Panasonic Projector PT-DS20KU User Manual

[DISPLAY OPTION] menu
ENGLISH - 91
Settings
Select [DISPLAY OPTION] from the main menu, 
and select the item from the sub-menu.
Refer to “Navigating through the menu” 
(
 page 63) for the operation of the menu 
screen.
 z After selecting the item, press 
◀▶ to set.
[COLOR MATCHING]
You can correct the color difference between the sets 
when multiple sets are to be used simultaneously.
1) Press 
▲▼ to select [COLOR 
MA TCHING].
2)
 
Press  ◀▶ to switch [COLOR 
MA

TCHING].
▶zThe setting will change as...

[DISPLAY OPTION] menu
92 - ENGLISH
Settings
▶■To use a colorimeter to adjust the 
color matching
Use a colorimeter that can measure chromaticity 
coordinates and luminance to change the colors 
[RED], [GREEN], [BLUE], [CYAN], [MAGENTA], 
[YELLOW], and [WHITE] to desired colors.
▶z Inputting the current luminance and 
chromaticity coordinates
1)
 
Press  ▲▼ to select [COLOR 
MA

TCHING].
2)
 
Press  ◀▶ to select [709MODE] or 
[MEASURED].
3)

 
Press the  button.
▶z The  [709MODE] or [MEASURED MODE]...

[DISPLAY OPTION] menu
ENGLISH - 93
Settings
[SCREEN SETTING] (PT-DZ21KU 
and PT
-

DS20KU only)
Set the screen size.
When changing the aspect of a projected image, 
correct to the optimum image position for the set 
screen. Set as necessary for the screen in use.
▶■ For PT -DZ21KU
1) Press 
▲▼ to select [SCREEN 
SETTING].
2)
 
Press the  button.
▶z The  [SCREEN SETTING] screen is displayed.
3) Press 
◀▶ to switch [SCREEN 
FORMA T].
[16:10][4:3][16:9]
4) Press ▲▼ to select [SCREEN 
POSITION].
5)
 
Press...

[DISPLAY OPTION] menu
94 - ENGLISH
Settings
[AUTO SETUP]
You can set when adjusting a special signal or 
horizontally long (16:9, etc.) signal.
1) Press ▲▼ to select [AUT
O SETUP].
2)  
Press the  button.
▶z The  [AUTO SETUP] screen is displayed.
3) Press 
▲▼ to select an item.
▶■To set [MODE]
4) Select [MODE] in Step 3).
5)  
Press  ◀▶ to switch [MODE].
▶z
The setting will change as follows each time 
you press the button.
[DEFAULT][WIDE][USER]
[DEFAULT]
Standard setting.
[WIDE] Select when an image...

[DISPLAY OPTION] menu
ENGLISH - 95
Settings
[ON]*1/[1]*2
Enables the backup function 
between the DVI-D input and the 
HDMI input.
The input is switched as seamless 
as possible when the same signal is 
input to the primary and secondary 
inputs.
Primary input is fixed to the  terminal, and the secondary 
input is fixed to the  
terminal.
[2]
*2
Enables the backup function 
between the SDI1 input and the 
SDI2 input.
The input is switched as seamless 
a

s possible when the same signal is 
input to the...

[DISPLAY OPTION] menu
96 - ENGLISH
Settings
[RGB IN] (supported during RGB 
signal input only)
Set to match the signal to input to the  
terminal.
1) Press  ▲▼ to select [RGB IN].
2)  
Press the  button.
▶z The  [RGB IN] screen is displayed.
3) Press 
▲▼ to select an item.
▶■To set [RGB1 INPUT SETTING]
4) Select [RGB1 INPUT SETTING] in Step 3).
5) Press 
◀▶ to switch [RGB1 INPUT 
SETTING].
▶z The setting will change as follows each time 
you press the button.
[RGB/YPBPR][Y/C]
[RGB/YPBPR] Select when...

[DISPLAY OPTION] menu
ENGLISH - 97
Settings
[HDMI IN]
Switch the setting when the projector is connected to 
an external device via an HDMI cable and the image 
is not projected correctly.
1) Press ▲▼ to select [HDMI IN].
2)  
Press the  button.
▶z The  [HDMI IN] screen is displayed.
3) Press 
◀▶ to switch [SIGNAL
 LEVEL].
▶zThe setting will change as follows each time 
you press the button.
[AUTO][0-1023][64-940]
[AUTO]
Automatically set the signal level.
[0-1023] Select when the DVI-D terminal 
output...

[DISPLAY OPTION] menu
98 - ENGLISH
Settings
▶■To set [BIT DEPTH]
4) Select [BIT DEPTH] in Step 3).
5)  
Press  ◀▶ to switch [BIT DEPTH].
▶z
The setting will change as follows each time 
you press the button.
[AUTO][12-bit][10-bit]
[AUTO] Automatically select 12 bits or 10 
bits.
[12-bit] Fix to 12 bits.
[10-bit] Fix to 10 bits.
▶■To set [3G-SDI MAPPING]
4) Select [3G-SDI MAPPING] in Step 3).
5)  
Press  ◀▶ to switch [3G-SDI 
MAPPING].
▶z The setting will change as follows each time 
you press the...

[DISPLAY OPTION] menu
ENGLISH - 99
Settings
▶■[INPUT GUIDE]
Set whether to display the input guide (input terminal 
name, signal name, memory number, and [BACKUP 
INPUT STATUS] currently selected) in the position set 
in [OSD POSITION].
 z
The setting will change as follows each time you 
press the button.
[ON][OFF]
▶■ [W ARNING MESSAGE]
You can set the display/hide of the warning message.
 z
The setting will change as follows each time you 
press the button.
[ON][OFF]
[BACK COLOR]
Set the color of the...

[DISPLAY OPTION] menu
100 - ENGLISH
Settings
▶■To set [PC CORRECTION]
To use the [PC CORRECTION] function, an optional 
upgrade kit (Model No.: ET-UK20) is required. To 
purchase the product, consult your dealer.
4) Select [PC CORRECTION] in Step 3).
5)  
Press  ◀▶ to switch.
▶z
The setting will change as follows each time 
you press the button.
[ON][OFF]
[ON]*1Use a computer to correct the 
brightness and color unevenness of 
the entire screen.
[OFF] A computer cannot be used to 
correct.
*1: Advanced...