Panasonic LCD Projector Pt Rz670 Operating Instructions

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 101
4) Press qw to switch the item.
 fThe items will switch each time you press the button.
[OFF] Does not rotate the screen.
[CLOCKWISE] Rotates the screen by 90° clockwise.
[COUNTERCLOCKWISE] Rotates the screen by 90° counterclockwise.
Setting [OSD DESIGN]
Set the color of the menu screen (OSD).
1) Press as to select [ON-SCREEN DISPLAY].
2)  
Press the  button.
 f The  [ON-SCREEN DISPLAY] screen is displayed.
3) Press  as to select [OSD DESIGN].
4)...

Chapter 4 Settings — [DISPLAY OPTION] menu
102 - ENGLISH
Setting [WARNING MESSAGE]
Set the display/hide of the warning message.
1) Press as to select [ON-SCREEN DISPLAY].
2)  
Press the  button.
 f The  [ON-SCREEN DISPLAY] screen is displayed.
3) Press  as to select [WARNING MESSAGE].
4)  
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[ON] Displays the warning message.
[OFF] Hides the warning message.
[CLOSED CAPTION SETTING] (for NTSC or 480i YCBCR signal input...

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 103
 fWhen the correction of [KEYST ONE] is large, edges of characters may be lost. (Only for PT- RW630)
[IMAGE ROTATION]
Set whether to rotate the input image when projecting.
1) Press as to select [IMAGE ROTATION].
2)  
Press 
 qw to select an item.
 fThe items will switch each time you press the button.
[OFF] Projects the input image without rotating.
[CLOCKWISE] Rotates the input image by 90° clockwise and project it.
[COUNTERCLOCKWISE] Rotates the...

Chapter 4 Settings — [DISPLAY OPTION] menu
104 - ENGLISH
4) Press qw to adjust the level.
Item Operation AdjustmentRange of adjustment
[VERTICAL] Press w.
The lower-side color becomes 
pale, or the upper-side color 
becomes dark.
-127 - 127
Press q.
The upper-side color becomes 
pale, or the lower-side color 
becomes dark.
[HORIZONTAL] Press w.
The left-side color becomes pale, 
or the right-side color becomes 
dark.
Press q. The right-side color becomes 
pale, or the left-side color 
becomes dark....

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 105
2) Press the  button.
 fThe  [SHUTTER SETTING]  screen is displayed.
3) Press as to select [STARTUP].
4)  
Press 
 qw to switch the item.
[OPEN] Starts projection with the shutter function disabled (shutter: open) when the power is turned on.
[CLOSE] Starts projection with the shutter function enabled (shutter: closed) when the power is turned on.
[FREEZE]
Pause the projected image temporarily regardless of the playback of the external device.
1)...

Chapter 4 Settings — [DISPLAY OPTION] menu
106 - ENGLISH
1) Select “Select line (luminance)” on the waveform monitor.
2)  
Adjust black level.
 f Use [BRIGHTNESS] in the on-screen menu [PICTURE] to adjust the black level 0   % of the video signal to the 0   % position of the 
waveform monitor.
3) Adjust white level.
 f Use [CONTRAST] in the on-screen menu [PICTURE] to adjust the white level 100   % of the video signal to the 100   % position of the 
waveform monitor.
Adjusting red, green, and blue
1) Set...

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 107
[PROJECTOR SETUP] menu
On the menu screen, select [PROJECTOR SETUP] from the main menu, and select an item 
from the sub-menu.
Refer to “Navigating through the menu” (x
  page   67) for the operation of the menu screen.
 fAfter selecting the item, press 

asqw to set.
[PROJECTOR ID]
The projector has an ID number setting function that can be used when mu\
ltiple projectors are used side by side to enable simultaneous 
control or individual control...

Chapter 4 Settings — [PROJECTOR SETUP] menu
108 - ENGLISH
[COOLING CONDITION]
Change the fan control depending on the direction of projection.
Set [COOLING CONDITION] according to the projection direction, but set it to [AUTO] normally. Using the projector with [COOLING 
CONDITION] set incorrectly may shorten the life of the light source.
15°
15° 15°
15°

30°
30°
30°
30°
[VERTICAL UP SETTING]
[FLOOR 
SETTING] [CEILING 
SETTING]
[VERTICAL DOWN SETTING] [PORTRAIT SETTING]
Projection direction
Frontward:...

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 109
Setting [OPERATING MODE]
1) Press as to select [OPERATION SETTING].
2)  
Press the  button.
  
 fThe  [OPERATION SETTING]  screen is displayed.
3) Press as to select [OPERATING MODE].
4)  
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[NORMAL] Set this item when high luminance is required. The estimated runtime is approximately 20   000 hours.
[ECO] Although the luminance is lower than that of [NORMAL], set...

Chapter 4 Settings — [PROJECTOR SETUP] menu
110 - ENGLISH
 fThe [MAX LIGHT  OUTPUT LEVEL] settings are not reset to the factory defaults even when [ALL USER DATA] is executed from the 
[PROJECTOR SETUP] menu → [INITIALIZE] ( x
  page   124).
Setting [LIGHT OUTPUT]
Adjust the brightness of light source.
The [LIGHT OUTPUT] setting is synchronized with the [PROJECTOR SETUP] menu → [LIGHT OUTPUT]. The most recent setting is reflected 
in both items.
1) Press as to select [OPERATION SETTING].
2)  
Press the...