Panasonic LCD Projector Pt Rz670 Operating Instructions

Chapter 5 Maintenance — Troubleshooting
ENGLISH - 161
ProblemsPoints to be checked Page
Cannot control the 
projector with Art-Net.
 f Are the connections between the twisted-pair-cable transmitter and the projector or 
an external device correctly done? ―
 f
Is [Art-Net SETUP] set to other than [OFF]? 138
 fAre the [NET], [SUB NET], [UNIVERSE], and [ST

ART ADDRESS] settings correct?138
The DIGITAL LINK input 
image is not displayed.
 f Are the connections between the twisted-pair-cable transmitter and...

Chapter 5 Maintenance — [SELF TEST] indications
162 - ENGLISH
[SELF TEST] indications
Details and measures for the alphanumeric symbols indicated in [SELF TEST] from the [PROJECTOR SETUP] menu → [STATUS] are as 
follows.
Self-test indication Details Measure
U 11 Intake air temperature warning
 fThe operating environment temperature is too 
high. Install the projector in a location with the 
operating environment temperature between 0

  °C 
(32
  °F) and 45   °C (113   °F).
U12
Optical module temperature...

Chapter 5 Maintenance — [SELF TEST] indications
ENGLISH - 163
Self-test indicationDetails Measure
FC8 Light source 2 error
 fIf the display does not clear after switching the 
main power of

f and on, consult your dealer.
FE1 Intake fan 3 error
 fIf the display does not clear after switching the 
main power of

f and on, consult your dealer.
FE2
Phosphor wheel 1 fan error
FE3 Phosphor wheel 2 fan error
FE4 Power intake fan error
FE5 Drive fan error
FE6 Power exhaust fan error
FE7 DMD fan error
FE8...

164 - ENGLISH
Chapter 6 Appendix
This chapter describes specifications and after-sales service for the projector.   

Chapter 6 Appendix — Technical information
ENGLISH - 165
Technical information
PJLink protocol
The network function of this projector supports the PJLink class 1, and \
the PJLink protocol can be used to perform projector setting and 
projector status query operations from a computer.
Control commands
The following table lists the PJLink protocol commands that can be used \
to control the projector.
 fx characters in tables are non-specific characters.
Command Control details Parameter / return string...

Chapter 6 Appendix — Technical information
166 - ENGLISH
PJLink security authentication
The password used for PJLink is the same as that of the password set for\
 web control.
When using the projector without security authentication, do not set a p\
assword for web control.
 fFor specifications related to PJLink, refer to the website of Japan Business Machine and Information System Industries  Association.
URL

 http://pjlink.jbmia.or.jp/english/
Using Art-Net function
Since the network function of the...

Chapter 6 Appendix — Technical information
ENGLISH - 167
Channel Control detailsPerformanceParameter Default value Remark
11 Lock Operation not available
0
- 127
0When “Operation not 
available” is set, operations 
of all channels become 
unacceptable.
Operation available
128
- 255
Note
 fIf the projector is operated with the remote control or on the control p\
anel, or by the control command while controlling the projector using 
the 
Art-Net function, the setting of the DMX controller or computer...

Chapter 6 Appendix — Technical information
168 - ENGLISH
 rError response
String DetailsTermination 
symbol
Message “ERR1” Undefined control command
(CR)
0x0d
“ERR2” Out of parameter range
“ERR3”
Busy state or no-acceptable period
“ERR4” Timeout or no-acceptable period
“ERR5” Wrong data length
“ERRA” Password mismatch
Data length 4
  bytes ―1
  byte
When web control administrator rights password is not set (Non-protect mode)
Connecting
1)  
Obtain the IP
  address and port number (Initial set value =...

Chapter 6 Appendix — Technical information
ENGLISH - 169
 rError response
String DetailsTermination 
symbol
Message “ERR1” Undefined control command
(CR)
0x0d
“ERR2” Out of parameter range
“ERR3”
Busy state or no-acceptable period
“ERR4” Timeout or no-acceptable period
“ERR5” Wrong data length
“ERRA” Password mismatch
Data length 4
  bytes ―1
  byte
/ terminal
The / terminal of the projector conforms with RS-232C so that the projector can be connected to and controlled 
from a computer .
Connection...

Chapter 6 Appendix — Technical information
170 - ENGLISH
Pin assignments and signal names
D-Sub 9-pin (female)Outside view Pin No.
Signal name Details
(9) (6)
(5) (1)
(1)
―NC
(2) TXDTransmitted data
(3) RXDReceived data
(4) ―NC
(5) GNDEarth
(6) ―NC
(7) CTS
Connected internally
(8) RTS
(9) ―NC
D-Sub 9-pin (male)
Outside view Pin No.
Signal name Details
(6) (9)
(1) (5)
(1)
―NC
(2) RXDReceived data
(3) TXDTransmitted data
(4) ―NC
(5) GNDEarth
(6) ―NC
(7) RTS
Connected internally
(8) CTS
(9) ―NC...