Panasonic Projector PT-DS20KU User Manual

[SIGNAL LIST] menu
ENGLISH - 121
Settings
Select [SIGNAL LIST] from the main menu.
Refer to “Navigating through the menu” 
(
 page 63) for the operation of the menu 
screen.
▶■ Registered signal status
▶z
A name can be set for each sub memory 
(
 page 123).
▶z Memory number: 

A1 (1-2)
Sub memory number
When the address number (A1, A2, ... H7, H8) 
is registered
Registering a signal to the list
After a new signal is input and the  button 
on the remote control or the control panel is pressed, 
the...

[SIGNAL LIST] menu
122 - ENGLISH
Settings
Protecting the registered data
1) Press ▲▼◀▶  to select the signal to 
protect.
2)
 
Press the  button.
▶z The  [REGISTERED SIGNAL STATUS] screen 
is displayed.
3) Press the  button.
▶z The  [REGISTERED SIGNAL SETUP] screen is 
displayed.
4) Press  ▲▼ to select [LOCK].
5)  
Press  ◀▶ to switch [LOCK].
▶z
The setting will change as follows each time 
you press the button.
[OFF][ON]
[OFF]
The signal is not protected.
[ON] The signal is protected.
Note
 z When...

[SIGNAL LIST] menu
ENGLISH - 123
Settings
Managing the sub memory 
list
The projector has a sub memory function that can 
register the multiple image adjustment data, even if it 
is recognized as the same signal by the frequency or 
format of the synchronization signal source.
Use this function when you need to adjust the picture 
quality such as switching of the aspect ratio or white 
balance by the same synchronization signal source. 
The sub memory includes all the data that can be 
adjusted for each...

[SECURITY] menu
124 - ENGLISH
Settings
[SECURITY] menu
Select [SECURITY] from the main menu, and 
select the item from the sub-menu.
Refer to “Navigating through the menu” 
(
 page 63) for the operation of the menu 
screen.
 z When the projector is used for the first time
Initial password: Press 
▲▶▼◀▲▶▼◀ in 
order

, and press the  button.
 zAfter selecting the item, press 
▲▼◀▶ to set.
Attention
 z
When you select the 

[SECURITY] from the main 
menu and press the  button, entering a 
password is...

[SECURITY] menu
ENGLISH - 125
Settings
[DISPLAY SETTING]
Overlap the security message (text or image) over the 
projecting image.
1) Press ▲▼ to select [DISPLA
Y 
SETTING].
2)
 
Press  ◀▶ to switch [DISPLA

Y 
SETTING].
▶z The setting will change as follows each time 
you press the button.
[OFF][TEXT][USER 
LOGO]
[OFF] The text display is disabled.
[TEXT] The text display is enabled.
[USER 
LOGO] The picture registered by the user is 
projected.
Note
 z T

o create the image for [USER LOGO], “Logo...

[SECURITY] menu
126 - ENGLISH
Settings
8) Press ▲▼ to select [POWER 
BUTT ON], [INPUT SELECT BUTTON], 
[MENU BUTTON], [LENS BUTTON], 
[AUTO SETUP BUTTON], [SHUTTER 
BUTTON], or [OTHER BUTTON].
▶z Use the following items to enable/disable 
buttons on the projector body
.
[POWER 
BUTTON] Power standby  button and 
power on <
> button
[INPUT SELECT  BUTTON]  button,  button, 
 button,  button, 
 button, and  
button
*1
[MENU 
BUTTON]  button
[LENS 
BUTTON]  button
[AUTO SETUP  BUTTON]  button
[SHUTTER...

[SECURITY] menu
ENGLISH - 127
Settings
9) Press ◀▶ to switch the item.
▶z
The setting will change as follows each time 
you press the button.
[ENABLE][DISABLE]
[ENABLE]
Enables button operations.
[DISABLE] Disables button operations.
▶zThe following items are available when [SDI1/2 
BUTT

ON] is selected in [INPUT SELECT 
BUTTON] on PT-DZ21KU or PT-DS20KU.
[TOGGLE] Switches between SDI1 and SDI2 
during button operations.
[SDI1] Fixes to SDI1.
[SDI2] Fixes to SDI2.
[DISABLE] Disables button operations....

[NETWORK] menu
128 - ENGLISH
Settings
[NETWORK] menu
Select [NETWORK] from the main menu, and 
select the item from the sub-menu.
Refer to “Navigating through the menu” 
(
 page 63) for the operation of the menu 
screen.
 z After selecting the item, press 
▲▼◀▶ to set.
[NETWORK SETUP]
Perform the initial setting of the network before using 
the network function.
1) Press 
▲▼ to select [NETWORK 
SETUP].
2)
 
Press the  button.
▶z The  [NETWORK SETUP] screen is displayed.
3) Press 
▲▼ to select an item,...

[NETWORK] menu
ENGLISH - 129
Settings
3) Press ▲▼ to select each item, and 
press  ◀▶ to change the setting.
[Art-Net] Sets to [ON] when the Art-Net 
function is used. Sets to [OFF] 
when the Art-Net function is not 
used.
[PORT 
ADDRESS] Enters a port address that the 
projector processes Art-Net.
[START 
ADDRESS] Enters a start address that the 
projector processes Art-Net.
[STORE] Saves the current Art-Net settings.
4) Press 
▲▼ to select [ST
ORE], and 
press the  button.
5)
 
When the confirmation...

[NETWORK] menu
130 - ENGLISH
Settings
Network connections
The projector has a network function, and the following operations are available from the computer using the Web 
control.
 zSetting and adjustment of the projector
 zDisplay of the projector status
 zSetting of E-mail notification
Note
 z A

 LAN cable is required to use the network function.
&RPSXWHU
3URMHFWRU
/$1&DEOHVWUDLJKW /$1&DEOHVWUDLJKW
+XE
 z A Web browser is required to use this function. Confirm that the Web browser can be used...