Panasonic Wma Mp3 Cd Player Receiver Cq C8803u Operating Instructions

							CQ-C8803U
Radio
English
21
Radio
This chapter explains how to listen to the radio.
1Press [SRC] (Source) to select the
radio mode.
2Press [BAND]to select a band.
3Select a station.
Frequency adjustment
[]] (TUNE): Lower
[[] (TUNE): Higher
Note:Hold down for 0.5 sec. or more and release
for station search.
Preset station selection
[{] (P·SET: Preset): Lower preset number
[}] (P·SET: Preset): Higher preset number
Note:Direct selection can be executed with [1]to
[6] buttons on remote control.
Operation Flow
Up to 6 stations can be preset in AM, FM1, FM2, and
FM3 respectively.
Preset stations can be simply called up by pressing [}]
(P·SET) or [{] (P·SET).
Notes:
¡Direct selection can be executed with [1]to [6] but-
tons on remote control.
¡You can switch between 6 and 18 for FM presetting
stations. (EACH BAND/ALL BAND)
¡Preset stations are changeable. (Preset Swap)
Auto Preset Memory (APM)
Stations with good receiving conditions automatically
preset. 
1Select a band.
2Hold down
[BAND](APM)
for 2 sec. or
more.
The preset stations under best receiving conditions
are received for 5 sec. each after presetting the sta-
tions (SCAN). To stop scanning, press [}]or [{].
Note:New stations overwrite existing saved stations.
Manual station preset
1Tune in to a station.
2Hold down [}]or [{]for 2 sec. or
more.
3Select a preset number by pressing 
[}] or[{].
Note: If [BAND]is pressed while receiving an FM
station, FM broadcasting is changeable among FM 1
to FM 3.
4Hold down [BAND](SET) for 2 sec. or
more to determine the selection.
Notes:
¡In step 2, a station can be registered by holding down
the numeric button [1]to [6]for 2 sec. or more.
¡To stop presetting stations, press 
[D](DISP:
Display).
¡The operation above allows users to replace the cur-
rent station with the station preset in the selected
number while selecting a preset station.
Sound Control
Station Preset
(APM: Auto Preset Memory, P·SET: Preset) 
						

							22CQ-C8803U
Radio
Band
Frequency
Preset Number
Radio Mode DisplayLights when LOCALis
activated. (apage 22)
Lights while receiving an FM stereo signal.
Lights when MONOis activated. (apage 22)
In the AM mode, only AUDIO FILTER and LOCAL can be
selected.
1Press [MENU]to
display the menu
display.
For using the remote
control, hold down
[SEL](MENU)for 2
sec. or more.
2Press [}]or [{]to select a mode to be
adjusted.
3Press [BAND]
(SET)to adjust.
4Press [MENU]to confirm the adjust-
ment.
For using the remote control, hold down [SEL]
(MENU)for 2 sec. or more.
MONO (Monaural)
Noise reduction when the signal strength decreases
: Receiving in stereo (default)
: Receiving in mono and reducing the noise level
LOCAL
Setting when searching for a station
: Searching even for a relatively low-intensity
radio wave station (default)
: Searching only for a high-intensity radio wave
station
AUDIO FILTER
IF filter setting for noise suppression
: Wide range
: Middle range (default)
: Narrow range
PRESET
You can select 6 or 18 stations for FM presetting with the
use of APM.
:
Presets 6 stations with good reception to the selected
band from FM1 to FM3. This function is useful for preset-
ting stations in different areas in different bands.
(default)
: 
Presets 6 stations to FM1 to FM3 respectively, that is, 18
stations in total at the same time. This function is useful
for presetting more than 6 stations.
Radio Menu Display 
						

							23
English
CQ-C8803U
Radio
You can assign your favorite broadcasting station to
the [D·M]button. As the result of doing that, your
favorite broadcasting station can be received even if
the unit is in the CD mode or other modes. (Default:
FM 87.9 MHz)
Note:For the use of an FM transmitter, it is useful
for users to register applicable frequencies on D·M
(Direct Memory).
D·M station Calling
Press [D·M] (Direct Memory).
D·M station Setting
qSelect a station you would like to preset.
wHold down [D·M] (Direct Memory) for 2 sec. or
more.
Note:If the unit is turned off during receiving a broad-
casting station via DM, the unit starts again receiving the
broadcasting station via DM by turning on the unit.
1Press [MENU]to display the menu dis-
play.
For using the remote
control, hold down
[SEL] (MENU)for 2
sec. or more.
2Press [}]or [{]to select a mode to be
adjusted.
3Press [BAND]
(SET)to adjust.
4Press [MENU]to confirm the adjust-
ment.
For using the remote control, hold down [SEL]
(MENU)for 2 sec. or more.
RADIO AUDIO FILTER
You can select the reception status (band) of FM stations
registered on D·M.
: OFF (default)
: High cut level 1
: High cut level 2
D•M Menu Display Direct Memory 
						

							24
CD Player
CQ-C8803U
When a disc is already loaded, press [SRC] (Source) to
select the CD mode.
1Press [u] (OPEN)to open the face
plate.
When a disc is already loaded ( lights), the
disc will automatically be ejected.
2Load a disc with the printed side facing
up.
The face plate closes automatically, and the unit rec-
ognizes the disc and starts playing automatically,
too.
Note:The panel automatically closes after 20 sec-
onds.
3Select a desired portion.
Track selection
[7] (TRACK): Next track
[6] (TRACK): Preceding track (press twice)
Note: Hold down for fast forward/reverse.
Pause
Press [BAND] (
h/5).
Press again to cancel.
4Press [u] (OPEN)to eject the disc.
Operation Flow CD Mode Display
Printed side
Track number Time
Lights when the disc is
loaded. Play Mode indicators
Lights when each mode is
activated. CD-TEXT display
Notes:
¡For scrolling text, hold down [D] (DISP:DISPLAY)
for 2 sec. or more. 
¡“NO TEXT” is displayed when there is no information
on the disc. 
						

							CQ-C8803U25
English
CD Player
Cautions:
¡This unit does not support 8 cm (3”) discs.
¡Do not use irregularly shaped discs. (apage 40)
¡Do not use discs that have a seal or label attached.
¡To avoid damaging the face plate, do not push it down or
place objects on it while it is open.
¡Do not pinch your finger or hand in the face plate when the
face plate is in motion.
¡Do not insert foreign matter into the disc slots.¡Refer to the section on “Notes on CD/CD Media (CD-ROM,
CD-R, CD-RW)” (apage 40).
¡This unit does not support a MIX mode CD (a CD containing
both CD-DA and MP3/WMA data). In case of using such a
CD, problems may occur such as anacoustic playback.
Random and Repeat play can be set.
1Press [MENU]to display the menu dis-
play.
For using the remote
control, hold down
[SEL] (MENU)for 2
sec. or more.
2Press [}]or [{]to select a mode to be
adjusted.
3Press [BAND]
(SET)to adjust.
4Press [MENU]to confirm the adjust-
ment.
For using the remote control, hold down [SEL]
(MENU)for 2 sec. or more.
RANDOM
: Off (default)
: Random playback
REPEAT
: Off (default)
: Playing the current track repeatedly
TEXT (CD-TEXT)
: Enabled (default)
: Disabled
Play Mode Selection
One-touch operation is available for selecting a track
playing style by use of [RANDOM]or [REPEAT]. 
RANDOM
Press [RANDOM].
Press again to cancel.
REPEAT
Press [REPEAT].
Press again to cancel.
SCAN play
You can find your favorite file by playing first 10-sec. of
each track.
Press [SCAN].
Press again to cancel.
Direct Access
A track can be directly selected.
Example: track number 5
1Press [#](NUMBER).
2Press [5].
3Press [SET]. 
Note:To suspend direct
selection, press [DISP](Display).
Functions Only by 
Remote Control UnitRandom, Repeat Play (CD Menu Display)
(RANDOM, REPEAT) 
						

							26
MP3/WMA Player
CQ-C8803U
Operation Flow
When a disc is already loaded, press [SRC] (Source) to
select the MP3/WMA mode.
1Press [u] (OPEN)to open the face
plate. 
When a disc is already loaded ( lights), the
disc will automatically be ejected.
2Load a disc with the printed side facing
up 
The face plate closes automatically, and the unit rec-
ognizes the disc and starts playing automatically,
too. (It may take several minutes to start for a disc
that has a lot of files.)
Note:The panel automatically closes after 20 sec-
onds.
3Select a desired portion.
Folder selection
[}] (FOLDER): Next folder
[{] (FOLDER): Preceding folder
File selection
[7] (TRACK): Next file
[6] (TRACK): Preceding file (press twice)
Note: Hold down for fast forward/reverse.
Pause
Press [BAND] (
h/5).
Press again to cancel.
4Press [u] (OPEN)to eject the disc.
MP3/WMA Mode Display
Printed side
Folder numberTime
Lights when the disc is
loaded. Play Mode indicators
Lights when each mode is
activated.
Information Display
Notes:
¡For scrolling text, hold down [D] (DISP:DISPLAY)
for 2 sec. or more. 
¡“NO TEXT” is displayed when there is no information
on the disc.
¡ID3/WMA tag information is displayed for the album
name and title/artist name. File number
File type indicator
(Folder Random)
(Folder Repeat)
(Folder Scan) 
						

							CQ-C8803U27
English
MP3/WMA Player 
Notes:
¡Refer to the section on “Notes on MP3/WMA” (apage 28)
¡This unit does not support a MIX mode CD (a CD containing both CD-DA and MP3/WMA data). In case of using such a CD,
problems may occur such as anacoustic playback.
Random and Repeat play can be set.
1Press [MENU]to display the menu dis-
play.
For using the remote
control, hold down
[SEL] (MENU)for 2
sec. or more.
2Press [}]or [{]to select a mode to be
adjusted.
3Press [BAND]
(SET) to adjust.
4Press [MENU]to
confirm the adjustment.
For using the remote control, hold down [SEL]
(MENU)for 2 sec. or more.
RANDOM
: Off (default)
: Random playback (disc)
FOLDER RANDOM
: Off (default)
: Random playback (folder)
REPEAT
: Off (default)
: Playing the current file repeatedly
FOLDER REPEAT
: Off (default)
: Playing the current folder repeatedly.
TEXT
: Folder name/File name (default)
: Album/Title (tag information)
: No display
Play Mode Selection
One-touch operation is available for selecting a file
playing style by use of [RANDOM]or [REPEAT].
RANDOM, REPEAT
Press the button. Press again to cancel.
FOLDER RANDOM, FOLDER REPEAT
Hold down the button for 2 sec. or more. Hold
down again to cancel.
SCAN play
You can find your favorite file by playing first 10-sec. of
each file.
SCAN (All files)
Press [SCAN]. Press again to cancel.
FOLDER SCAN (1st file in each folder)
Hold down [SCAN]for 2 sec. or more. Hold down
again to cancel.
Direct Access
A file in the current folder can be directly selected.
Example: file number 5
1Press [#](NUMBER).
2Press [5].
3Press [SET].
Notes:
¡For folder selection, enter a number after pressing [#]
(NUMBER) twice.
¡To suspend direct selection, press [DISP](Display).
Random, Repeat Play (MP3/WMA Menu Display)
(RANDOM, REPEAT)
Functions Only by 
Remote Control Unit 
						

							28
MP3/WMA Player
CQ-C8803U
What is MP3/WMA?
MP3 (MPEG Audio Layer-3) and WMA (Windows MediaTM
Audio) are the compression formats of digital audio. The
former is developed by MPEG (Motion Picture Experts
Group), and the latter is developed by Microsoft
Corporation. Using these compression formats, you can
record the contents of about 10 music CDs on a single
CD media (This figures refer to data recorded on a 650
MB CD-R or CD-RW at a fixed bit rate of 128 kbps and a
sampling frequency of 44.1 kHz).
Note:MP3/WMA encoding and writing software is not
supplied with this unit.
Points to remember when making MP3/WMA files
Common
¡High bit rate and high sampling frequency are recom-
mended for high quality sounds.
¡Selecting VBR (Variable Bit Rate) is not recommended
because playing time is not displayed properly and
sound may be skipped.
¡The playback sound quality differs depending on the
encoding circumstances. For details, refer to the user
manual of your own encoding software and writing
software.
MP3
¡It is recommended to set the bit rate to “128 kbps or
more” and “fixed”.
WMA
¡It is recommended to set the bit rate to “64 kbps or
more” and “fixed”.
¡Do not set the copy protect attribute on the WMA file
to enable this unit to play back.
Display Information
Displayed items
Displayable characters
¡Displayable length of file name/folder name: within 64
characters. (Unicoded file and folder names are
reduced by half in the number of displayable charac-
ters.)
¡Name files and folders in accordance with the stan-
dard of each file system. Refer to the instructions of
writing software for details.
¡ASCII character set and special characters in each lan-
guage can be displayed.
ASCII character set
A to Z, a to z, digits 0 to 9, and the following sym-
bols:
(space) ! ” # $ % & ’ ( )  * + , - . / : ; < = > ? @ [  ] ˆ
_ ` { | } ~
Notes:
¡With some software in which MP3/WMA format files
have been encoded, the character information may not
be displayed properly.
¡Undisplayable characters and symbols will be convert-
ed into an asterisk (
*).
Caution:
Never assign the “.mp3”, or “.wma” file
name extension to a file that is not in the
MP3/WMA format. This may not only pro-
duce noise from the speaker damage, but
also damage your hearing.
¡CD-TEXT
Disc title
Track title
¡MP3/WMA
Folder name
File name¡MP3 (ID3 tag)
Album name
Title name/artist name
¡WMA (WMA tag)
Album name
Title name/artist name
Notes on MP3/WMA 
						

							CQ-C8803U29
English
MP3/WMA Player
¡You are recommended to minimize the chances of
making a disc that contains both CD-DA files and
MP3/WMA files.
¡If CD-DA files are on the same disc as MP3 or WMA
files, the songs may not play in the intended order,
or some songs may not play at all.
¡When storing MP3 data and WMA data on the same
disc, use different folders for each data.
¡Do not record files other than MP3/WMA files and
unnecessary folder on a disc.
¡The name of an MP3/WMA file should be added by
rules as shown in the following descriptions and also
comply with the rules of each file system.
¡You may encounter trouble in playing MP3/WMA files
or displaying the information of MP3/WMA files
recorded with certain writing software or CD
recorders.¡The file extension “.mp3” or “.wma” should be
assigned to each file depending on the file format.
¡This unit does not have a play list function.
¡Although Multi-session recording is supported, the
use of Disc-at-Once is recommended.
Supported file systems
ISO 9660 Level 1/Level 2, Apple Extension to ISO 9660,
Joliet, Romeo
Note: Apple HFS, UDF 1.50, Mix CD and CD Extra are
not supported.
Recording MP3/WMA files on a CD-media
32, 44.1, 48 kHz Yes 32 k – 192 kbps Windows Media Audio Ver. 2, 7, 8, 9*16, 22.05, 24 kHz Yes 8 k – 160 kbps MPEG 2 audio layer 3 (MP3)32, 44.1, 48 kHz Yes 32 k – 320 kbps MPEG 1 audio layer 3 (MP3)Sampling frequency VBR Bit rate Compression method
Compression formats 
(Recommendation:“Points to remember when making MP3/WMA files” on the previous page)
Folder selection order/file playback order
Root Folder
(Root Directory)
Folder Selection
File Selection
Tree 1 Tree 2 Tree 3 Tree 4 Tree 8
(Max.)
2 1
34q
q we
r
t
yy
5
6
8
18
7
–In the order
–In the order
Maximum number of files/folders
¡Maximum number of files: 511 (files + folders)
¡Maximum number of files in one folder: 255
¡Maximum depth of trees: 8
¡Maximum number of folders: 255 (Root folder is
included.)
Notes:
¡You can shorten the duration between data read and
playback by decreasing the quantity of files or folders,
or the depth of the hierarchy.
¡This unit counts the number of folders irrespective of
the presence or absence of an MP3/WMA file. 
¡If the selected folder does not contain any MP3/WMA
files, the nearest MP3/WMA files in the order of play-
back will be played.
¡Playback order may be different from other MP3/WMA
players even if the same disc is used.
¡“ROOT” appears when displaying the root folder
name.
Copyright
It is prohibited by copyright laws to copy, distribute and
deliver copyrighted materials such as music without the
approval of copyright holder except enjoying yourself
personally.
No warranty
Above description complies with our investigations as of
December 2005. It has no warranty for reproducibility
and displayability of MP3/WMA.
Notes on MP3/WMA (continued)
* WMA 9 Professional/LossLess/Voice are not supported. 
						

							30CQ-C8803U
Audio Setting
Main volume adjustment 
(Setting range: 0 to 40, Default: 18)
q: Up
w: Down
FRONT FOCUS
(Setting range: Lv 1to Lv 10 and OFF, Default: Lv 5)
q: Up
w: Down
REAR FOCUS
(Setting range: Lv 1to Lv 10 and OFF, Default: Lv 5)
q: Up
w: Down
FRONT-TruBass
(Setting range: Lv 1to Lv 10 and OFF, Default: Lv 4)
q: Up
w: Down
REAR-TruBass
(Setting range: Lv 1to Lv 10 and OFF, Default: Lv 4)
q: Up
w: Down
SUB.W-TruBass
(Setting range: Lv 1to Lv 10 and OFF, Default: Lv 4)
q: Up
w: Down
F-R MIX (Front to Rear Mixing)
(Setting range: Lv 1to Lv 10 and OFF, Default: Lv 4)
q: Up
w: Down
Audio Setting (when CS AUTO activated)
1Set the CS AUTO mode to on.
(apage 18)
2Press [VOLUME]
(
PUSH SEL:
Select) to display
the menu dis-
play.
3Press [VOL-
UME] (
PUSH
SEL
: Select)to
select a mode to
be adjusted.
4Turn [VOLUME]clockwise or counter-
clockwise to adjust.
Note:If no operation takes place for more than 10 sec.
in the audio menu (2 sec. in Main volume adjustment),
the display returns to the regular mode.
Notes:
¡TruBass®
TruBass is an audio technology to which the technique
of bass sound reproduction used in pipe organs is
electrically applied, and in which an equalizer is not
used at all and bass sound from the speakers to be
used is richly reproduced.
¡FOCUS
®
Focus is an audio technology that moves the sound
image of playing sound vertically to reproduce the
sounds of instruments and voices clearly.