Panasonic LCD Projector Pt Rz670 Operating Instructions

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 121
2) Press the  button.
 fThe  [STATUS] screen is displayed.
3) Press  qw to switch the pages.
 fThe page will change each time you press the button.
[PROJECTOR TYPE] Displays the projector type and serial number of the projector.
[PROJECTOR RUNTIME] Displays the runtime of the projector.
[LIGHT RUNTIME] Displays the runtime of the light source 1 and 2.
[MAIN/SUB VERSION] Displays the main and sub versions of the firmware of the projector .
[INTAKE...

Chapter 4 Settings — [PROJECTOR SETUP] menu
122 - ENGLISH
2) Press qw to switch the item.
 fThe items will switch each time you press the button.
[DISABLE] Disables the No signal shut-off function.
[10MIN.] - [90MIN.] Sets the time in increments of 10 minutes.
[REMOTE2 MODE]
You can set the  terminal.
1) Press as to select [REMOTE2 MODE].
2)  
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[DEFAULT] The pin assignment of the  terminal is used by the factory default...

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 123
2) Press the  button.
 fThe  [DATE AND TIME] screen is displayed.
3) Press  as to select [ADJUST CLOCK].
4)  
Press the  button.
 f The  [ADJUST CLOCK] screen is displayed.
5) Press  as to select an item, and press qw to set the local date and time.
6)  
Press 
 as to select [APPLY], and press the  button.
 fThe setting of the date and time will be completed.
Setting the date and time automatically
1) Press  as to select [DATE AND TIME].
2)...

Chapter 4 Settings — [PROJECTOR SETUP] menu
124 - ENGLISH
4) When the confirmation screen is displayed, press qw  to select [OK], and press the  button.
 f[PROGRESS] is displayed while saving data.
Note
 fData set from the computer application is not included in [ALL  USER DATA].
[LOAD ALL USER DATA]
Load the various setting values saved as a backup in the built-in memory\
 of the projector.
1) Press as to select [LOAD ALL USER DATA].
2)  
Press the  button.
 f The  [SECURITY PASSWORD] screen is...

Chapter 4 Settings — [P IN P] menu
ENGLISH - 125
[P IN P] menu
On the menu screen, select [P IN P] from the main menu, and select an item from the sub-
menu.
Refer to “Navigating through the menu” (x
  page   67) for the operation of the menu screen.
 fAfter selecting the item, press 

asqw to set.
Using P IN P function
Locate a separate, small sub screen in the main screen to project two im\
ages simultaneously.
1) Press  as to select [P IN P MODE].
2)  
Press the  button.
 f The  [P IN P MODE] screen...

Chapter 4 Settings — [P IN P] menu
126 - ENGLISH
14) Press qw to switch the item.
[MAIN WINDOW] Set frame lock to the input signal set in the main window.
[SUB WINDOW] Set frame lock to the input signal set in the sub window.
15) Press as to select [TYPE].
16)  
Press 
 qw to switch the item.
[MAIN WINDOW] The main window has display priority.
[SUB WINDOW] The sub window has display priority.
Note
 fThe P IN P function may not be available for some signals being input or terminals being selected. Refer...

Chapter 4 Settings — [TEST PATTERN] menu
ENGLISH - 127
[TEST PATTERN] menu
On the menu screen, select [TEST PATTERN] from the main menu.
Refer to “Navigating through the menu” (x
  page   67) for the operation of the menu screen.
 fPress 

qw to switch.
[TEST PATTERN]
Display the test pattern built-in to the projector.
Settings of position, size, and other factors will not be reflected in test patterns. Make sure to display the input signal before performing various 
adjustments.
1) Press  qw to switch...

Chapter 4 Settings — [SIGNAL LIST] menu
128 - ENGLISH
[SIGNAL LIST] menu
On the menu screen, select [SIGNAL LIST] from the main menu.
Refer to “Navigating through the menu” (x
  page   67) for the operation of the menu screen.
 rRegistered signal details
A1 (1-2)
When the signal of the address number (A1, A2, ...L7, L8) is registered Sub memory number
Memory number:
 f
A name can be set for each sub memory (x   page   130).
Registering new signals
After a new signal is input and the  button on the remote...

Chapter 4 Settings — [SIGNAL LIST] menu
ENGLISH - 129
2) Press the  button on the remote control.
 fThe  [REGISTERED SIGNAL DELETE] screen is displayed.
 fT

o cancel the deletion, press the  button to return to the  [REGISTERED SIGNAL LIST] screen.
3) Press the  button.
 fThe selected signal will be deleted.
Note
 fA registered signal can also be deleted from [REGISTERED SIGNAL DELETE] on the [REGISTERED SIGNAL SETUP] screen.
Protecting the registered signal
1) Press  asqw to select the signal to...

Chapter 4 Settings — [SIGNAL LIST] menu
130 - ENGLISH
Sub memory
The projector has a sub memory function that can register the multiple i\
mage adjustment data, even if it is recognized as the same signal by 
the frequency or format of the synchronization signal source.
Use this function when you need to adjust the picture quality such as switching of the aspect ratio or white balance by the same 
synchronization signal source. The sub memory includes all the data that can be adjusted for each signa\
l,...