Panasonic LCD Projector Pt Rz670 Operating Instructions

Chapter 4 Settings — [SECURITY] menu
ENGLISH - 131
[SECURITY] menu
On the menu screen, select [SECURITY] from the main menu, and select an item from the sub-
menu.
Refer to “Navigating through the menu” (x
  page   67) for the operation of the menu screen.
 fWhen the projector is used for the first time
Initial password: Press  awsqawsq in order

, and press the  button.
 fAfter selecting the item, press 

asqw to set.
Attention
 fWhen you select the [SECURITY] menu and press the  button, entering a...

Chapter 4 Settings — [SECURITY] menu
132 - ENGLISH
Note
 fThe entered password is displayed with*marks on the screen. fWhen numerical values are used for the security password, the security p\
assword is required to be initialized if the remote control is lost. 
Consult your dealer for the method of initialization.
[DISPLAY SETTING]
Overlap the security message (text or image) over the projecting image.
1) Press  as to select [DISPLAY SETTING].
2)  
Press 
 qw to switch the item.
 fThe items will switch...

Chapter 4 Settings — [SECURITY] menu
ENGLISH - 133
Enabling/disabling any button
1) Press as to select [CONTROL DEVICE SETUP].
2)  
Press the  button.
 f The  [CONTROL DEVICE SETUP] screen is displayed.
3) Press  as to select [CONTROL PANEL] or [REMOTE CONTROL].
4)  
Press the  button.
5)

 
Press 
 as to select [CONTROL PANEL] or [REMOTE CONTROL].
6)
 
Press 
 qw to switch [USER].
7)
 
Press 
 as to select the button item to set.
 fWhen [INPUT  SELECT BUTTON] is selected, press the  button, and then...

Chapter 4 Settings — [SECURITY] menu
134 - ENGLISH
[CONTROL DEVICE PASSWORD CHANGE]
The control device password can be changed.
1) Press as to select [CONTROL DEVICE PASSWORD CHANGE].
2)  
Press the  button.
 f The  [CONTROL DEVICE PASSWORD CHANGE]  screen is displayed.
3) Press asqw to select the text, and press the  button to enter the text.
4)  
Press 
 asqw to select [OK], and press the  button.
 fTo cancel, select [CANCEL].
Attention
 fThe initial password is “AAAA” by the factory default or when...

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 135
[NETWORK] menu
On the menu screen, select [NETWORK] from the main menu, and select an item from the sub-
menu.
Refer to “Navigating through the menu” (x
  page   67) for the operation of the menu screen.
 fAfter selecting the item, press 

asqw to set.
[DIGITAL LINK MODE]
Switch the communication method of the  terminal of the projector.
1) Press  as to select [DIGITAL LINK MODE].
2)  
Press 
 qw to switch the item.
 fThe items will switch each time you...

Chapter 4 Settings — [NETWORK] menu
136 - ENGLISH
7) When the confirmation screen is displayed, press qw  to select [OK], and press the  button.
Note
 f The projector does not support 10BaseT  Full/Half.
When the projector is connected to a twisted-pair-cable transmitter
1) Press as to select [DIGITAL LINK SETUP].
2)  
Press the  button.
 f The  [DIGITAL LINK SETUP] screen is displayed.
3) Press  as to select [DUPLEX(DIGITAL LINK)].
4)  
Press 
 qw to switch the communication method.
 fThe items will...

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 137
[IP ADDRESS]Enter the IP address when you do not use a DHCP server.
[SUBNET MASK] Enter the subnet mask when you do not use a DHCP server.
[DEFAULT GATEWAY] Enter the default gateway address when you do not use a DHCP server.
[STORE] Save the current network settings.
4) Press as to select [STORE], and press the  button.
5)  
When the confirmation screen is displayed, press  qw

 to select [OK], and press the  button.
Note
 f When using a DHCP  server,...

Chapter 4 Settings — [NETWORK] menu
138 - ENGLISH
[DIGITAL INTERFACE BOX]
When the optional Digital Interface Box (Model No.: ET-YFB100G) is connected to the  terminal, the main menu of 
ET- YFB100G is displayed. Refer to the Operating Instructions of ET- YFB100G for details.
Note
 fWhen [EXTRON XTP] is set to [ON], [DIGIT AL INTERFACE BOX] cannot be selected. fThe operation guidance for the “RETURN” button is displayed on the menu screen of the Digital Interface Box.  The projector does not have 
the...

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 139
 rExample of a normal network connection
Computer
Projector
LAN cable (straight) LAN cable (straight) Hub
 fA web browser is required to use network function. Confirm that the web browser can be used beforehand.
Compatible browser: Internet Explorer 7.0/8.0/9.0/10.0/11.0 (Windows OS), Safari 4.0/5.0/6.0/7.0 (Mac OS)
 f Communication with an E-mail server is required to use the E-mail function. Confirm that the E-mail can be used beforehand.
 fUse a LAN...

Chapter 4 Settings — [NETWORK] menu
140 - ENGLISH
 fFor the LAN cable between the twisted-pair-cable transmitter and the projector , use a cable that meets the following criteria:
 gCompatible with CA

T5e or higher
 gShielded type (including connectors)
 gStraight-through
 gSingle wire
 fThe maximum transmission distance between the twisted-pair-cable transmitter and the projector is 100

  m (328'1"). If this distance is 
exceeded, image may be disrupted or a malfunction may occur in LAN...