Panasonic Projector PT-DS20KU User Manual

[PROJECTOR SETUP] menu
ENGLISH - 111
Settings
has been turned off with the input set to SDI2, 
projection will start with the SDI1 input, even when 
[STARTUP INPUT SELECT] is set to [LAST USED].
[RS-232C]
Set the communication conditions of the / terminal.
1) Press ▲▼ to select [RS-232C].
2)  
Press the  button.
▶z The  [RS-232C]
 screen is displayed.
3) Press 
▲▼ to select an item.
▶■To set the communication 
condition of the  
terminal
4) Select [(IN) BAUDRA TE] in Step 3).
5)  
Press  ◀▶ to switch...

[PROJECTOR SETUP] menu
112 - ENGLISH
Settings
[STATUS]
Displays the status of the projector.
1) Press ▲▼ to select [ST
ATUS].
2)  
Press the  button.
▶z The  [STATUS] screen is displayed.
3) Press 
◀▶ to switch the pages.
[INPUT] Displays the input terminal 
currently selected.
[BACKUP  INPUT 
STATUS] Displays whether switching 
to the backup input signal is 
possible or not when [BACKUP 
INPUT MODE] is set to [ON], [1], 
or [2]. (
 page 94)
[SIGNAL
 NAME] Displays the input signal name.
[SIGNAL...

[PROJECTOR SETUP] menu
ENGLISH - 113
Settings
[SIGNAL 
INFORMATION]
 z [MEMOR
 Y NO.]: 
Displays the memory number 
of the input signal.
 z [INPUT]: 
Displays the input terminal 
currently selected.
 z[SIGNAL
  NAME]: 
Displays the input signal name.
 z
[SIGNAL FREQUENCY]: 
Displays the frequency of the 
input signal.
 z [SYNC.ST

ATE]: 
Displays the synch polarity of 
the input signal.
 z [V

.SYNC WIDTH]: 
Displays the vertical sync signal 
pulse width of the input signal.
 z[SCAN TYPE]: 
Displays the...

[PROJECTOR SETUP] menu
114 - ENGLISH
Settings
[FUNCTION BUTTON]
Set the functions of the  button on the remote 
control.
1) Press ▲▼ to select [FUNCTION 
BUTT ON].
2)
 
Press the  button.
▶z The 
[FUNCTION BUTTON]  screen is displayed.
3) Press 
▲▼ to select a function.
[DISABLE]
Disables the  button.
[P IN P] Switches [OFF]/[USER1]/[USER2]/
[USER3] in [P IN P]. (
 page 118)
[SUB 
MEMOR
Y] Lists the sub memory. (
 page 123)
[SYSTEM 
SELECTOR]Switches to [SYSTEM SELECTOR] 
settings. (
 page 72)
[SYSTEM...

[PROJECTOR SETUP] menu
ENGLISH - 115
Settings
[LENS CALIBRATION]
Automatically set the lens shift limit values and home 
position for the projector.
1) Press ▲▼ to select [LENS 
CALIBRA TION].
2)
 
Press the  button.
▶z A confirmation message is displayed.
3) Press 
◀▶ to select [OK], and press 
the  button.
▶z To cancel, select [CANCEL].
▶z
The lens moves up, down, left and right to 
automatically set the lens shift limit values and 
home position.
▶zThe lens stops to complete the calibration.
Note
 z...

[PROJECTOR SETUP] menu
116 - ENGLISH
Settings
▶■To call the lens position
4) Select [LENS MEMOR
Y LOAD] in Step 
3).
5)
 
Press the  button.
▶z The  [LENS MEMORY LOAD] screen is 
displayed.
6) Press  ▲▼ to select the item to 
initialize, and press the  
button.
7)
 
When the confirmation is displayed, 
select [OK], and press the  
button.
▶z Moves automatically to the registered shift, 
zoon and focus positions.
Note
 z Lens memory is not guaranteed to be 100% 
reproduced.
 zThe zoom and focus positions...

[PROJECTOR SETUP] menu
ENGLISH - 117
Settings
[SAVE ALL USER DATA]
Save the various setting values as a backup in the 
built-in memory of the projector.
1) Press ▲▼ to select [SA
VE ALL USER 
DATA].
2)
 
Press the  button.
▶z The  [SECURITY PASSWORD] screen is 
displayed.
3) Enter a security password and press 
the  button.
4)
 
When the confirmation is displayed, 
select [OK] or [CANCEL], and press 
the  button.
▶z [PROGRESS] is displayed on the screen while 
the data is saved.
[LOAD ALL USER DATA]
Load...

[P IN P] menu
118 - ENGLISH
Settings
Select [P IN P] from the main menu, and select 
the item from the sub-menu.
Refer to “Navigating through the menu” 
(
 page 63) for the operation of the menu screen.
 z After selecting the item, press 
▲▼◀▶ to set.
Using P IN P functions
Locate a separate, small sub screen in the main 
screen to project two images simultaneously.
1) Press 
▲▼ to select [P
 IN P].
2)  
Press the  button.
▶z The  [P IN P] screen is displayed.
3) Press 
▲▼ to select [P
 IN P MODE], 
and...

[P IN P] menu
ENGLISH - 119
Settings
Note
 zThe P

 IN P functions may not be available for some 
signals being input or terminals being selected. 
Refer to “Two window display combination list” 
(
 page 172) for details.
 z The main window setting values are applied to 
adjustment values such as [PICTURE MODE], 
[GAMMA], and [COLOR 

TEMPERATURE].
 zOn the main screen (when no menu is displayed), 
press 
◀▶ to switch the sizes and positions of 
the main window and sub window while P

 IN P is...

[TEST PATTERN] menu
120 - ENGLISH
Settings
[TEST PATTERN] menu
Select [TEST PATTERN] from the main menu.
Refer to “Navigating through the menu” 
(
 page 63) for the operation of the menu 
screen.
 z Press 
◀▶ to switch.
[TEST PATTERN]
Displays the test pattern built-in to the projector.
Settings of position, size, and other factors will not 
be reflected in test patterns. Make sure to display the 
input signal before performing various adjustments.
Press 
◀▶ to switch [TEST PATTERN].
 z
The setting will...