Panasonic LCD Projector Pt Rz670 Operating Instructions
Here you can view all the pages of manual Panasonic LCD Projector Pt Rz670 Operating Instructions. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 1
Thank you for purchasing this Panasonic product. ■This manual is common to all the models regardless of suffixes of the Model No. zfor India BD/BDJ: Black model, the standard zoom lens supplied L BD/LBDJ: Black model, the lens sold separately WD: White model, the standard zoom lens supplied LWD: White model, the lens sold separately zfor T aiwan BT: Black model, the standard zoom lens supplied z for other countries or regions B : Black model, the standard zoom lens supplied L B: Black...
Page 2
2 - ENGLISH Read this first! Read this first! WARNING:THIS APPARATUS MUST BE EARTHED. WARNING:To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or moisture. This device is not intended for use in the direct field of view at visual display workplaces. To avoid incommoding reflexions at visual display workplaces this device must not be placed in the direct field of view. The equipment is not intended for used at a video workstation in complia\ nce...
Page 3
ENGLISH - 3 Read this first! Notice on laser (for USA and Canada) This projector is the Class 3R laser product that complies with IEC 60825-1:2007. 529 529For North America “Complies with 21 CFR Parts 1040.10 and 140.11 except for deviations pursuant to Laser Notice No.50 dated june 24.2007” IEC 60825-1:2007 LASER RADIATION AVOID DIRECT EYE EXPOSURE CLASS 3R LASER PRODUCT WAVE LENGTH:448-462nm MAXIMUM OUTPUT:248mW PULSE DURATION:1.1ms IEC 60825-1:2007 RAYONNEMENT LASER EXPOSITION DIRECTE...
Page 4
4 - ENGLISH Read this first! CAUTION (North/Middle/South America/Taiwan) This equipment is equipped with a three-pin grounding-type power plug. D\ o not remove the grounding pin on the power plug. This plug will only fit a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the \ outlet, contact an electrician. Do not defeat the purpose of the groundi\ ng plug. Do not remove WARNING (USA and Canada) fNot for use in a computer room as defined in the...
Page 5
ENGLISH - 5 Read this first! IMPORTANT: THE MOLDED PLUG (U.K. only) FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY. This appliance is supplied with a molded three pin mains plug for your safety and convenience. A 13 amp fuse is fitted in this plug. Should the fuse need to be replaced, please ensure that the replacement fuse has a rating of 13 amps and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark or the BSI mark on the body of the fuse. If the plug contains a...
Page 6
6 - ENGLISH Read this first! WARNING: rPOWER The wall outlet or the circuit breaker shall be installed near the equipment and shall be easily accessible when problems occur. If the following problems occur, cut off the power supply immediately. Continued use of the projector in these conditions will result in fire or electric shock. fIf foreign objects or water get inside the projector , cut off the power supply. fIf the projector is dropped or the cabinet is broken, cut of f the power supply. fIf...
Page 7
ENGLISH - 7 Read this first! WARNING: Do not cover the air intake/exhaust ports or place anything within 500 mm (20") of them. Doing so will cause the projector to overheat, which can cause fire or damage to the projector. fDo not place the projector in narrow , badly ventilated places. fDo not place the projector on cloth or papers, as these materials could \ be drawn into the air intake port. Do not look at or place your skin into the light emitted from the lens while the projector is being...
Page 8
8 - ENGLISH Read this first! WARNING: rACCESSORIES Do not use or handle the batteries improperly, and refer to the following. Failure to observe this will cause burns, batteries to leak, overheat, explode or catch fire. fDo not use unspecified batteries. fDo not use chargeable batteries. fDo not disassemble dry cell batteries. fDo not heat the batteries or place them into water or fire. fDo not allow the + and – terminals of the batteries to come into contact with metallic objects such as...
Page 9
ENGLISH - 9 Read this first! CAUTION: rPOWER When disconnecting the power cord, be sure to hold the power plug and power connector . If the power cord itself is pulled, the lead will become damaged, and fire, short-circuits or serious electric shocks will result. When not using the projector for an extended period of time, disconnect the power plug from the wall outlet. Failure to do so may result in fire or electric shock. Disconnect the power plug from the wall outlet before carrying out any...
Page 10
10 - ENGLISH Read this first! To remove the battery Remote Control Battery 1. P ress the guide and lift the cover. (ii)(i) 2. Remove the batteries.