Panasonic LCD Projector Pt Rz670 Operating Instructions

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 141
Note
 fIf you use a web browser to control the projector , set [WEB CONTROL] to [ON] in [NETWORK CONTROL] ( x   page   137). fDo not perform setting or control simultaneously by starting up multiple\
 web browsers. Do not set or control the projector from multiple 
computers.
 fChange the password first. ( x

  page   153)
 fThe administrator rights allow use of all functions. 

The user rights allow use of [Projector status] (x   page   142),...

Chapter 4 Settings — [NETWORK] menu
142 - ENGLISH
[Projector status] page
Click [Status] → [Projector status].
Display the status of the projector for the following items.
13
14
15 8
1
2
3
4
18 17 16 9
5
6
7 10
11
12
1 [PROJECT
OR TYPE]
Displays the type of the projector.
2
 
[MAIN VERSION]
Displays the firmware version of the projector

.
3
 
[POWER]
Displays the status of the power

.
4
 
[SHUTTER]
Displays the status of shutter function (ON: enabled (closed), 
OFF: disabled (open)).
5

 
[OPERA
 TING...

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 143
Error information page
When [Error (Detail)] or [Warning (Detail)] is displayed in the self-test display of the [Projector status] screen, click it to display the error/
warning details.
 f The projector may go into the standby status to protect the projector de\
pending on the contents of the error

.
1
1 Self-test result display
Displays the item check results.
[OK]:
Indicates that operation is normal.
[F
AILED]:
Indicates that there is a problem....

Chapter 4 Settings — [NETWORK] menu
144 - ENGLISH
 r[WARNING] items
Item Description
[AC POWER] AC input voltage is weak. Use electric wiring that can sufficiently withstand the power 
consumption of the projector.
[LOW-TEMPERATURE] The temperature around the optics module inside the projector is low. Projection cannot 
be started until the optics module becomes warm.
[INTAKE AIR TEMPERATURE] The intake air temperature is high. The projector may be used in an environment where 
the temperature is high,...

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 145
[Mail error log] page
Click [Status] → [Mail error log].
Display E-mail error information if periodic E-mail sending has failed.
Note
 f[Access error log] and [Mail error log] display the recent few thousand accesses/requests.  All information may not be displayed when many 
accesses/requests are made at one time.
 f When [Access error log] and [Mail error log] exceed certain amount, information is erased from the oldest. fCheck [Access error log] and...

Chapter 4 Settings — [NETWORK] menu
146 - ENGLISH
[Detail control] page
Click [Projector control] → [Detail control].
5 4
3
2
1
9
8
7
6
1 Control of the projector
The projector is controlled by clicking the buttons in the same 
way as the buttons on the remote control. After control, the on-
screen display of the projector at the right of the control page is 
updated.
2
 
[SUB MEMOR
 Y]
Switches the sub memory.
3
 
[SYSTEM DA
 YLIGHT VIEW]
Switches to system daylight view settings.
4
 
[FREEZE]
T...

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 147
[Network config] page
Click [Detailed set up] → [Network config].
 fClick [Network config] to display the  [CAUTION!]

 screen.
 fThe current settings are displayed by pressing the [Next] button.
 fClick [Change] to display the setting change screen.
1
2
3
4
5
6
7
8
1 [PROJECT OR NAME]
Enter the name of the projector. Enter the host name if it is 
required when using a DHCP server etc.
2
 
[DHCP
  ON], [DHCP OFF]
To enable the DHCP client function, set to...

Chapter 4 Settings — [NETWORK] menu
148 - ENGLISH
[Adjust clock] page
Click [Detailed set up] → [Adjust clock].
1
2
3
4
5
6
7
1 [Time Zone]
Select the time zone.
2
 
[Set time zone]
Updates the time zone setting.
3

 
[NTP
  SYNCHRONIZATION]
Set to [ON] to adjust the date and time automatically.
4
 
[NTP
  SERVER NAME]
Enter the IP address or server name of the NTP server when 
you set to adjust the date and time manually.
(To enter the server name, the DNS server needs to be 
configured.) 5
 [Date]...

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 149
[E-mail set up] page
When there is a problem or the runtime of the light source reaches the set value, an E-mail can be sent to previously set E-mail addresses (up 
to two addresses).
Click [Detailed set up] → [E-mail set up].
1
2
3
4
5
6
1 [ENABLE]
Select [Enable] to use the E-mail function.
2
 
[SMTP
  SERVER NAME]
Enter the IP address or the server name of the E-mail server 
(SMTP). To enter the server name, the DNS server needs to be 
set up.
3...

Chapter 4 Settings — [NETWORK] menu
150 - ENGLISH
[Authentication set up] page
Set the authentication items when POP authentication or SMTP authentication is necessary to send an E-mail.
Click [Detailed set up] → [Authentication set up].
1
2
3
4
5
6
7
8
1 [Auth]
Select the authentication method specified by your Internet 
service provider
.
2
 
[SMTP
  Auth]
Set when the SMTP authentication is selected.
3
 
[POP
  server name]
Enter the POP server name.
Allowed characters:
Alphanumerics (A - Z, a - z, 0...