Panasonic Projector PT-DS20KU User Manual

Remote control operation
ENGLISH - 61
Basic Operation
Using the STATUS function
You can display the status of the projector.
 button
Press the  button on the remote 
control.
▶zThe  [STATUS] screen is displayed.
Note
 z This can be displayed from the [PROJECT

OR 
SETUP] menu → [STATUS] (
 page 112).
Using the Automatic setup 
function
The automatic setup function can be used to 
automatically adjust the resolution, clock phase, and 
picture position when analog RGB signals consisting 
of bitmap images...

Remote control operation
62 - ENGLISH
Basic Operation
Displaying the internal test 
pattern
The projector has eight types of internal test patterns 
to check the condition of the set. To display test 
patterns, perform the following steps.
 button
1) Press the  button on the 
remote control.
2)
 
Press the  ◀▶ button to select the test 
pattern.
Note 
 z Setting is also available from the [TEST

 PATTERN] 
menu (
 page 120).
 z Settings of position, size, and other factors will 
not be reflected in test...

Menu navigation
ENGLISH - 63
Settings
Menu navigation
Navigating through the menu
▶■Operating procedure
 button
1) Press the  button on the 
remote control or control panel.
▶z
The  [MAIN MENU] screen is displayed.
(17(5
0$,10(18
3,&785(
326,7,21
$9$1&(0(18
,63/$

Menu navigation
64 - ENGLISH
Settings
▶■To reset adjustment values to the 
factory default
If the  button on the remote control is 
pressed, the values adjusted in the menu items 
will be restored to the factory default settings.
 button
Press the  button on the 
remote control.

&/2&.3+$6(
$-867
Note
 zY

ou cannot reset all the settings to the factory 
default at a time.
 z T

o reset all the settings adjusted in the sub-menu 
item to the factory default at a time, perform 
initialization from the...

Menu navigation
ENGLISH - 65
Settings
Sub-menu
The sub-menu of the selected main menu item is 
displayed, and you can set and adjust items in the 
sub-menu.
▶■[PICTURE] 
Sub-menu item Factory 
default Page
[PICTURE MODE]
[STANDARD]*167
[CONTRAST] [0] 68
[BRIGHTNESS] [0] 68
[COLOR] [2]
*168
[TINT] [–2] 68
[COLOR TEMPERATURE] [DEFAULT] 68
[GAMMA] [DEFAULT] 70
[SYSTEM DAYLIGHT VIEW] [OFF] 70
[SHARPNESS] [8] 70
[NOISE REDUCTION] [2] 71
[DYNAMIC IRIS] [2] 71
[SYSTEM SELECTOR] [YP
BPR]*172
*1: Depends on the...

Menu navigation
66 - ENGLISH
Settings
▶■[DISPLA Y OPTION] 
Sub-menu item Factory 
default Page
[COLOR MATCHING] [OFF] 91
[LARGE SCREEN 
CORRECTION] [OFF] 92
[SCREEN SETTING]
*1— 93
[AUTO SIGNAL] [OFF] 93
[AUTO SETUP] — 94
[BACKUP INPUT SETTING] — 94 [RGB IN] — 96
[DVI-D IN] — 96
[HDMI IN] — 97
[SDI IN]
*1— 97
[ON-SCREEN DISPLAY] — 98
[BACK COLOR] [BLUE] 99
[STARTUP LOGO] [DEFAULT 
LOGO] 99
[UNIFORMITY] — 99
[SHUTTER SETTING] — 100
[FREEZE] — 100
[WAVEFORM MONITOR] [OFF] 100
[CUT OFF] — 101
*1: PT-DZ21KU...

[PICTURE] menu
ENGLISH - 67
Settings
Select [PICTURE] from the main menu, and 
select the item from the sub-menu.
Refer to “Navigating through the menu” 
(
 page 63) for the operation of the menu 
screen.
 z After selecting the item, press 
▲▼◀▶ to set.
[PICTURE MODE]
You can switch to the desired picture mode suitable 
for the image source and the environment in which 
the projector is used.
1) Press 
▲▼ to select [PICTURE MODE].
2)  
Press  ◀▶.
▶z
The  [PICTURE MODE] individual adjustment 
screen is...

[PICTURE] menu
68 - ENGLISH
Settings
[CONTRAST]
You can adjust the contrast of the colors.
1) Press ▲▼ to select [CONTRAST].
2)  
Press  ◀▶ or the  button.
▶z
The  [CONTRAST] individual adjustment screen 
is displayed.
3) Press ◀▶ to adjust the level.
Operation Adjustment Range
Press  ▶. Brightens the screen 
and makes the color 
of image deeper. Maximum 
value +31
Press  ◀. Darkens the screen 
and makes the color 
of image lighter. Minimum 
value –31
Attention
 z Adjust [BRIGHTNESS] first when you need...

[PICTURE] menu
ENGLISH - 69
Settings
▶■To adjust desired white balance
4) Select [USER1] or [USER2] in Step 3).
5)  
Press the  button.
▶z The  [COLOR TEMPERATURE] screen is 
displayed.
6) Press  ▲▼ to select [WHITE 
BALANCE].
7)
 
Press the  button.
▶z The  [WHITE BALANCE] screen is displayed.
8) Press 
▲▼ to select [WHITE BALANCE 
HIGH] or [WHITE BALANCE LOW].
9)
 
Press the  button.
▶z The  [WHITE BALANCE HIGH] screen or the 
[WHITE BALANCE LOW] screen is displayed.
10) Press  ▲▼ to select [RED],...

[PICTURE] menu
70 - ENGLISH
Settings
[GAMMA]
Switch gamma mode.
1) Press ▲▼ to select [GAMMA].
2)  
Press  ◀▶ or the  button.
▶z
The  [GAMMA] individual adjustment screen is 
displayed.
3) Press  ◀▶ to switch the [GAMMA].
▶z
The setting will change as follows each time 
you press the button.
[DEFAULT]*1[USER1]
[2.8]
[USER2]
[DICOM SIM.]
(0.1 increments)
[1.0]
[2.0][1.8]
*1: When [PICTURE MODE] is set to [DYNAMIC], [USER], or 
[DICOM SIM.], [DEF
AULT] cannot be selected.
Note
 zDICOM is an abbreviation of...