Panasonic Network Camera Wv Sfv481 Operating Instructions

•QVGA, VGA, 320x180, 640x360, 320x320, and 640x640: 64kbps - 4096kbps*
• 800x600: 128kbps* - 4096kbps*
• 1280x960, 1280x720 and 1280x1280: 256kbps* - 8192kbps*
• 1920x1080 and 1600x1200: 512kbps* - 14336kbps*
• 2048x1536: 1024kbps* - 24576kbps*
• 2560x1920 and 2560x1440: 1536kbps* - 24576kbps*
• 2048x2048: 1536kbps* - 24576kbps*
• 2816x2816: 2048kbps* - 24576kbps*
• 2992x2992: 3072kbps* - 30720kbps*
When “VBR” is selected for “Transmission priority”
• QVGA, VGA, 320x180, 640x360, 320x320, and 640x640:...

It is possible to fix the port number of the router used for H.264 image transmission via the Internet by
setting “Unicast port (MANUAL)” ( ®page 159). Refer to the operating instructions of the router in use.
• Multicast:  Unlimited number of users can access a single camera concurrently. Complete the entry field
of  “Multicast address ”,  “Multicast port ” and  “Multicast TTL/HOPLimit ” when transmitting H.264 images with
multicast. Refer to page 7 for further information about the maximum concurrent...

IMPORTANT•When transmitting an H.264 image via a network, the transmitted image sometimes may not be
displayed depending on the settings of a proxy server or a firewall. In this case, refer to the network
administrator.
• When two or more network interface cards are installed on the PC in use, the network interface
card( s) not used for receiving images should be invalidated when displaying images using the multicast
port.
*1 It is necessary to designate the unicast port number when “Unicast port...

11.4  Configure the settings relating to the camera
operations [Cam. Function] Click the [Cam. Function] tab on the “Image/Audio” page. ( ®page 56, page 58)
Configure the settings relating to camera operations.
IMPORTANT
•This function is available when a  “Image capture mode ” setting containing  Quad PTZ or Single PTZ is
selected. ( ®page 9) Specifically, the following options can be selected for “Image capture mode”.
Quad PTZ/ Single PTZ/ 8M Fisheye + Quad PTZ/ 4M Fisheye + Quad PTZ/ Quad stream
[Self...

•When Single PTZ is displayed, preset position 1 is used for its home position. When Quad PTZ is
displayed, preset positions 1, 2, 3, and 4 are used for the home positions of the corresponding screens
(1, 2, 3, and 4).
[Self return time]
Select a waiting time  (amount of time until the camera starts the selected operation after the end of the manual
operations) from the following.
10s/ 20s/ 30s/ 1min/ 2min/ 3min/ 5min/ 10min/ 20min/ 30min/ 60min
• Default:  1minOperating Instructions105
11 Configure the...

11.5  Configure the settings relating to image adjust,
back focus, preset position, privacy zone and VIQS
[Image/Position] Click the [Image/Position] tab on the “Image/Audio” page. ( ®page 56, page 58)
When the [Setup>>] button of each setting item is clicked, the detailed settings menu will be displayed in a
newly opened window. The detailed settings can be configured while monitoring images displayed on the
[Image/Position] tab.
The settings relating to image adjust, back focus, preset positions,...

[Privacy zone]
Click the [Setup>>] button to display the setup menu that can configure the settings relating to the privacy
zone. The setup menu will be displayed. ( ®page 121)
[VIQS]
Click the [ Setup>>] button to display the setup menu that can configure the settings relating to VIQS. The setup
menu will be displayed. ( ®page 126)
11.5.1  Configure the settings relating to image quality (“Image
adjust” setup menu) Click the [Setup>>] button of “Image adjust” on the [Image quality] tab of the...

[Wide dynamic range]
Select “On” or “Off” to determine whether or not to activate the wide dynamic range function.
This function compensates brightness so that it produces clearer images even if objects have various
illumination intensities.
• On:  The wide dynamic range will work.
• Off:  The wide dynamic range will not work.
• Default:  Off
108Operating Instructions
11 Configure the settings relating to images and audio [Image/Audio]   

Note•When the wide dynamic range function is activated, noise may be increased in the dark area of the
object.
[Adaptive black stretch]
Select  “On” or “Off”  to determine whether or not to activate the darkness compensation function. The darkness
compensation function can make darker parts of images brighter by digital image processing.
• On:  Activates the darkness compensation function.
• Off:  Deactivates the darkness compensation function.
• Default:  Off
IMPORTANT
•When “On” is selected for...

IMPORTANT•When a value with an interval longer than “Max.1/30s” (Max.2/30s/ Max.4/30s/ Max.6/30s/ Max.
10/30s / Max.16/30s ) is selected for  “Maximum shutter ”, the frame rate may become lower. In this case,
the transmission interval configured for “Refresh interval” of H.264 may become longer than the set
value. Noise or white dots (blemishes) may sometimes appear.
Note
•When “Max.16/30s” is selected, for example, sensitivity will automatically be increased up to x16.
• When “Off” is selected for...