Panasonic Projector PT-DS20KU User Manual

[NETWORK] menu
ENGLISH - 131
Settings
Accessing from the Web browser
1) Start up the Web browser on the computer.
2)  
Enter the IP
  address set on the projector into the URL entry field of the Web browser.
3)
 
Enter the user name and the password.
▶z The factory default setting of the user name is user1 (user rights)/admin1 (administrator rights) and the 
password is panasonic (lower case).
4) Click OK.
▶zThe [Projector status] page is displayed.
Note
 zIf you use a W

eb browser to control the...

[NETWORK] menu
132 - ENGLISH
Settings
▶■Descriptions of items
(1)
(2)
(3)
(4)
(5)
(1) Page tab
Switches pages by clicking it.
(2) [Status] The status of the projector is displayed by clicking 
this item.
(3) [Projector control] The [Projector control] page is displayed by clicking 
this item.
(4) [Detailed set up] The [Detailed set up] page is displayed by clicking 
this item.
(5) [Change password] The [Change password] page is displayed by clicking 
this item.
▶■[Projector status] page
Click [Status] →...

[NETWORK] menu
ENGLISH - 133
Settings
▶■Error information page
When [Error (Detail)] or [Warning (Detail)] is displayed in the self-diagnosis display of the [Projector status] 
screen, click it to display the error/warning details.
▶z
The projector may go into the standby status to protect the projector depending on the contents of the 
error

.
[OK]: Normal opera\Ation[FA\fLED]: O\b\burren\be of \Atrouble
[WARN\fNG]: Warning
▶zDescription of problem occurrence [F AILED]:
Parameter
Description
[MAIN CPU...

[NETWORK] menu
134 - ENGLISH
Settings
ParameterDescription
[AROUND LAMP TEMP. SENSOR] There is a problem with the sensor used to detect exhaust air 
temperature. Consult your dealer.
[BATTERY] The battery replacement is required. Consult your dealer.
[LENS MOUNTER] There is a problem in the lens mounter. Consult your dealer.
[BRIGHTNESS SENSOR] There is a problem with the luminance sensor. If the problem is not 
corrected by turning off the power and turning it on again, consult 
your dealer.
[ANGLE...

[NETWORK] menu
ENGLISH - 135
Settings
▶■[Access error log] page
Click [Status] → [Access error log].
The error log on the WEB server is displayed such as access to the pages that do not exist or access with 
unauthorized user names or passwords.
▶■[Access log] page
Click [Status] → [Access log].
The log such as user name accessed to the WEB control page, accessed IP
 address, accessed time is 
displayed.
Note
 z [Access error log]/[Access log] will display the recent few thousand accesses/requests. May...

[NETWORK] menu
136 - ENGLISH
Settings
▶■[Basic control] page
Click [Projector control] → [Basic control].
(1)
(2)
(4)
(5) (3)
(1) [POWER]
Switches the power on/off.
(2) [SHUTTER] Switches between use or not use of the shutter 
function.
(3) [OSD] Switches between on (display)/off (no display) of the 
on-screen display function.
(4) [SYSTEM] Switches the system method.
(5) [INPUT SELECT] Switches the input signal.
▶■[Detail control] page
Click [Projector control] → [Detail control].
(7)
(8)
(9)
(10)
(2)...

[NETWORK] menu
ENGLISH - 137
Settings
▶■[Network config] page
Click [Detailed set up] → [Network config].
▶z
Click [Network config] to display the [CAUTION!] screen.
▶zClick [Next] to display the current settings.
▶zClick [Change] to display the following setting change screen.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(1) [PROJECTOR NAME]
Enter the name of the projector. Also enter the host 
name if it is required when using a DHCP server, etc.
(2) [DHCP ON]/[DHCP OFF] To enable the DHCP client function, set to...

[NETWORK] menu
138 - ENGLISH
Settings
▶■[Adjust clock] page
Click [Detailed set up] → [Adjust clock].
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(1) [Time Zone]
Selects the time zone. 
(2) [Set time zone] Updates the time zone setting.
(3) [NTP SYNCHRONIZATION] Set to [ON] to adjust the date and time automatically.
(4) [NTP SERVER NAME] Enter the IP address or server name of the NTP 
server when you set to adjust the date and time 
manually.
(To enter the server name, the setup of the DNS 
server is required.)
(5)...

[NETWORK] menu
ENGLISH - 139
Settings
▶■[E-mail set up] page
E-mail address set in advance for use when there is a problem or when the usage time of a lamp reaches a 
set value.
E-mail can be sent to (maximum two locations).
Click [Detailed set up] → [E-mail set up].
(1)
(2)
(3)
(4)
(5)
(6)
(1) [ENABLE]
Select [Enable] to use the E-mail function.
(2) [SMTP SERVER NAME] Enter the IP address or the server name of the E-mail 
server (SMTP). To enter the server name, the DNS 
server settings are required....

[NETWORK] menu
140 - ENGLISH
Settings
▶■[E-mail set up] page (continued)
(3)
(2)
(1)
(1) [E-MAIL ADDRESS 2]
Enter the E-mail address to be sent when two E-mail 
addresses are to be used.
Leave it blank when two E-mail addresses are not to 
be used.
(2) Settings of the conditions to send E-mail Select the conditions to send E-mail to the second 
E-mail address.
[MAIL CONTENTS]: Select either [NORMAL] or [SIMPLE].
[ERROR]:  An E-mail message is sent when an error 
occurred in the self-diagnosis.
[LAMP1...