Panasonic LCD Projector Pt Rz670 Operating Instructions

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 91
[DISPLAY OPTION] menu
On the menu screen, select [DISPLAY OPTION] from the main menu, and select an item from 
the sub-menu.
Refer to “Navigating through the menu” (x
  page   67) for the operation of the menu screen.
 fAfter selecting the item, press 

asqw to set.
[COLOR MATCHING]
Correct the color difference between projectors when using multiple projectors simultaneously.
Adjusting the color matching as desired
1) Press  as to select [COLOR...

Chapter 4 Settings — [DISPLAY OPTION] menu
92 - ENGLISH
Adjusting the color matching using a colorimeter
Use a colorimeter that can measure chromaticity coordinates and luminance to change the colors [RED], [GREEN], [BLUE], [CYAN], 
[MAGENTA], [YELLOW], or [WHITE] to desired colors.
1) Press  as to select [COLOR MATCHING].
2)  
Press 
 qw to select [MEASURED].
3)
 
Press the  button.
 f The  [MEASURED MODE] screen is displayed.
4) Press  as to select [MEASURED DATA].
5)  
Press the  button.
 f The...

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 93
Model No.[SCREEN FORMAT] Range when [SCREEN POSITION] is selected
PT
-
 RZ670 [16:10]
Cannot be adjusted.
[4:3] Adjusts the horizontal position between 
-160 and 160.
[16:9] Adjusts the vertical position between 
-60 and 60.
PT
-

RW630 [16:10]
Cannot be adjusted.
[16:9] Adjusts the vertical position between 
-40 and 40.
4) Press as to select [SCREEN POSITION].
 fWhen [SCREEN FORMA T] is set to [16:10], [SCREEN POSITION] cannot be selected and...

Chapter 4 Settings — [DISPLAY OPTION] menu
94 - ENGLISH
4) Press qw to switch the item.
[ON] Adjust the screen position and size when automatic setup is executed.
[OFF] Does not perform automatic adjustment.
Adjusting signal level automatically
1) Press as to select [AUTO SETUP].
2)  
Press the  button.
 f The  [AUTO SETUP] screen is displayed.
3) Press  as to select [SIGNAL LEVEL ADJUST].
4)  
Press 
 qw to switch the item.
[OFF] Does not perform automatic adjustment.
[ON] Adjusts black level (on-screen...

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 95
2) Press the  button.
 fThe  [RGB IN] screen is displayed.
3) Press  as to select [RGB1 INPUT SETTING].
4)  
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[RGB/YPBPR] Select this item when an RGB signal or YCBCR/YPBPR signal is being input to the  
terminal.
[VIDEO] Select this item when a video signal is being input to the  () terminal.
[Y/C] Select this item when a luminance signal and color signal are...

Chapter 4 Settings — [DISPLAY OPTION] menu
96 - ENGLISH
 f[30Hz], [25Hz], or [24Hz] can be selected only when [1920x1080p] is selected for [RESOLUTION].
10) Press the  button.
 fThe confirmation screen is displayed.
11) Press  qw to select [OK], and press the  button.
Note
 f The setting details are displayed in [RESOLUTION] and [VER TICAL SCAN FREQUENCY] of [EDID STATUS]. fThe resolution and vertical scanning frequency settings may be required \
on your computer or video device. fAfter configuring...

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 97
[USER]Sets [RESOLUTION] or [VERTICAL SCAN FREQUENCY] item to EDID.
 fWhen [DEF

AULT] or [SCREEN FIT] is selected, proceed to Step  10).
6) Press the  button.
 fThe  [RESOLUTION] screen is displayed.
7) Press  asqw to select [RESOLUTION].
 fSelect [1024x768p], [1280x720p], [1280x768p], [1280x800p], [1280x1024p], [1366x768p], [1400x1050p], [1440x900p], [1600x900p], 
[1600x1200p], [1680x1050p], [1920x1080p], [1920x1080i], or [1920x1200p].
8) Press the...

Chapter 4 Settings — [DISPLAY OPTION] menu
98 - ENGLISH
5) Press qw to switch [EDID MODE].
 fThe items will switch each time you press the button.
[DEFAULT] Standard setting.
[SCREEN FIT] Changes data of EDID according to the setting of [SCREEN FORMAT].
[USER] Sets [RESOLUTION] or [VERTICAL SCAN FREQUENCY] item to EDID.
 fWhen [DEF

AULT] or [SCREEN FIT] is selected, proceed to Step  10).
6) Press the  button.
 fThe  [RESOLUTION] screen is displayed.
7) Press  asqw to select [RESOLUTION].
 fSelect...

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 99
3) Press as to select [EDID MODE].
4)  
Press the  button.
 f The  [DIGITAL LINK EDID MODE] screen is displayed.
5) Press  qw to switch [EDID MODE].
 fThe items will switch each time you press the button.
[DEFAULT] Standard setting.
[SCREEN FIT] Changes data of EDID according to the setting of [SCREEN FORMAT].
[USER] Sets [RESOLUTION] or [VERTICAL SCAN FREQUENCY] item to EDID.
 fWhen [DEF

AULT] or [SCREEN FIT] is selected, proceed to Step  10).
6)...

Chapter 4 Settings — [DISPLAY OPTION] menu
100 - ENGLISH
3) Press as to select [BIT DEPTH].
4)  
Press 
 qw to switch the item.
[AUTO] Automatically select [12-bit] or [10-bit].
[12-bit] Fixes to [12-bit].
[10-bit] Fixes to [10-bit].
Setting [3G-SDI MAPPING]
1) Press as to select [SDI IN].
2)  
Press the  button.
 f The  [SDI IN] screen is displayed.
3) Press  as to select [3G-SDI MAPPING].
4)  
Press 
 qw to switch the item.
[AUTO] Automatically select [LEVEL A] or [LEVEL B].
[LEVEL A] Fixes to [LEVEL...