Panasonic Projector PT-DS20KU User Manual

[ADVANCED MENU]
ENGLISH - 81
Settings
[INPUT RESOLUTION]
You can adjust to achieve an optimal image when 
there is a flickering image or smeared outlines.
1) Press ▲▼ to select [INPUT 
RESOLUTION].
2)
 
Press the  button.
▶z The  [INPUT RESOLUTION]
 screen is 
displayed.
3) Press  ▲▼ to select [T
OTAL DOTS], 
[DISPLAY DOTS], [TOTAL LINES], or 
[DISPLAY LINES], and press  ◀▶ to 
adjust it.
▶z Values corresponding to the input signal are 
displayed automatically for each item. Change 
the displayed values...

[ADVANCED MENU]
82 - ENGLISH
Settings
▶■To display the adjustment marker
8) Press 
▲▼ to select [MARKER].
9)  
Press  ◀▶ to switch [ON].
▶z
A marker for image position adjustment is 
displayed. The position where the red and 
green lines overlap for the sets to join will be 
the optimal point.
Make sure to set the correction width for the 
sets to join as the same value. Optimal joining 
is not possible with the sets with different 
correction widths.
The optimal point \Ris the point where\R this line...

[ADVANCED MENU]
ENGLISH - 83
Settings
 zThe [AUTO TESTPATTERN] settings change in 
conjunction with the [AUTO TESTPATTERN] in 
[COLOR MATCHING].
 z Adjustment of the tilt of the border between [NON-
OVERLAPPED BLACK LEVEL] and [BLACK 
BORDER LEVEL] is a function to perform the 
adjustment of [GEOMETR

Y] (
 page 76) together 
with the edge blending. If [NON-OVERLAPPED 
BLACK LEVEL] is tilted by correcting the keystone 
distortion from [KEYST
ONE] in [GEOMETRY], 
perform Steps 17) and 18) to adjust the...

[DISPLAY LANGUAGE] menu
84 - ENGLISH
Settings
Select [DISPLAY LANGUAGE] from the main 
menu, and display the sub-menu.
Refer to “Navigating through the menu” 
(
 page 63) for the operation of the menu 
screen.
 z Press 
▲▼ to select a language, and press the 
 button to set.
Changing the display 
language
You can select the language of the on-screen display.
ENTER
DISPLAY LANGUAGE
SELECT
SET
 zVarious menus, settings, adjustment screens, 
control button names, etc., are displayed in the 
selected...

[3D SETTINGS] menu (PT-DZ21KU and PT- DS20KU only)
ENGLISH - 85
Settings
[3D SETTINGS] menu (PT-DZ21KU and PT- DS20KU only)
Select [3D SETTINGS] from the main menu, and 
select the item from the sub-menu.
Refer to “Navigating through the menu ” 
(
 page 63) for the operation of the menu screen.
 z After selecting the item, press 
▲▼◀▶ to set.
[3D SYSTEM SETTING]
Set a picture display method for use during 3D signal 
input as necessary for the 3D system in use.
1) Press 
▲▼ to select [3D SYSTEM...

[3D SETTINGS] menu (PT-DZ21KU and PT- DS20KU only)
86 - ENGLISH
Settings
▶zItems set in [3D SYNC2]
[OFF]
Not used.
[1] Stereo synch output
[2] 3D trigger output
[3] Through 3D SYNC1
[4] Stereo synch output
[5] 3D trigger output
[6] Through 3D SYNC1
[7] Stereo synch output
[8] 3D trigger output
[9] Frame synch output
[10] Frame synch output
[11] 3D IR TRANSMITTER (–) output
6) If you selected [1], [4], [7], or [10], 
press 
▲▼ to select [STEREO SYNC 
OUTPUT DELA
Y] and press ◀▶ to set 
the amount of delay...

[3D SETTINGS] menu (PT-DZ21KU and PT- DS20KU only)
ENGLISH - 87
Settings
[3D INPUT FORMAT]
Set the 3D format for the image signals being input. 
Set a 3D format that matches the input signal.
1) Press 
▲▼ to select [3D INPUT 
FORMA T].
2)
 
Press the  button.
▶z The  [3D INPUT FORMAT] screen is displayed.
3) Press 
▲▼ to select a 3D format.
4)  
Press the  button.
[AUTO]*1Automatically detects 3D format of 
input image signals and displays 
images.
[NATIVE] Forcibly displays images in 2D 
regardless of...

[3D SETTINGS] menu (PT-DZ21KU and PT- DS20KU only)
88 - ENGLISH
Settings
[3D PICTURE BALANCE]
Correct a shift when the brightness or color differ in 
the right eye and left eye images.
1) Press 
▲▼ to select [3D PICTURE 
BALANCE].
2)
 
Press the  button.
▶z The  [3D PICTURE BALANCE]
 screen is 
displayed.
3) Press  ▲▼ to select an item, and press 
◀▶  to adjust the setting.
▶z
Correct the setting value parts of the right eye 
image based on the left eye image.
[CONTRAST] You can adjust the contrast of...

[3D SETTINGS] menu (PT-DZ21KU and PT- DS20KU only)
ENGLISH - 89
Settings
[3D FRAME DELAY]
Adjust the timing of the left-right switch of an image.
1) Press 
▲▼ to select [3D FRAME 
DELA Y].
2)
 
Press  ◀▶ to switch [3D FRAME 
DELA

Y].
▶zValues in the following range change by units of 
10 us.
0 us to 25 000 us
[3D TEST MODE]
Set the image display format for use with 3D system 
adjustments.
1) Press  ▲▼ to select [3D TEST MODE].
2)  
Press  ◀▶ to switch [3D TEST MODE].
▶z
The setting will change as...

[3D SETTINGS] menu (PT-DZ21KU and PT- DS20KU only)
90 - ENGLISH
Settings
[SAFETY PRECAUTIONS 
MESSAGE]
Set to show or hide safety precaution messages 
related to 3D viewing when the projector is switched 
on.
1) Press 
▲▼ to select [SAFETY
 
PRECAUTIONS MESSAGE].
2)
 
Press  ◀▶ to switch [SAFETY

 
PRECAUTIONS MESSAGE].
▶z The setting will change as follows each time 
you press the button.
[ON][OFF]
[ON] Shows safety precaution 
messages related to 3D viewing 
when the projector is switched on.
[OFF]...