Panasonic Network Camera Wv Sfv481 Operating Instructions

Image capture size: 320x180Capacity of
SD memory cardImage quality0 Super fine1 Fine23464 GB921,6001,049,6001,126,4001,152,0001,228,80032 GB460,800524,800563,200576,000614,40016 GB230,400262,400281,600288,000307,2008 GB115,200131,200140,800144,000153,6004 GB57,60065,60070,40072,00076,8002 GB28,80032,80035,20036,00038,400Capacity of
SD memory cardImage quality5 Normal6789 Low64 GB1,459,2001,510,4001,587,2001,689,6001,715,20032 GB729,600755,200793,600844,800857,60016 GB364,800377,600396,800422,400428,8008...

10.5  Configure the directory of the PC that images
will be downloaded to [Log] Click the [Log] tab on the “Basic” page. ( ®page 56, page 58)
The directory of the PC that images recorded on the SD memory card will be downloaded to can be configured
in this section.
Alarm
The settings related to the directory of the PC that recorded images of when alarms occur will be downloaded
to can be performed.
[Name of the destination directory for downloaded images]
Enter the name of the destination directory to...

Note•When “H.264(1)” or “H.264(2)” is selected for “Recording format”, “FTP error” is unavailable.
[Permission level of viewing logs]
User level settings for viewing and operating “Log” on the “Live” page can be configured.
• 1. Level 1 only:  only Level 1 users can view and operate the “Log”.
• 2. Level 2 or higher:  only Level 1 and Level 2 users can view and operate the “Log”.
• 3. All users : all users can view and operate the  “Log”. However, only Level 1 and Level 2 users can delete
logs, and only...

11   Configure the settings relating to images and
audio [Image/Audio]
The settings relating to JPEG and H.264 images such as the settings of image quality, audio, etc. can be
configured on this page.
The “Image/Audio” page has the [JPEG/H.264] tab *1
, the [Image quality] tab, and the [Audio] tab.
*1 When “Quad stream” is selected for “Image capture mode”, the [H.264] tab is displayed.
11.1  Configure the settings relating to the image
capture mode [JPEG/H.264] Click the [JPEG/H.264] tab on the...

11.2  Configure the settings relating to JPEG images
[JPEG/H.264] Click the [JPEG/H.264] tab on the “Image/Audio” page. ( ®page 56, page 58)
IMPORTANT
•When “Quad stream” is selected for “Image capture mode”, JPEG image settings are unavailable.
• When “9M Fisheye” is selected for “Image capture mode”, “JPEG(2)” settings are unavailable.
• When “On(NTSC)” or “On(PAL)” is selected for “Monitor out”, JPEG image settings are unavailable.
“Live” page (Initial display)
Configure the settings relating to the...

[Image quality]
Select the image quality of JPEG images for each image capture size.
0 Super fine/ 1 Fine/ 2/ 3/ 4/ 5 Normal/ 6/ 7/ 8/ 9 Low
• Default:  5 Normal96Operating Instructions
11 Configure the settings relating to images and audio [Image/Audio] 

11.3  Configure the settings relating to H.264 images
[JPEG/H.264] Click the [JPEG/H.264] tab on the “Image/Audio” page. ( ®page 56, page 58)Operating Instructions97
11 Configure the settings relating to images and audio [Image/Audio] 

Configure the settings relating to H.264 image such as “Max bit rate  (per client) ”,  “Image capture size ”,  “Image
quality”, etc. in this section. Refer to page 95 for the settings relating to JPEG images.98Operating Instructions
11 Configure the settings relating to images and audio [Image/Audio]   

H.264(1)/H.264(2)[H.264 transmission]
Select “On” or “Off” to determine whether or not to transmit H.264 images.
When “Quad stream” is selected for “Image capture mode”, “H.264 transmission” is always set to “On” and
these selections cannot be selected.
• On:  Transmits H.264 images.
• Off:  Does not transmit H.264 images.
• Default:  On
Note
•When the “Image capture mode” type is “2 Monitor”,“H.264(1)” displays the Fisheye image, and “H.
264(2)” displays either the Panorama, Double Panorama, or Quad PTZ...

•Advanced VBR : H.264 images are transmitted at the frame rate specified for  “Frame rate* ” while the image
quality is controlled so that the average transmission rate during the period specified for “Control time
period” becomes the bit rate selected for “Max bit rate (per client)*”.
• Default:  Frame rate
Note
•When “Frame rate” or “Advanced VBR” is selected for “Transmission priority”, number of users who
can access the camera may be limited more (may become less than 10).
[Frame rate*]
Select a...