
131CJS039    

Setting custom size paper using the control panel
1.
Press the [User Tools/Counter] key. 2.
Press [Tray Paper Settings].
3. Press [Printer Bypass Paper Size].
4. Press [Custom Size].
If a custom size is already set, press [Change Size].
5. Press [Vertical], enter the size of the paper using the number keys, and then press [ ].
6. Press [Horizontal], enter the size of the paper using the number keys, and then press [ ].
7. Press [OK] twice.
8. Press the [User Tools/Counter] key. • When loading thick...

1.
Press the [User Tools/Counter] key. 2.
Press [Tray Paper Settings].
3. Press [ Next].
4. Press [Paper Type: Bypass Tray].
5. Select the proper items, according to the paper type you want to set.
• Press [OHP (Transparency)] on the [Paper Type] area when loading OHP transparencies.
•
To load thin or thick paper, press [Do not Display] on the [Paper Type] area, and then select
the appropriate paper thickness in the [Paper Thickness] area. 6.
Press [OK].
7. Press the [User Tools/Counter] key. • We...

Loading Paper into Tray 3 (LCT)
• When paper loaded in the right side of Tray 3 (LCT) runs out, paper on the left is automatically
shifted to the right. Do not pull out Tray 3 (LCT) while the tray is moving paper; wait until sounds
stop coming from the tray.
• For the right stack, align the right edge of the paper with the right edge of the tray. For the left
stack, align the left edge of the paper to the left edge of the tray.
• (mainly Europe and Asia)
Tray 3 (LCT) can hold A4  paper only. If you want...

• Left half of the tray pulled out
3.
Carefully push the paper tray fully in. • You can load paper even if Tray 3 (LCT) is in use. It is okay to pull out the left half of the tray while
Tray 3 (LCT) is in use. Loading Paper into Tray 3 (LCT)
135CJW017    

Loading Paper into the Large Capacity Tray
(LCT)
• (mainly Europe and Asia)
The large capacity tray (LCT) can hold A4  paper only. If you want to print on 8
1
/ 2 × 11  or B5
JIS  from the large capacity tray (LCT), contact your service representative.
• (mainly North America)
The large capacity tray (LCT) can hold 8 1
/ 2 × 11  paper only. If you want to print on A4  or B5
JIS  from the large capacity tray (LCT), contact your service representative.
1. Open the right cover of the large capacity tray...

4.
Load paper by repeating steps 2 and 3.
5. Close the right cover of the large capacity tray (LCT). Loading Paper into the Large Capacity Tray (LCT)
137CJW020   

Recommended Paper Sizes and Types
This section describes recommended paper sizes and types.
• If you use damp or curled paper, a staple clogging or paper jam may occur.
•
Do not use paper designed for inkjet printers, as these may stick to the fusing unit and cause a
misfeed.
•
When you load OHP transparencies, check the front and back of the sheets, and place them
correctly, or a misfeed might occur.
• For details about and recommendations concerning thick paper, see p.144 "Thick Paper".
• For...